Resumen del contenido incluido en la página 1
AV SURROUND RECEIVER
AVR-4802
OPERATING INSTRUCTIONS
MASTER VOLUME
INPUT SELECTOR
))
·
SIGNAL SURROUND BACK CH VOLUME LEVEL
REMOTE PURE
SENSOR SIGNAL
DIGITAL DIRECT OUTPUT DETECT
INPUT
ON/STANDBY AUTO PCM DTS A B
ES DSCRT DVD DIGITAL
ON/STANDBY SURROUND SPEAKER
HOME PURE
THX CINEMA DIRECT
PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER AVR-4802
We greatly appreciate your purchase of the AVR-4802.
2
To be sure you take maximum advantage of all the features the AVR-4802 has to offer, read these i
Resumen del contenido incluido en la página 2
2 SAFETY PRECAUTIONS CAUTION CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG RISK OF ELECTRIC SHOCK TO WIDE SLOT, FULLY INSERT. DO NOT OPEN ATTENTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTERODUIRE LA USER-SERVICEABLE PARTS INSIDE. REFER LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE SERVICING TO QUALIFIED SERVICE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’ AU PERSONNEL. FOND. The lightning flash with arro
Resumen del contenido incluido en la página 3
SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating 12. Power-Cord Protection – Power-supply cords should be instructions should be read before the appliance is routed so that they are not likely to be walked on or operated. pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience 2. Retain Instructions – The safety and operating instructions receptacles, and the point where they exit from the should be retained for future refer
Resumen del contenido incluido en la página 4
2 INTRODUCTION Thank you for choosing the DENON AVR-4802 Digital Surround A / V receiver. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding. TABLE OF
Resumen del contenido incluido en la página 5
3 CAUTIONS ON HANDLING • Switching the input function when input jacks are not • Whenever the AVR-4802 is in the STANDBY state, the connected apparatus is still connected on AC line voltage. A clicking noise may be produced if the input function is switched Please be sure to unplug the cord when you leave home for, when nothing is connected to the input jacks. If this happens, say, a vacation. either turn down the MASTER VOLUME control or connect components to the input jacks. • Muting of PRE OU
Resumen del contenido incluido en la página 6
5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Note that binding pin plug cords together with AC cords or placing them near a power • Be sure to connect the left and right channels properly (left with left, right with right). transformer will result in generating hum or other noise. • Insert the plugs securely. Incomplete connections will result in the generation of • Noise or humming may be generated if a connected audio equipment is used noise. independ
Resumen del contenido incluido en la página 7
Connecting video components • To connect the video signal, connect using a 75 Ω /ohms video signal cable cord. Using an improper cable can result in a drop in picture quality. • When making connections, also refer to the operating instructions of the other components. TV or DBS/SAT tuner AUDIO B VIDEO OUT R L OUT R L Connecting a TV, DBS/SAT tuner Monitor TV TV or DBS/SAT • Connect the TV’s or DBS/SAT tuner’s video output jack (VIDEO OUTPUT) to VIDEO the VIDEO (yellow) TV,DBS/SAT IN jack using a
Resumen del contenido incluido en la página 8
Connecting a video component equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other. • Precaution when using S-jacks This unit’s S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video signals input from the S-jacks are only output from the S-jack o
Resumen del contenido incluido en la página 9
Connecting a Video Component Equipped with Color Difference (Component - Y, PB/CB, PR/CR) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video
Resumen del contenido incluido en la página 10
Connecting the antenna terminals DIRECTION OF AM LOOP ANTENNA BROADCASTING (Supplied) STATION FM ANTENNA F-type converter plug (attached) FEEDER • When using the FM antenna CABLE attach to this apparatus SPEAKER SYSTEMS LOOP ANT. IN DVD 75 Ω /ohms AM FRONT COAXIAL R YPB/CB PR/CR PRE OUT CABLE IN FR FL CENTER FM COAX. 75Ω SW C DVD VDP TV SURROUND -A SR SL R SBR SBL SURROUND ANTENNA -B R I SIGNAL PHONO CD DVD VDP TV GND SB / MULTI L R FM INDOOR R ANTENNA POWER AMP EXT. IN (Supplied) OUT FRONT
Resumen del contenido incluido en la página 11
Connecting the external input (EXT. IN) jacks • These jacks are for inputting multi-channel audio signals from an outboard decoder, or a component with a different type of multi-channel decoder, such as a Super Audio DVD player, or a multi-channel SACD player, or other future multi-channel sound format decoder. • When making connections, also refer to the operating instructions of the other components. DVD VDP TV DBS/ V. AUX VCR-1 VCR-2 VCR-3 VCR-1 VCR-2 VCR-3 SURROUND SAT -A SR SL R SBR SBL SUR
Resumen del contenido incluido en la página 12
Speaker system connections • Connect the speaker terminals with the speakers making sure that like Speaker Impedance polarities are matched ( < with < , > with > ). Mismatching of polarities will • Speakers with an impedance of from 6 to 16 Ω /ohms can be connected for result in weak central sound, unclear orientation of the various instruments, use as front and center speakers. and the sense of direction of the stereo being impaired. • Speakers with an impedance of 6 to 16 Ω /ohms can be connec
Resumen del contenido incluido en la página 13
Connections • When making connections, also refer to the operating instructions of the other components. Connection jack for FRONT SPEAKER SYSTEMS CENTER SPEAKER SYSTEM SURROUND SPEAKER subwoofer with built-in SYSTEMS (A) amplifier (super woofer), etc. ( ) ( ) ( ( ) ) L R L R IN SPEAKER SYSTEMS LOOP ANT. IN DVD IN TV IN DBS/ OUT MONITOR SPEAKER SYSTEMS • Precautions when SAT FRONT AM FRONT COMPONENT R L placing speakers VIDEO YPB/CB PR/CR YPB/CB PR/CR YPB/CB PR/CR YPB/CB PR/CR PRE OUT IN OUT O
Resumen del contenido incluido en la página 14
6 PART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). #6 #5#4#3#2#1#0 @9@8@7 @6 @5 @4 MASTER VOLUME INPUT SELECTOR SIGNAL SURROUND BACK CH REMOTE VOLUME LEVEL PURE SIGNAL SENSOR DIGITAL DIRECT OUTPUT DETECT INPUT ON/STANDBY AUTO PCM DTS A B ES DSCRT DVD DIGITAL ON/STANDBY SURROUND SPEAKER PURE HOME DIRECT THX CINEMA !6!7!8 !9@0@1 @2@3 SURROUND MODE MULTI FUNCTION WIDE 5CH / 7CH DSP TONE SURROUND SELECT TONE PHONES DIREC
Resumen del contenido incluido en la página 15
Remote control unit • For details, refer to the separate (supplied) RC-8000 operating instructions. q o w !0 !1 y e u r i !2 t Transmitter VOL. (volume) up/down buttons q u Touch panel LIGHT (back light) button w i CHANNEL up/down buttons Battery charging contacts e o MUTE button RF frequency selector switch r !0 USB terminal Reset button t !1 Jog stick (PUSH ENTER) Battery cover y !2 The USB terminal is a terminal that will be used in the future to update the microprocessor program, etc. 15
Resumen del contenido incluido en la página 16
7 SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the various settings described below on the monitor screen using the AVR-4802’s on-screen display function. These settings are required to set up the listening room’s AV system centered around the AVR-4802. • Use the following buttons to set up the system: Transmission codes of independent buttons Screen while icons are displayed CHANNEL• : Tuner pr
Resumen del contenido incluido en la página 17
NOTES: • The on-screen display signals are not output from the MONITOR OUT-2 output jack or the color difference (component) video signal (MONITOR OUT) jacks. • The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-4802’s S-Video and video monitor output jacks and signals are input to the AVR-4802 from a video source (VDP, etc.) connected to both the S-Video and vide
Resumen del contenido incluido en la página 18
Before setting up the system Check that all the connections are ON / STANDBY correct, then turn on the main unit’s 1 1 power. (Main unit) Either lightly press on the remote control unit’s touch panel or press the LIGHT button to turn on the liquid crystal display. 2 (The back light does not turn on when the touch panel is pressed.) 2, 5, 6, 7, 8 By default the liquid crystal display is set to display for 30 seconds, but this can be changed to approximately 120 3 4, 7, 8 seconds using the procedu
Resumen del contenido incluido en la página 19
Setting the type of speakers • The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used. Press “CURSOR/PAGE” at the center of the bottom line on the “AV AMP’s” “SETTING 3/5” page so that this part is displayed in half-tone dot mesh. 1 Make the system setups by pushing the jog stick on the remote control unit forward and backward, left and right. At the System Setup Menu sel
Resumen del contenido incluido en la página 20
• Parameters Large................Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode. Small ................Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode. When this is set, bass sound with a frequency below the frequency set for the Crossover Frequency mode is sent to the subwoofer or main
