Resumen del contenido incluido en la página 1
AUDIO/VIDEO
MULTI-CHANNEL RECEIVER
VSX-D909S
Operating Instructions
Resumen del contenido incluido en la página 2
Thank you for buying this Pioneer product. WARNING: TO PREVENT FIRE OR SHOCK Please read through these operating instructions so HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN you will know how to operate your model properly. OR MOISTURE. After you have finished reading the instructions, put them away in a safe place for future reference. THE STANDBY/ON BUTTON IS [For U.S. model] SECONDARY CONNECTED AND THEREFORE DOES NOT SEPARATE THE IMPORTANT NOTICE UNIT FROM MAINS POWER IN STANDBY The serial nu
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS — All the safety GROUNDING OR POLARIZATION OBJECT AND LIQUID ENTRY — Never and operating instructions should be Ö If this product is equipped with a push objects of any kind into this product read before the product is operated. polarized alternating current line plug (a through openings as they may touch RETAIN INSTRUCTIONS — The safety and plug having one blade wider than the dangerous voltage points or short-out operating instructions should be
Resumen del contenido incluido en la página 4
Quick Start Guide This is a quick guide to setting up your new receiver so you can get home theater surround sound. For more details on any of the information presented here check the main section of the manual. Before making or changing the connections, switch off the power and disconnect the power cord from the AC wall outlet. 11111 Hooking Up Your DVD Player & TV In order to use Dolby Digital/DTS soundtracks which are at the heart of home theater you need to hook up your DVD player with digit
Resumen del contenido incluido en la página 5
Quick Start Guide 22 222 Speaker Connections Home theater is designed to be setup with five, or seven speakers (front left & right; center; surround left & right; and, optimally, surround back left & right) and a subwoofer but you can use this receiver with fewer speakers. Hook up the speakers you have to the A speaker terminals on the back of the receiver. If you only have two speakers hook them up as "FRONT." If you have three hook up the single speaker as "CENTER." Follow the diagram on p.19
Resumen del contenido incluido en la página 6
Quick Start Guide 44 444 Digital Input Assignment This is only necessary if you did not hook up your DVD to DIGITAL IN 1, as in the first diagram on p. IV 1 Set the remote control slide switch to SETUP. ë
USE SETUP 1 S0URCE RECEIVER Also make sure your TV is on and set to the receiver. MULTI SYSTEM OPERATION OFF • When you're done setting up the receiver, remember to set DVD/LD TV/SAT VCR1 VCR2 MULTI CONTROL MD/ the slide switch back to USE. CD TUNER TVCONT TAPE1 CLASS MPX BAND DIRECT ACCESS ¦
Resumen del contenido incluido en la página 7
Quick Start Guide 55 555 Playing a DVD with Surround Sound 1 Turn on the receiver, your TV, and the DVD ë
USE SETUP S0URCE 2 player. MULTI SYSTEM OPERATION OFF 1 DVD/LD TV/SAT VCR1 VCR2 2 MULTI CONTROL MD/ CD TUNER TVCONT TAPE1 2 Set the remote control slide switch to USE. CLASS MPX BAND DIRECT ACCESS ¦
73 8 Press the DVD/LD button on the remote control. - TUNING + - STATION + 1Á
4 ¢ DTV ON/OFF DTV MENU - CHANNEL + You should see "DVD/LD" in the display on the receiver. 12 3 45 6 3 Press th
Resumen del contenido incluido en la página 8
Features Multi Channel Stereophonic Concept The VSX-D909S receiver is constructed with Pioneer’s industry-leading multi channel stereophonic concept. This well- developed approach to receiver circuitry takes the high level base technology that, up until now, has been only used for stereo equipment and applies it to multi-channel audio-visual receivers. The result is that the product, in addition to being expertly built, and gives you optimal sound reproduction of DVDs, other multi channel sourc
Resumen del contenido incluido en la página 9
SET OPERATION PREPARATION PREPARATION UP Table of Contents Before You Start ................................. 10 Remote Control of Other Components .. 58 Checking the Supplied Accessories ........................ 10 Setting Up the Remote Control to Control Other How to Use This Manual .......................................... 10 Components .............................................................. 58 Preparing the Remote Control ................................. 10 Using the Remote Control
Resumen del contenido incluido en la página 10
Before You Start Checking the Supplied Accessories Please check that you have received all of the following supplied accessories. FM wire Antenna AM loop Antenna Remote Control Unit “AA” IEC LR6 batteries x 2 • Operating Instructions How to Use This Manual OPERATION This manual is for the VSX-D909S Audio/Video Multi- To play some music or soundtrack refer to “Basic Channel Receiver. Playback“ on p.41. “Using the Tuner“ (p.54) explains This manual is divided into three main sections which how to
Resumen del contenido incluido en la página 11
PREPARATION Before You Start Operating range of remote control unit The area in which you can use the remote control to operate the VSX-D909S is fairly large. To use, point the remote control toward the remote sensor on the front panel of this unit while within the range shown right. Remote control may not function properly if: • There are obstacles between the remote control and the remote sensor. 30° • Direct sunlight or fluorescent light is shining onto the 30° remote sensor. • The receiver l
Resumen del contenido incluido en la página 12
L R Connecting Your Equipment Audio Components To begin set up connect your audio components to the jacks as shown below. These are all analog connections and your analog audio components (turntable, cassette deck) use these jacks. Remember that for components you want to record with you need to hook up four plugs (a set of stereo ins and a set of stereo outs), but for components that only play (like a turntable) you only need to hook up one set of stereo plugs (two plugs). To use DTS or Dolby D
Resumen del contenido incluido en la página 13
PREPARATION Connecting Your Equipment Digital Connections In order to use Dolby Digital/DTS soundtracks which are at the heart of home theater you need to make digital audio connections. You can do this by either a coaxial or an optical connection (you don’t need to do both). The quality of these two types of connections is the same but since some digital components only have one type of digital terminal, it is a matter of matching like with like (for example, the coaxial out from the component
Resumen del contenido incluido en la página 14
Connecting Your Equipment Example Connection for a DVD/LD or LD player To connect a DVD/LD player or LD player with it's 2 RF output, a commercially available RF demodulator (RFD-1) is required. The RF demodulator changes the RF signal to a digital signal which is then processed by the VSX-D909S model through their digital input jacks. For more details, refer to the instruction manual supplied with the RFD-1. We also recommend hooking up your digital components to analog audio jacks. Before maki
Resumen del contenido incluido en la página 15
PREPARATION Connecting Your Equipment Video Components Connect your video components to the jacks as shown below. Regarding a DVD there are two types of connections to make. Hook up your video signal with either component video, S-video, or composite video cords (the quality descends in this order) but remember, the video component you are watching and your TV must be hooked up with same type of video cord or you won't be able to see the picture. For the audio signal, order to use Dolby Digital/
Resumen del contenido incluido en la página 16
L VIDEO R Connecting Your Equipment Satellite TV Components Connect your satellite TV components to the jacks as shown below. Hook up the video signal with either component video, S-video, or composite video cords (the quality descends in this order) but remember, the video component you are watching and your TV must be hooked up with same type of video cord or you won't be able to see the picture. For the audio signal, order to use digital soundtracks (sometimes broadcast over digital satellite
Resumen del contenido incluido en la página 17
PREPARATION Connecting Your Equipment TV Connect your TV to the jacks as shown below. Hook up the signal with either component video, S-video, or composite video cords (the quality descends in this order) but remember, the video component you are watching and your TV must be hooked up with same type of video cord or you won't be able to see the picture. Before making or changing the connections, switch off the power and disconnect the power cord from the AC wall outlet. AUDIO VIDEO COMPONENT VID
Resumen del contenido incluido en la página 18
Connecting Your Equipment Connecting the Radio Antennas Connect the supplied FM wire antenna and the AM loop antenna to the antenna terminals as shown below. These antennas should provide adequate reception quality in most cases, but connecting outdoor antennas should noticeably improve sound quality. Before making or changing the connections, switch off the power and disconnect the power cord from the AC wall outlet. AUDIO VIDEO COMPONENT VIDEO VIDEO S VIDEO DVD/LD TV/SAT R L PCM/ IN IN DVD / 2
Resumen del contenido incluido en la página 19
PREPARATION Connecting Your Equipment Speakers A full complement of eight speakers is shown here but, naturally, everyone's home set up will vary. Simply connect the speakers you have in the manner described below. The receiver will work with just two stereo speakers (called "front" speakers in the diagram) but the receiver is designed to be used with at least three speakers. One of the latest features of home theater is the use of SURROUND BACK speakers. These speakers add even greater realism
Resumen del contenido incluido en la página 20
Connecting Your Equipment Speaker impedance You can change the speaker impedance but we recommend using speakers with an impedance of 8Ω-16Ω (the default setting). If you are using 6Ω- less than 8Ω impedance speakers, you need to change the impedance setting. STANDBY/ON First turn the receiver off, then press the STANDBY/ON button while holding down the SPEAKERS button. AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-D909S Digital Signal Processor Choose the impedance setting by pressing the SPEAKERS but
