Resumen del contenido incluido en la página 1
Contents
AM/FM Tuner
Introduction.................................... 2
T-4355
Instruction Manual
Connections ................................. 10
Enjoying Audio Sources.............. 14
Thank you for purchasing an Onkyo AM/FM Tuner.
Troubleshooting........................... 20
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new Tuner.
Resumen del contenido incluido en la página 2
WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a risk of electr
Resumen del contenido incluido en la página 3
Precautions 1. Recording Copyright—Unless it’s for personal use For British models only, recording copyrighted material is illegal with- Replacement and mounting of an AC plug on the power out the permission of the copyright holder. supply cord of this unit should be performed only by 2. AC Fuse—The AC fuse inside the unit is not user- qualified service personnel. serviceable. If you cannot turn on the unit, contact IMPORTANT your Onkyo dealer. The wires in the mains lead are coloured in acc
Resumen del contenido incluido en la página 4
Features Before Using this Unit ❑ 30 AM/FM Presets • Turn off the power before changing the switch set- tings. ❑ Automatic AM/FM Scan Tuning • On changing the switch settings, T-4355 is initialized ❑ Selectable Character Display to its factory defaults. Radio presets and other set- ❑ RDS (PS/RT) (European models only) tings are deleted. ❑ Audiophile-Grade Capacitor ❑ Hi-Rigidity, Anti-Resonant Chassis ❑ Aluminium Front Panel ❑ RI Remote Compatible Supplied Accessories Make sure you have the fol
Resumen del contenido incluido en la página 5
Table of Contents Introduction Important Safety Instructions.....................................................................................2 Precautions..................................................................................................................3 Features .......................................................................................................................4 Supplied Accessories ...........................................................................
Resumen del contenido incluido en la página 6
Front & Rear Panels Front Panel For detailed information, refer to the pages in parentheses. POWER switch (14) FM MODE button (18) This switch is used to turn on/off the T-4355. This button is used to set the FM mode to stereo or mono. DISPLAY button (18) Display This button is used to view various information on the display. See next page. TUNING [ ]/[ ] buttons (14) BAND button (14) These buttons are used to tune into radio stations. This button is used to select the FM or AM band. The
Resumen del contenido incluido en la página 7
Front & Rear Panels—Continued Display MEM (Memory) indicator RDS indicator (European models only) This indicator lights up when storing radio presets. This indicator lights up when tuned to an FM station that supports RDS. AUTO indicator Message area This indicator lights up when the FM mode is Auto Stereo. Various information is displayed here, including preset number, tuning frequency, preset name, and /FM ST indicators so on. These indicators show the status of the radio recep-
Resumen del contenido incluido en la página 8
Remote Controller RC-627S Remote Controller (supplied with the A-9355/A-9155 Integrated Ampli- fier) BAND button (14) This button can be used to select the FM or AM band. If the T-4355 and A-9355/A-9155 are connected with an cable, pressing this button while the entire system is on Standby will turn on only the T-4355 and A-9355/A-9155. All other components will remain on Standby. FM MODE button (18) This button can be used to set the FM mode to ste- reo or mono. PRESET [+]/[–] button
Resumen del contenido incluido en la página 9
PHONO CD TUNER MD TAPE DOCK PO ONWER OFF A SPEAKERS B BASS TREBLE PHONES OFF OFF PURE DIRECT LOUDNESS MUTING STANDBY ON ON Remote Controller—Continued Using the Remote Controller The T-4355 doesn’t have its own remote controller, but it can be controlled by using the RC-627S remote con- troller that’s supplied with the Onkyo A-9355/A-9155 Integrated Amplifier. The T-4355 and A-9355/A-9155 must be connected with an cable and an audio cable for this to work. When controlling the T-4355 with t
Resumen del contenido incluido en la página 10
Connecting the T-4355 RCA Audio Connection Color Coding Before Making Any Connections • Refer to the instructions that came with the com- • Red connectors are used for the right channel, and ponent you are connecting. white connectors are used for the left channel. • Do not plug in the power cord until all other con- nections are complete. Left (white) L • Do not bind audio cables with power cords and speaker cables. Doing so may adversely affect the sound quality. Right (red) R • To prevent
Resumen del contenido incluido en la página 11
Connecting the T-4355—Continued About the System Functions If you connect the T-4355 to another Onkyo -capa- Notes: ble component with the supplied cable and audio • Push each plug in all the way to make a good connec- cable, you can use the following system functions. tion. cables are special cables solely for use with Onkyo • Use only dedicated cables for connections. products. cables are supplied with Onkyo tuners and play- ers (DVD, CD, etc.). Direct Change • Some components, including
Resumen del contenido incluido en la página 12
Connecting Antennas This section explains how to connect the supplied Connecting the AM Loop Antenna indoor FM antenna and AM loop antenna and how to connect commercially available outdoor FM and AM The supplied indoor AM loop antenna is for indoor use antennas. only. Assemble the AM loop antenna, inserting 1 AM antenna push terminals the tabs into the base, as shown. FM antenna jack Connect both wires of the AM loop 2 antenna to the AM push terminals, as shown. Connecting the Indoor FM An
Resumen del contenido incluido en la página 13
Connecting Antennas—Continued Connecting an Outdoor FM Antenna Connecting an Outdoor AM Antenna If you cannot achieve good reception with the supplied If good reception cannot be achieved using the supplied indoor FM antenna, try using a commercially available AM loop antenna, an outdoor AM antenna can be used outdoor FM antenna instead. in addition to the loop antenna, as shown. Outdoor antenna Insulated antenna cable AM loop antenna White Antenna adapter (not included) Black Notes: • Outdoor
Resumen del contenido incluido en la página 14
Turning On the T-4355 Listening to the Radio Tuning into Radio Stations Manually POWER TUNING Plug the power cord into a suit- 1 able wall outlet (or the AC OUT- BAND LET on the A-9355/A-9155’s rear panel). Use the [BAND] button to select 1 FM or AM. Press the T-4355’s [POWER] 2 switch. The band switches between FM and AM each time you press the button. The T-4355 turns on. To turn off the T-4355, press the Use the TUNING [ ]/[ ] buttons 2 [POWER] switch. to tune into a station. The tuning
Resumen del contenido incluido en la página 15
Listening to the Radio—Continued You can store up to 30 of your favorite radio stations as Presetting Stations Manually presets for quick selection. Stations can be preset auto- matically using the Auto Preset function or manually. Here you can tune into stations individually and store them as presets. This allows you to store stations in any Notes: order you like. • You can preset up to 30 AM/FM stations. If you try to store more than this, the message “FULL” will appear Notes: on the displ
Resumen del contenido incluido en la página 16
Listening to the Radio—Continued Selecting Preset Stations Press the [MEMORY] button. 3 MEM indicator You must store some presets before you can select them (see page 15). The MEM indicator appears and the preset number flashes. If you don’t PRESET BAND complete the next step within 8 sec- onds, the T-4355 will return to the pre- Before proceeding, turn on the T-4355. vious condition and the MEM indicator will disappear. Use the [BAND] button to select 1 FM or AM. Note: Be careful not to p
Resumen del contenido incluido en la página 17
Listening to the Radio—Continued Correcting Characters Naming Presets If Name Edit mode is not selected, follow steps 1 and 2 Radio presets can be named for easy identification, and in the left column. names may contain up to 8 characters from the follow- ing selection. DISPLAY TUNING _ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z " ' & ( ) [ ] * + , - . / = ? 0 1 2 3 4 5 6 7 8 9 PRESET The underscore (_) character is actually a spa
Resumen del contenido incluido en la página 18
Listening to the Radio—Continued Deleting Presets FM Mode Individual presets can be deleted as follows. In places where the signal strength is weak or reception is noisy, press the [FM Select the preset that you want to MODE] button to listen in mono (AUTO 1 delete. indicator off). This will reduce the noise See page 16 for selecting presets. and any break up in reception. To return to stereo, press the [FM MODE] While holding down the [MEM- 2 button again (AUTO indicator on). ORY] button,
Resumen del contenido incluido en la página 19
Listening to the Radio—Continued Using RDS (European models only) RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. Many FM sta- tions use it these days. The T-4355 supports the following types of RDS data: PS: Program Service Name When tuned to an RDS station that’s broadcasting PS information, the station’s name appears on the display. RT: Radio Text When tuned to an RDS station that’s broadcasting RT text information, the text scrolls across the dis
Resumen del contenido incluido en la página 20
Troubleshooting If you have any trouble using the T-4355, look for a solution here. If you can’t resolve the issue yourself, contact your Onkyo dealer. Power Can’t turn on the T-4355. • Make sure that the power cord is properly plugged into the wall outlet (page 14). • Unplug the power cord from the wall outlet, wait five seconds or more, then plug it in again. Audio There’s no sound. • The T-4355 is not connected properly. Check all connections and correct as necessary. • The wrong input sourc
