Resumen del contenido incluido en la página 1
COMPACT COMPONENT SYSTEM
–Consists of CA-FSH100 and SP-FSH100
FS-H100
For Customer Use:
INSTRUCTIONS
Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1109-001B
[J]
FS-H100[J]cover_001B.p65 1 04.2.11, 0:05 PM
Resumen del contenido incluido en la página 2
Warnings, Cautions and Others CAUTION— STANDBY/ON button! CAUTION Disconnect the mains plug to shut the power off completely (all RISK OF ELECTRIC SHOCK lamps and indications go off). The STANDBY/ON button in DO NOT OPEN any position does not disconnect the mains line. • When the unit is on standby, the STANDBY lamp lights red. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. • When the unit is turned on, the STANDBY lamp goes off. DO NOT REMOVE COVER (OR BACK)
Resumen del contenido incluido en la página 3
Contents Introduction ....................................................................... 2 Location of the Buttons and Controls ............................. 3 Main Unit .................................................................................. 3 Remote Control ......................................................................... 5 Getting Started .................................................................. 6 Unpacking ......................................................
Resumen del contenido incluido en la página 4
Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. Power sources About This Manual • When unplugging the unit from the wall outlet, always pull This manual is organized as follows: on the plug, not the AC power cord. • This manual mainly explains operations using the DO NOT handle the AC power cord
Resumen del contenido incluido en la página 5
Location of the Buttons and Controls Continued Become familiar with the buttons and controls on your unit. Main Unit Top view 1 COMPACT DIGITAL AUDIO OPEN 2 Front view p 3 COMPACT DIGITAL AUDIO 4 STANDBY VOLUME 5 – + CD TAPE FM/AM AUX 6 q #/8 PHONES DOWN UP AUX 4 7¢ TIMER 7 w e 8 9 FS–H100 COMPACT COMPONENT SYSTEM r 3 01-05_FS-H100[J]2.p65 3 04.1.30, 3:30 PM
Resumen del contenido incluido en la página 6
Location of the Buttons and Controls (continued) Display window 1 2 3 4 5 6 7 8 9 p MP3 123 ALL RANDOM MONOST REC SLEEP PRGM SOUND q See pages in parentheses for details. Main unit Display window 1 Disc cover (12) 1 SLEEP indicator 20 OPEN (disc cover open) (12) 2 (timer) indicator 3 Remote sensor (5) 3 Timer number indicator 4 STANDBY lamp (8) 4 MP3 indicator 5 (STANDBY/ON) button (8, 19) 5 Repeat indicators 6 Source buttons • , ALL • CD #¥8, TAPE, FM/AM, AUX 6 PRGM (program) indicator Pressing
Resumen del contenido incluido en la página 7
Remote Control See pages in parentheses for details. 1 Number buttons (10, 11, 13) 2 Multi control buttons • PRESET UP, PRESET DOWN •4, 7, ¢ 3 Source buttons STANDBY/ON • CD #¥8, TAPE, FM/AM, AUX 1 2 3 Pressing one of these buttons also turns on the unit. 8 4 5 6 4 REPEAT button (14) SLEEP 9 5 PLAY MODE button (10, 13, 14) 1 CLOCK/ 7 8 9 TIMER 6 SOUND button (9) p 7 BASS/TREBLE button (9) 10 +10 REMAIN DISPLAY 8 STANDBY/ON button (8, 19) q PRESET UP SET 9 SLEEP button (20) w p CLOCK/TIMER butt
Resumen del contenido incluido en la página 8
Getting Started Unpacking Connections After unpacking, check to be sure that you have all the To connect speakers following items. You can connect the speakers using the speaker cords. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) 1 2,3 • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately. Putting the Batteries into the Remote Control Insert the batteries—R6(SUM-3)/AA(15F)—into the remote control by matching
Resumen del contenido incluido en la página 9
ANTENNA AM LOOP FM ANTENNA To connect AM and FM antennas Connecting Other Equipment To connect audio equipment You can connect audio equipment—used only as a playback 1 AM loop antenna device. (supplied) • DO NOT connect any equipment while the power is on. • DO NOT plug in any equipment until all connections are complete. For playing other equipment through this unit, connect between the audio output jacks on the other equipment and AUX jacks by using audio cords with mini plugs (not supplied)
Resumen del contenido incluido en la página 10
Basic and Common Operations To show the clock when the unit is turned on Setting the Clock On the remote control ONLY: Before operating the unit any further, first set the unit’s clock. When you plug in the power cord, “AM12:00” starts flashing DISPLAY Press DISPLAY. on the display. • Each time you press the button, the display You can set the clock when the unit is either turned on or in changes the clock indication and the normal standby mode. indication alternately. On the remote control ONLY
Resumen del contenido incluido en la página 11
Selecting the Source Selecting the Sound Modes To select the source, press CD 6, TAPE, FM/AM, or You can select one of the 4 sound modes. AUX. • This function also affects the sound from headphones. • When you select CD as the source, playback starts • This function only affects the playback sound, and does not automatically. affect your recording. To operate the tuner (FM or AM), see pages 10 and 11. To operate the CD player, see pages 12 to 14. On the remote control ONLY: To operate the tape d
Resumen del contenido incluido en la página 12
Listening to FM and AM Broadcasts On the remote control ONLY: Tuning in to a Station 1 Tune in to the station you want to preset. 1 Press FM/AM to select either “FM” FM/AM • See “Tuning in to a Station” on the left column. or “AM.” PLAY The unit automatically turns on and tunes in to 2 Press PLAY MODE. MODE The preset number starts flashing on the the previously received station—either FM or AM. display. • Each time you press the button, the band alternates • The PRGM (program) indicator lights
Resumen del contenido incluido en la página 13
Tuning in to a Preset Station On the remote control ONLY: FM/AM 1 Press FM/AM to select either “FM” or “AM.” The unit automatically turns on and tunes in to the previously received station—either FM or AM. • Each time you press the button, the band alternates between FM and AM. PRESET UP 2 Press PRESET UP or PRESET DOWN repeatedly to select a preset number. PRESET DOWN To tune in to a preset station directly using the number buttons On the remote control ONLY: Pressing the number button(s) allow
Resumen del contenido incluido en la página 14
Playing Back Discs This unit has been designed to play back the following 2 Place a disc correctly discs—CD, CD-R, and CD-RW. with its label side up, You can play back the discs containing the tracks in music then press down on the CD format or MP3 files in ISO 9660 format. portions around the • In this instruction, we call a disc recorded MP3 files “MP3 disc’s center hole until disc,” and “file” is also referred to as “track.” you hear a click. When playing CD-Rs or CD-RWs • Before playing CD-R
Resumen del contenido incluido en la página 15
Continued Basic Disc Operations PLAY 2 Press PLAY MODE. MODE The PRGM (program) indicator appears on the While playing a disc, you can do the following operations. display. To stop playing for a moment PRGM During play, press CD 3/8. CD3/8 While pausing, the elapsed playing time flashes on the display. 3 Press ¢ or 4 to select the To resume playing, press CD 3/8 again. track number, then press PLAY MODE. To go to another track Track number Program step number Before or during play, press ¢ or
Resumen del contenido incluido en la página 16
Playing Back Discs (continued) To modify the program Playing at Random—Random Play Press PLAY MODE repeatedly until the program PLAY MODE You can play the tracks at random. step number you want to modify appears. Then follow steps 3 and 4 of the programming procedure. On the remote control ONLY: To add tracks in the program, press PLAY MODE PLAY Press PLAY MODE during playing. MODE repeatedly until “00” appears as the track number. Then The RANDOM indicator lights up on the display. follow steps
Resumen del contenido incluido en la página 17
Playing Back Tapes For tape operations, use buttons on the unit. TAPE 4 Press TAPE. The unit automatically turns on and the Playing Back a Tape source changes to the tape deck. • You can select to the tape by pressing You can play back type I tapes only. TAPE on the remote control. On the unit ONLY: 5 Press # (play). The tape starts playing. 1 Press &/) (stop/cassette holder open). • When the end of the tape is reached, The cassette holder opens. playing stops. To stop playing, press &/). To sto
Resumen del contenido incluido en la página 18
Using an External Equipment Listening to the External Equipment You can listen to the external equipment such as MD recorder, cassette deck, or other auxiliary. • First, make sure that the external equipment is properly connected to the unit. (See page 7.) 1 Set the volume level to the minimum position. 2 Press AUX. “AUX” appears on the display. 3 Start playing the external equipment. 4 Adjust the volume level to the level you want to listen to. To exit AUX mode, select other source. For operati
Resumen del contenido incluido en la página 19
Recording Continued IMPORTANT: Recording on a Tape • It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video On the unit ONLY: recording, broadcast or cable program and in any literary, dramatic, musical, or artistic embodied 1 Put a recordable cassette in with the exposed therein. part of the tape down. • The recording level is automatically set correctly, so it is • See also page 15. not
Resumen del contenido incluido en la página 20
Recording (continued) Recording Discs —Disc Synchronized Recording You cannot press ‡ (recording) in the following cases: • If no cassette is inserted. You can start disc play and recording at the same time. • If a protected cassette is inserted. On the unit ONLY: To stop recording for a moment, press *. The recording is paused, but the CD playback 1 Put a recordable cassette in with the exposed does not stop. part of the tape down. To resume recording, press * again. • See also page 15. To stop
