Resumen del contenido incluido en la página 1
AUDIO/VIDEO
MULTI-CHANNEL RECEIVER
VSX-39TX
Operating Instructions
Resumen del contenido incluido en la página 2
Thank you for buying this Pioneer product. WARNING: TO PREVENT FIRE OR SHOCK Please read through these operating instructions so HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN you will know how to operate your model properly. OR MOISTURE. After you have finished reading the instructions, put them away in a safe place for future reference. THE STANDBY/ON BUTTON IS [For U.S. model] SECONDARY CONNECTED AND THEREFORE DOES NOT SEPARATE THE IMPORTANT NOTICE UNIT FROM MAINS POWER IN STANDBY The serial nu
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS — All the safety GROUNDING OR POLARIZATION OBJECT AND LIQUID ENTRY — Never and operating instructions should be Ö If this product is equipped with a push objects of any kind into this product read before the product is operated. polarized alternating current line plug (a through openings as they may touch RETAIN INSTRUCTIONS — The safety and plug having one blade wider than the dangerous voltage points or short-out operating instructions should be
Resumen del contenido incluido en la página 4
Quick Start Guide This is a quick guide to setting up your new receiver so you can get home theater surround sound. For more details on any of the information presented here check the main section of the manual. Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. 11111 Hooking Up Your DVD Player & TV In order to use Dolby Digital/DTS soundtracks which are at the heart of home theater you need to hook up your DVD player with digital au
Resumen del contenido incluido en la página 5
Quick Start Guide 22 222 Speaker Connections Home theater is designed to be setup with five, or seven speakers (front left & right; center; surround left & right; and, optimally, surround back left & right) and a subwoofer but you can use this receiver with fewer speakers. Hook up the speakers you have to the A speaker terminals on the back of the receiver. If you only have two speakers hook them up as "FRONT." If you have three hook up the single speaker as "CENTER." Follow the diagram on p. 19
Resumen del contenido incluido en la página 6
Quick Start Guide 44 444 Digital Input Assignment This is only necessary if you did not hook up your DVD to DIGITAL IN 1, as in the first diagram on p. IV. 12 1 Turn on the receiver and your TV, press the RECEIVER on the remote Receiver MAIN SUB RECEIVER REMOTE control. SETUP TAPE 2 FL MONITOR DIMMER DVD/LD MD/TAPE1 BASS TREBLE 2 Press the SUB button on the TV/SAT CD INPUT SPEAKER ATT. A/B remote control. VCR1 TUNER CH TONE SELECT TV CH VCR2 SYSTEM CONTROL LEVEL SETUP 3 Press the SYSTEM SETUP bu
Resumen del contenido incluido en la página 7
Quick Start Guide 55 555 Playing a DVD with Surround Sound 1 Turn on the receiver, your TV, and the DVD player. 2 Press the STANDARD button on the front panel for the basic surround sound setting. You can also press the remote control RECEIVER button and then press the STANDARD button on that screen. 3 Press the DVD/LD button on the remote control. You should see "DVD/LD" in the display on the receiver. 4 Play a DVD. 66 666 For Better Surround Sound 1 Go through the entire "system setup" proce
Resumen del contenido incluido en la página 8
Features Multi Channel Stereophonic Concept The VSX-39TX receiver is constructed with Pioneer’s industry-leading multi channel stereophonic concept. This well-developed approach to receiver circuitry takes the high level base technology that, up until now, has been only used for stereo equipment and applies it to multi-channel audio-visual receivers. The result is that the product, in addition to being expertly built, and gives you optimal sound reproduction of DVDs, other multi channel sources
Resumen del contenido incluido en la página 9
SET OPERATION PREP PREPARA ARATION TION UP Table of Contents Reducing Noise During Playback Before You Start ................................. 10 (DIGITAL NR Function) ..................................... 50 Checking the Supplied Accessories ........................ 10 Listening in MIDNIGHT Mode.............................. 50 How to Use This Manual .......................................... 10 Listening in LOUDNESS Mode ............................ 51 Preparing the Remote C
Resumen del contenido incluido en la página 10
Before You Start Checking the Supplied Accessories Please check that you have received all of the following supplied accessories. FM wire Antenna Touch Pen Cushion for “AA” IEC LR6 (attached to the back Remote x 4 batteries x 4 of the remote control) Remote Control Unit AM Loop Antenna Operating Instructions How to Use This Manual how to use the radio of this unit. Doing the operations This manual is for the VSX-39TX Audio/Video Multi- in “Remote Control of Other Components“ (p.58) is Channel Re
Resumen del contenido incluido en la página 11
PREP PREPARA ARATION TION Before You Start Remote Control Battery Alarm Change Battery !! OK ? When the batteries get too weak to operate the remote control properly an alarm will sound and a warning screen will appear on the remote. Change the batteries as SIZE AA, LR6 SIZE AA, LR6 shown on the previous page. The Touch Pen & Lock The touch pen is located in the back right-hand corner of the lock switch remote control. Take it out by sliding your finger along the bottom Touch pen right edge of t
Resumen del contenido incluido en la página 12
L R Connecting Your Equipment Audio Components To begin set up connect your audio components to the jacks as shown below. These are all analog connections and your analog audio components (turntable, cassette deck) use these jacks. Remember that for components you want to record with you need to hook up four plugs (a set of stereo ins and a set of stereo outs), but for components that only play (like a turntable) you only need to hook up one set of stereo plugs (two plugs). To use DTS or Dolby D
Resumen del contenido incluido en la página 13
PREPARATION Connecting Your Equipment Digital Connections In order to use Dolby Digital/DTS soundtracks which are at the heart of home theater you need to make digital audio connections. You can do this by either a coaxial or an optical connection (you don’t need to do both). The quality of these two types of connections is the same but since some digital components only have one type of digital terminal, it is a matter of matching like with like (for example, the coaxial out from the component
Resumen del contenido incluido en la página 14
Connecting Your Equipment Example Connection for a DVD/LD or LD player Make sure you connect your DVD/LD or LD players using both the 2 RF jack and either a coaxial or optical (you don't need to do both of these) digital connections. If your player has an 2 RF output this will ensure you can use all LDs (see p. 15). We also recommend hooking up your digital components to analog audio jacks. Before making or changing the connections, switch off the power and disconnect the power cord from the AC
Resumen del contenido incluido en la página 15
PREPARATION Connecting Your Equipment Video Components Connect your video components to the jacks as shown below. Regarding a DVD there are two types of connections to make. Hook up your video signal with either component video, S-video, or composite video cords (the quality descends in this order) but remember, the video component you are watching and your TV must be hooked up with same type of video cord or you won't be able to see the picture. For the audio signal, order to use Dolby Digital/
Resumen del contenido incluido en la página 16
L VIDEO R Connecting Your Equipment Satellite TV Components Connect your satellite TV components to the jacks as shown below. Hook up the video signal with either component video, S-video, or composite video cords (the quality descends in this order) but remember, the video component you are watching and your TV must be hooked up with same type of video cord or you won't be able to see the picture. For the audio signal, order to use digital soundtracks (sometimes broadcast over digital satellite
Resumen del contenido incluido en la página 17
PREPARATION Connecting Your Equipment TV Connect your TV to the jacks as shown below. Hook up the signal with either component video, S-video, or composite video cords (the quality descends in this order) but remember, the video component you are watching and your TV must be hooked up with same type of video cord or you won't be able to see the picture. Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. AUDIO VIDEO COMPONENT VIDEO VI
Resumen del contenido incluido en la página 18
Connecting Your Equipment Connecting the Radio Antennas Connect the supplied FM wire antenna and the AM loop antenna to the antenna terminals as shown below. These antennas should provide adequate reception quality in most cases, but connecting outdoor antennas should noticeably improve sound quality. Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. AUDIO VIDEO COMPONENT VIDEO VIDEO S2 VIDEO R DVD/LD TV/SAT L PCM/ DVD / IN IN 2/ LD
Resumen del contenido incluido en la página 19
PREPARATION Connecting Your Equipment Speakers A full complement of eight speakers is shown here but, naturally, everyone's home set up will vary. Simply connect the speakers you have in the manner described below. The VSX-39TX will work with just two stereo speakers (called "front" speakers in the diagram) but the receiver is designed to be used with at least three speakers. One of the latest features of home theater is the use of SURROUND BACK speakers. These speakers add even great realism in
Resumen del contenido incluido en la página 20
Connecting Your Equipment 7 Speaker terminals The speaker terminals also accept single banana 1 Twist exposed wire 2 Loosen speaker terminal 3 Tighten plugs. and insert exposed wire. terminal. strands together. (Refer to speaker manual for details.) 3/8 in. (10 mm) Placing Your Speakers Proper speaker placement is essential to realize the best sound from your system. The diagram and tips given here are just a rough guide. Be sure to read the instructions that come with your speakers. Speaker pla
