Resumen del contenido incluido en la página 1
MICRO COMPONENT SYSTEM
–Consists of CA-UXG4 and SP-UXG4
UX-G4
–Consists of CA-UXG3 and SP-UXG3
UX-G3
INSTRUCTIONS
LVT1364-002B
[B]
UX-G4_UX-G3.cover[B]B.p65 1 05.3.14, 0:50 PM
Resumen del contenido incluido en la página 2
Warnings, Cautions and Others CAUTION— (STANDBY/ON) button! IMPORTANT for the U.K. Disconnect the mains plug to shut the power off completely (all lamps DO NOT cut off the mains plug from this equipment. If the plug and indications go off). The (STANDBY/ON) button in any fitted is not suitable for the power points in your home or the cable position does not disconnect the mains line. is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your d
Resumen del contenido incluido en la página 3
SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮ Do read the operating instructions before you attempt to use the equipment. Do ensure that all electrical connections (including the mains plug, extension leads and inter
Resumen del contenido incluido en la página 4
Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. Power sources About This Manual •When unplugging the unit from the wall outlet, always pull This manual is organized as follows: on the plug, not the AC power cord. • This manual mainly explains operations using the DO NOT handle the AC power cord w
Resumen del contenido incluido en la página 5
Contents Location of the Buttons and Controls ............................. 3 Main Unit .................................................................................. 3 Remote Control ......................................................................... 5 Getting Started .................................................................. 6 Unpacking ................................................................................. 6 Connecting AM (MW) and FM Antennas ......................
Resumen del contenido incluido en la página 6
Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Main Unit Top view 1 COMPACT DIGITAL AUDIO OPEN 2 DAILY TIMER/SNOOZE 3 Front view q 4 COMPACT DIGITAL AUDIO 5 STANDBY VOLUME 6 – + CD TAPE FM/AM AUX 7 w #/8 PHONES DOWN UP AUX 4 7¢ REC 8 e r PUSH OPEN 9 t AUTO REVERSE p MICRO COMPONENT SYSTEM 3 01-05_UX-G4_UX-G3[B]3.p65 3 05.2.14, 8:26 PM
Resumen del contenido incluido en la página 7
Continued Display window w 16 2345 78 9pq REC SLEEP SNOOZE MONO ST MP3 SOUND BASS REC ON OFF DAILY 123 MHz kHz ALL GR. PRGM RANDOM RDS TOTAL REMAIN A.STANDBY e r ty u i o ; a s See pages in parentheses for details. Main unit Display window 1 Disc cover (10) 1 DAILY 1/2/3 (timer number) indicator 2 ) OPEN (disc cover open) (10) 2 (timer) indicator 3 DAILY TIMER/SNOOZE button (22) 3 ON/OFF (timer on-time/off-time) indicators 4 Remote sensor (5) 4 REC (recording timer) indicator 5 STANDBY lamp (8)
Resumen del contenido incluido en la página 8
Remote Control See pages in parentheses for details. 1 STANDBY/ON button (8, 22) 2 SLEEP button (23) 3 CLOCK/TIMER button (8, 21) 4 SET button (8, 15, 21, 22) 5 CANCEL button (21, 22) w 6 Source buttons STANDBY/ON DISPLAY FM MODE A. STANDBY • CD 3¥8, TAPE 2 3, FM/AM, AUX e 1 Pressing one of these buttons also turns on the unit. r SLEEP 7 RANDOM button (13) 123 2 8 PROGRAM button (11, 12) CLOCK /TIMER 9 Multi control buttons 456 3 t • PRESET GROUP /UP, PRESET GROUP /DOWN SET • 4, 7, ¢ 78 9 4 p
Resumen del contenido incluido en la página 9
FM 75 COAXIAL AM LOOP FM 75 COAXIAL AM LOOP Do not connect the AC power cord until all other Getting Started connections have been made. Continued Unpacking Connecting Speakers After unpacking, check to be sure that you have all the You can connect the speakers using the speaker cords. following items. The number in parentheses indicates the quantity of each piece supplied. 1 2,3 • FM antenna (1) • AM (MW) loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult y
Resumen del contenido incluido en la página 10
Do not connect the AC power cord until all other connections have been made. To remove the speaker grilles Putting the Batteries into the Remote Control The speaker grilles are removable as the illustration below. Insert the batteries—R03(UM-4)/AAA(24F)—into the Holes Projections remote control by matching the polarity (+ and –) on the batteries with the + and – marking on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time. 1
Resumen del contenido incluido en la página 11
Common Operations Continued To adjust the clock Setting the Clock On the remote control ONLY: Before operating the unit any further, first set the unit’s clock. When you plug in the power cord, “0:00” starts flashing on CLOCK 1 Press CLOCK/TIMER repeatedly /TIMER the display. to show the current time indication. You can set the clock when the unit is either turned on or in The hour indication starts flashing. standby mode. 2 Repeat steps 2 and 3 on the left column. On the remote control ONLY: C
Resumen del contenido incluido en la página 12
Selecting the Source Selecting the Sound Modes To select the source, press CD 6, TAPE 2 3, FM/AM, or You can select one of the 4 sound modes. AUX. •This function also affects the sound from headphones. • When you select CD as the source, playback starts •This function only affects the playback sound, and does not automatically. affect your recording. To operate the CD player, see pages 10 to 13. To operate the tape deck, see page 14. On the remote control ONLY: To operate the tuner (FM or AM (MW
Resumen del contenido incluido en la página 13
Playing Back Discs Continued This unit has been designed to play back the following Playing Back the Entire Disc—Normal Play discs—CD, CD-R, and CD-RW. Only CDs bearing these marks can be used with this Systems. 1 Press ) OPEN on top of the unit. The disc cover opens. Recordable ReWritable •You can insert a disc while listening to another source. You can play back the discs containing the tracks in music 2 Place a disc correctly with its label side up. CD format or MP3 files in ISO 9660 format.
Resumen del contenido incluido en la página 14
Tag To remove the disc, press ) OPEN on the unit, then To locate a particular point in a track UP take out the disc by holding it at the edges while pressing the During play, press and hold ¢ or 4 (or PRESET GROUP unit’s pivot lightly. UP ¢ or DOWN 4 on the unit). DOWN PRESET • ¢ (UP ¢): Fast-forwards the GROUP tracks. • 4 (DOWN 4): Fast-reverses the • If the disc cannot be read correctly (because it is scratched, tracks. for example) or an unreadable CD-R or CD-RW is inserted Playback will no
Resumen del contenido incluido en la página 15
Continued Repeating Tracks—Repeat Play 5 Press CD 3/8. CD 3/8 The tracks are played in the order you have You can have all the tracks, the program or individual track programed. currently playing, repeat as many times as you like. On the remote control ONLY: REPEAT Press REPEAT repeatedly before or When you finished programming the 60th track during playback. RDS SEARCH “FULL” will appear on the display. • Each time you press the button, Repeat Play UP changes as follows, and the following repe
Resumen del contenido incluido en la página 16
Playing at Random—Random Play Displaying the Remaining Time during Playback You can play the tracks at random. You can display the remaining time of the current track/disc On the remote control ONLY: and the elapsed time of the current track/disc during playing. RANDOM Press RANDOM. On the remote control ONLY: The RANDOM and indicators light up on the REMAIN display. Press REMAIN repeatedly. RDS MODE When playing back audio CD: RANDOM • Each time you press the button, the display changes as fol
Resumen del contenido incluido en la página 17
Playing Back Tapes Playing Back a Tape If no cassette is inserted when you press TAPE ¤ ‹ You can play back type I tapes only. “NO TAPE” appears on the display. UP PRESET 1 Press PUSH OPEN. GROUP To stop playing, press 7. The cassette holder opens. PUSH OPEN DOWN PRESET GROUP DOWN UP 4 7 ¢ UP To fast-wind to the left or to the right, PRESET GROUP press ¢ or 4 (or UP ¢ or DOWN DOWN 4 on the unit). PRESET GROUP 2 Put a cassette in with the exposed part of the The tape direction indicator ( 3 or 2
Resumen del contenido incluido en la página 18
Listening to FM and AM (MW) Broadcasts Tuning in to a Station Presetting Stations You can preset 30 FM and 10 AM (MW) stations manually. FM/AM 1 Press FM/AM to select either “FM” In some cases, test frequencies have been already stored or “AM (MW).” for the tuner since the factory examined the tuner preset The unit automatically turns on and tunes in to function before shipment. This is not a malfunction. You the previously received station—either FM or AM (MW). can preset the stations you want
Resumen del contenido incluido en la página 19
Continued Tuning in to a Preset Station Receiving FM Stations with RDS RDS (Radio Data System) allows FM stations to send an On the remote control ONLY: additional signal along with their regular program signals. FM/AM For example, the stations send their station names, as well as 1 Press FM/AM to select either “FM” information about what type of program they broadcast, such or “AM (MW).” as sports or music, etc. The unit automatically turns on and tunes in to When tuned in to an FM station whi
Resumen del contenido incluido en la página 20
Description of the PTY codes Searching for Programs by PTY Codes (PTY Search) NEWS News. AFFAIRS Topical program expanding or enlarging upon the One of the advantages of RDS is that you can locate a news—debate, or analysis. particular kind of program by specifying the PTY codes. INFO Program the purpose of which is to impart advice in •For details on the PTY codes, see “Description of the PTY the widest sense. codes” on the right column. •There is a time limit in doing the following steps. If t
