Resumen del contenido incluido en la página 1
OPERATING INSTRUCTIONS En (English)
DVD Stereo
System
MANUAL DE INSTRUCCIONES
E (Español)
XR-DV700
MODE D'EMPLOI F (Français)
U
For assistance and information
(United States and Puerto Rico)
8B-CQA-903-01
010420ACK-U-M
Resumen del contenido incluido en la página 2
PRECAUTION Warning Slots and openings in the cabinet and the back or bottom are Read these Operating Instructions carefully and completely To prevent electric shock or injury, these safety instructions provided for ventilation, and to ensure reliable operation of before operating the unit. All precautions on this booklet should be followed in the installation, use and servicing the the unit and to protect it from overheating, these openings and on the unit should be strictly followed. unit. must
Resumen del contenido incluido en la página 3
Overloading — Do not allow anything to rest on the power Lightning TABLE OF CONTENTS cord. Do not overload wall outlets and extension cords as For added protection for this unit receiver during a lightning PRECAUTION ...................................... 2 this can result in fire or electric shock. Do not locate this unit storm, or when it is left unattended and unused for long periods where the cord will be abused by persons walking on it. of time, unplug it from the wall outlet and disconnect
Resumen del contenido incluido en la página 4
OWNER'S RECORD System and accessories Record the model number and serial number of your set XR-DV700 (found at the rear of your set) below. Refer to them when CX-LDV700 DVD stereo system contacting your Aiwa dealer. SX-L700 Five Surround speaker system (front speakers, surround speakers, center speaker) Model No. _____________________________ TS-LW700 Subwoofer Remote control En Serial No. _____________________________ Lithium battery (CR2025) FM antenna, AM antenna Connecting cord (DIN 8-pin
Resumen del contenido incluido en la página 5
PREPARATION To attach the front speaker to the pedestal Placing the main unit Placement Allow 15 cm (6 in.) clearance from the top of the unit for Place the speakers in their proper position. All speakers for a movement of the disc compartment lid. full 5.1-channel home theater come supplied with your DVD Attaching the anti-skid patches system. To prevent the surround and center speakers from slipping, attach the supplied anti-skid patches to the bottom of the speakers. Use 3 patches for each of
Resumen del contenido incluido en la página 6
Connection Plug in the AC power cord to the AC power outlet after all other connections are made. Center speaker Surround speaker TV set En Surround speaker Subwoofer Front Front speaker speaker 6
Resumen del contenido incluido en la página 7
1 Connect the bare ends of each speaker cord to •Do not connect other equipment to the TO TS-LW700U The automatic demonstration will run on the display while jack because this is used exclusively for the supplied the power is turned off. the corresponding speaker. Be sure to use the correct cord for each speaker. subwoofer. To deactivate the automatic demonstration, press DEMO/ ECO. The clock will flash on the display. For setting the - Front speaker cords have bare leads at both ends 6 Connect
Resumen del contenido incluido en la página 8
PARTS AND CONTROLS Main unit: front 2 TUNER/BAND 8 VOLUME/MULTI JOG Selects radio function and the radio band. Adjusts the volume. Changes the menu item selection in the MODE setting. AUX Selects AUX function. MODE Adjusts various mode and sound settings. Press En DVD/CD repeatedly to select among T-BASS, BASS, TREBLE, Selects DVD/CD function. SLEEP and TIMER. ENTER 3zOPEN/CLOSE Enters the item selected with MULTI JOG. Opens and closes the disc compartment. 4 PHONES jack Plug in here an optional
Resumen del contenido incluido en la página 9
Main unit: rear Subwoofer 2 AM LOOP, FM 75 Ω terminals Plug in the supplied AM and FM antennas here. 3 TO TS-LW700U jack Connect the supplied powered subwoofer here. En 4 AC power cord 5 LINE OUT jacks Outputs analog sound signals to external equipment. 6 AUX jacks Accepts analog sound signals from external equipment. 1 VIDEO OUT jack Outputs standard (composite) video signals. 7 FRONT 3 terminals S-VIDEO OUT (S1) jack Connect the supplied front speakers here. Outputs S-VIDEO signals. 8 CENTER 3
Resumen del contenido incluido en la página 10
Remote control vVBb SUB TITLE ON/OFF Changes the menu item selection. Switches the subtitle on and off (DVDs only). ENTER T-SEARCH Enter the selected item. Enters the time search mode to locate a point in the disc by specifying the title number, chapter number or the En MENU playback time (DVDs only). Displays the menu for DVDs. MARK SETUP Enters the Mark mode to mark a point in the disc or to During stop: enters the setup menu. start playback from a marked point (DVDs only). During playback: ch
Resumen del contenido incluido en la página 11
Display window CENTER(+, -) 7 T-BASS level indicators Adjusts the sound level of the center speaker for Dolby Displays the T-BASS level. and DTS surround. 8 Disc type indicators REAR(+, -) Indicates the type of current disc (CD or VCD). Adjusts the sound level of the surround speakers for En Dolby and DTS surround. 9 Track/preset number indicator Displays the track number of CD or VCD and preset MAN/SEL (Manual/Select) number of radio. The current track/preset number flashes. Enters speaker leve
Resumen del contenido incluido en la página 12
ADJUSTMENTS BEFORE OPERATION When power economizing mode is activated When the unit turns off, "ECO MODE" is displayed for 4 seconds, and everything on the display clears. Only the red indicator on the POWER button lights to show that power is being supplied to the unit. Standby power consumption When power economizing mode is activated: 0.7 W En When power economizing mode is deactivated: 9 W Power DEMO Press POWER 6STANDBY/ON (POWER on the If the clock has not been set, "DEMO" appears on the d
Resumen del contenido incluido en la página 13
Select color mode Changing the display color Setting the clock The display color can be selected from among the preset colors 1 Press COLOR to display "SEL-COLOR" while the 1 Press SHIFT+CLOCK on the remote control. (Select color mode). 12 type of colors has already preset and power is on. When the unit is turned off, you can also press a or 5 type of colors can be adjusted to your taste. In addition, the ENTER. 2 Within 4 seconds, turn VOLUME/MULTI JOG to display color can be selected for each
Resumen del contenido incluido en la página 14
PLAYING DISCS—PREPARATORY INFORMATION Read the following information before playing discs. Software dependent features of DVDs Types of VCDs Video CDs equipped with PBC (Version 2.0) and VCDs Supported disc formats PBC (PlayBack Control) allows you to select and play back Since playback operations of DVDs and video CDs may be This unit plays discs with the following logos. tracks via menu operations. High-resolution stills can also intentionally fixed by software manufacturers, some playback be
Resumen del contenido incluido en la página 15
PLAYING DISCS—BASIC PLAYBACK • Do not open or close the disc compartment forcibly by hand. If "LID ERR" is displayed, unplug the AC power cord and contact your AIWA dealer. •Do not place more than one disc. •Do not tilt the unit with a disc loaded. •Do not touch the pickup lens. If it is soiled, discs may not be played normally. En To remove the disc Press zOPEN/CLOSE in stop mode to open the disc compartment. Then pull out the disc while pressing the center pivot. To play DTS audio CDs Hold dow
Resumen del contenido incluido en la página 16
Playing back with the software Stopping and pausing Disabling PBC (VCD only) To stop playback Press SHIFT+PBC on the remote control. specific menu (DVDs and VCDs only) Press s. "PBC" disappears from the display, and the menu playback This unit supports the menu interface of DVDs, and VCDs with Playback stops. The unit remembers the point at which feature is disabled. PBC. The menu screen may be displayed automatically when playback stopped. •With PBC disabled, VCDs are played just like audio CDs
Resumen del contenido incluido en la página 17
PLAYING DISCS—SELECTING TRACKS/CHAPTERS Skipping Press f or g repeatedly during playback. - With each press of g, the disc position skips to the beginning of the succeeding tracks (CDs/VCDs) or chapters (DVDs). - With each press of f, the disc position skips back first to the beginning of the current track, then to the previous En tracks (CDs/VCDs) or chapters (DVDs). •Skipping may be disabled on some DVDs. Basic operations to locate a desired point are described here. Fast forward/reverse playb
Resumen del contenido incluido en la página 18
PLAYING DISCS—OTHER PLAYBACK MODES Repeat playback DVDs Press SHIFT+REPEAT repeatedly on the remote control during playback. With each press, the repeat playback mode changes as follows: - CHAPTER: repeats the current chapter. - TITLE: repeats the current title. En - OFF: cancels repeat mode (normal playback) "[" appears on the unit's display when the unit is in the title repeat mode and "[ 1" appears in the chapter repeat mode. CD and VCDs 1 Press SHIFT+REPEAT repeatedly on the remote control.
Resumen del contenido incluido en la página 19
To clear the program Programmed playback (CDs and VCDs Changing audio channels (VCDs) Press s again during stop. Use this function when playing Karaoke VCDs or VCDs with only) •The program is also cleared when the disc tray is opened, different sound tracks in the left and right channels. Up to 30 tracks can be played back in the order of selection. the function is switched or the power is turned off. Press SHIFT+AUDIO SELECT repeatedly during 1 Press SHIFT+RANDOM/PRGM on the remote To check the
Resumen del contenido incluido en la página 20
PLAYING DISCS—DVD FEATURES To recall a marked point Chapter search 1 Press SHIFT+MARK to enter the mark mode. Specify the playback location of a DVD by the chapter number. 2 Press Bb to move the cursor or press a number button for the memory (1 - 5) to select the desired mark memory. 1 Press SHIFT+T-SEARCH twice. 3 Press ENTER or c. 2 Press the numbered button(s) for the desired Playback starts from the recalled point. chapter number, or press vV to change the To clear a marked point displayed c
