Resumen del contenido incluido en la página 1
OPERATING INSTRUCTIONS En (English)
Compact Disc
Stereo System
MANUAL DE INSTRUCCIONES
E (Español)
XR-MG9
MODE D'EMPLOI F (Français)
U
For assistance and information
(United States and Puerto Rico)
8B-CLR-903-01
010601AYK-H-B
Resumen del contenido incluido en la página 2
PRECAUTIONS Read these Operating Instructions carefully and completely 8 Wall or ceiling mounting — The unit should not be WARNING before operating the unit. All precautions in this booklet and mounted on a wall or ceiling, unless specified in the on the unit should be strictly followed. Operating Instructions. To reduce the risk of fire or electric shock, do not expose Keep the Operating Instructions for future reference. this appliance to rain or moisture. Electric Power Installation 1 Power s
Resumen del contenido incluido en la página 3
Outdoor Antenna Damage Requiring Service TABLE OF CONTENTS 1 Power lines — When connecting an outdoor antenna, Have the unit serviced by a qualified service technician if: PRECAUTIONS .................................... 2 make sure it is located away from power lines. - The AC power cord or plug has been damaged 2 Outdoor antenna grounding — Be sure the antenna - Foreign objects or liquid have gotten inside the unit PREPARATIONS ................................... 4 system is properly grounded
Resumen del contenido incluido en la página 4
PREPARATIONS 3 Connect the supplied antennas. Connection Remote control Connect the FM antenna to the FM 75 terminals and Plug in the AC power cord to the AC outlet after all other While sliding the latch, pull out the battery holder from the the AM antenna to the AM LOOP jack. connections are made. bottom of the remote control. Place the supplied battery on the battery holder with correct polarity. Finally, insert the holder 1 Connect the speaker cords to the speakers. AM antenna back into pos
Resumen del contenido incluido en la página 5
PARTS AND CONTROLS Main unit: rear AUX/VIDEO IN jacks 3 AM LOOP jack and FM 75 terminals Accept analog sound signals from external equipment. Plug in the supplied AM and FM antennas. 1 Connect external equipment using an optional connecting 4 SUPER WOOFER3 jack cable with RCA phono plugs (red plug to the R jack, white 2 Connect an optional powered sub woofer with a built-in plug to the L jack). Refer also to the operating instructions amplifier to this jack. En for your equipment. 3 To switch
Resumen del contenido incluido en la página 6
Main unit: front 3 DEMO/ECO When the unit is turned off: selects DEMO mode or displays the clock (when ECO mode is deactivated). When the unit is turned on: selects ECO mode on and off. En 1 4 PHONES jack Plug in optional headphones set with a stereo mini plug 1 2 5 (ø3.5 mm, /8 in.). Speaker output is canceled. 6 3 5 VOLUME UP, DOWN Adjusts the volume. 4 6 FUNCTION Switches the active function among FM/AM, AUX (VIDEO or TV) and CD. TUNER/BAND 1 POWER 6STANDBY/ON Selects radio function and the r
Resumen del contenido incluido en la página 7
Remote control 2 The numbered buttons take on these functions when pressed with 6 POWER SHIFT held down: 7 TUNER/BAND Selects radio function and the radio band. RANDOM/REPEAT 1,2 Selects random or repeat CD playback mode. 7 AUX En Selects the function of external equipment connected to PROGRAM 3 8 the AUX/VIDEO IN jacks. Selects programmed CD playback mode. 4 9 CD DISPLAY Selects CD function. CD: displays the track number being played, remaining 5 0 time of play and current volume level. 8 EQ/QS
Resumen del contenido incluido en la página 8
ADJUSTMENTS BEFORE OPERATION When the power economizing mode is activated POWER VOLUME UP/ "GOOD-BYE" is displayed for 4 seconds, and everything 6STANDBY/ON s DOWN on the display clears. DEMO/ECO a f,g Only the red indicator on the POWER button lights to show that power is being supplied to the unit. TUNER/BAND, CLOCK AUX, CD Standby power consumption T-BASS EQ/ When the power economizing mode is activated: 1.0 W En QSURROUND SHIFT When the power economizing mode is deactivated: 12.0 W ENTER f,
Resumen del contenido incluido en la página 9
SOUND ADJUSTMENTS Setting the clock Equalizer Q SURROUND system 1 Hold down SHIFT and press CLOCK on the remote Selects a sound equalization curve to match the music type. The Q SURROUND system built into this unit uses only two control. speakers at the left and right to create an atmosphere that Press EQ (EQ/QSURROUND on the remote control) When the unit is turned off, you can also press a or sounds as if you are surrounded by two front speakers and repeatedly to select one of the three equaliz
Resumen del contenido incluido en la página 10
CD OPERATIONS RANDOM/ PROGRAM Random/Repeat playback f,g VOLUME UP/ REPEAT Random playback plays all the tracks in random order. Repeat DOWN asc playback plays all the tracks or the track being played repeatedly. 0-10,+10 You can select random and repeat all playback at the same DISPLAY time. CD 1 Hold down SHIFT and press RANDOM/REPEAT En SHIFT on the remote control repeatedly to select one of the following modes: f,g Repeat 1 playback: " 1" " cPRESET VOLUME Repeat all playback: " " " (N,M) aSE
Resumen del contenido incluido en la página 11
To check the program Programmed playback Press f or g repeatedly in stop mode. The track Plays back up to 30 selected tracks in programmed order. number and program number are displayed in succession. 1 Hold down SHIFT and press PROGRAM on the To clear the program remote control in stop mode. Press s in stop mode. "PRGM" disappears on the display. "PRGM" flashes on the display. To add tracks to the program 2 Press the numbered buttons on the remote Repeat step 2 before starting playback. The tra
Resumen del contenido incluido en la página 12
RADIO OPERATIONS Tuning in preset stations POWER 6STANDBY/ON s/CLEAR 1 Select the band. a/SET c/PRESET 2 Press c repeatedly. 0-10,+10 TUNER/ With each press, the station with the succeeding preset BAND number is tuned in. TUNER MONO You can tune in the desired preset station directly by En pressing the numbered buttons on the remote control. SHIFT - To select preset number 10, press 10. f,g - To select preset number 15, press +10 and 5. cPRESET To clear a preset station sCLEAR 1 Tune in the stat
Resumen del contenido incluido en la página 13
TIMER OPERATIONS Adjustments POWER 6STANDBY/ON To switch to monaural FM reception a/SET Hold down SHIFT and press TUNER MONO on the remote control so that "MONO" is displayed. SLEEP To cancel, press again to display "STEREO." TIMER TUNER/BAND, AUX, CD Tip: When FM stereo reception is poor, switching to monaural En ENTER SHIFT reduces noise. f,g To switch the AM tuning interval The default setting of the AM tuning interval is 10 kHz/step. If POWER you use this unit in an area where the frequency
Resumen del contenido incluido en la página 14
REFERENCE 5 Press f or g to set the timer-activated To check the timer setting Care and maintenance duration, then press ENTER or a. Hold down SHIFT and press TIMER. Occasional care and maintenance of the unit and the software With each press, the timer-activated duration changes in The timer-on time, the source and the timer-activated duration are needed to optimize the performance of your unit. 5-minute steps between 5 to 240 minutes. are displayed for 4 seconds. If there is no button input fo
Resumen del contenido incluido en la página 15
Poor radio reception GENERAL Specifications •Check antenna connection. Adjust the antenna to find the Power requirements 120 V AC, 60 Hz MAIN UNIT CX-LMG9 Power consumption 60 W best reception. •Move unit and antenna away from other electric appliances TUNER Power consumption With ECO mode on: 1.0 W FM tuning range 87.5 MHz to 108 MHz in standby mode With ECO mode off: 12.0 W and cords. Dimensions (W × H × D) 176.6 × 256 × 348.7 mm FM usable sensitivity (IHF) 13.2 dBf The CD player works poorly
Resumen del contenido incluido en la página 16
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferen
