Manual de instrucciones de Xantech ML85

Resumen del contenido incluido en la página 1

DESCRIPTION

The Micro Link IR Receiver is a small peep-hole style infrared repeater

assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and

a 3.5mm stereo mini plug, which is plugged directly into the “IR RCVR”

jack on the connecting block, such as the models 789-44, CB60, and 791-

44. The Micro Link IR Receiver is primarily intended for use in installations
where the connecting block is within reach of its 7-foot cable – as when
installing the Micro Link IR

Resumen del contenido incluido en la página 2

EMITTERS 789-44 CONNECTING BLOCK ® IR 12VDC RCVR INSTALLATION QUICK-START A typical system will use an IR receiver, several emitters, and a power supply all connected to a connecting block. (sold separately) 1. Connect the IR receiver to the “IR RCVR” port on the connecting block. The ‘red’ connector is installed to the ‘red’ plug. 3.5mm mini plug Signal Name Note: In some extended distances, additional 3-conductor may be required and can TIP SIGNAL be connected to the term

Resumen del contenido incluido en la página 3

EMITTERS 791- 44 AMPLIFIE D CONNECTING BLOCK ® HIGH IR IR OUT RCVR 12VDC LARGE SYSTEM APPLICATION TROUBLE SHOOTING: The ML85 IR receiver is compatible with all Xantech Connecting Blocks. 1. Perhaps the most common problem you may encounter is stray IR Different connecting blocks are provided for application specific situations. (infrared) or RF (radio frequency) interference preventing proper For instance, in the diagram below, a 791-44 connecting block is used to operation of the cont

Resumen del contenido incluido en la página 4

Limited Warranty Xantech® warrants its products to be free of defects in materials or workmanship. This is a Limited Lifetime warranty from the date of purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the warranty period will be repaired or replaced, at Xantech’s option, at no charge. Xantech will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damage