Resumen del contenido incluido en la página 1
Contents
Introduction ..................................... 2
AV Receiver
Connection .................................... 15
TX-SR503
Turning On & First Time Setup..... 30
TX-SR503E
TX-SR8350
Basic Operation
Playing your AV components....... 34
Instruction Manual
Using the Tuner............................ 36
Enjoying the Listening Modes ..... 42
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the i
Resumen del contenido incluido en la página 2
WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a risk of electr
Resumen del contenido incluido en la página 3
Precautions 1. Recording Copyright—Unless it’s for personal use Memory Backup only, recording copyrighted material is illegal with- The AV receiver uses a battery-less memory backup out the permission of the copyright holder. system in order to retain radio presets and other settings 2. AC Fuse—The AC fuse inside the unit is not user- when it’s unplugged or in the case of a power failure. serviceable. If you cannot turn on the unit, contact Although no batteries are required, the AV receive
Resumen del contenido incluido en la página 4
Supplied Accessories Precautions—Continued Make sure you have the following accessories: For U.S. models FCC Information for User CAUTION: The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Remote controller & two batteries (AA/R6) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are des
Resumen del contenido incluido en la página 5
Features Table of Contents Amp Introduction • 7-channel amplifier Important Safety Instructions.................2 • 75 watts per channel min. RMS at 8 Ω , 2 channels Precautions..............................................3 driven from 20 Hz to 20 kHz with no more than 0.08% Supplied Accessories .............................4 total harmonic distortion Features....................................................5 • WRAT (Wide Range Amplifier Technology) Front & Rear Panels ......................
Resumen del contenido incluido en la página 6
Front & Rear Panels Front Panel North American Model 1 2 3 4 5678 9JK L M TUNING / PRESET MASTER VOLUME STANDBY/ON ENTER STANDBY RETURN SETUP A SPEAKERS B TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE CLEAR VIDEO 3 INPUT PHONES VIDEO LR AUDIO MULTl CH DVD VIDEO 1 VIDEO 2 VIDEO 3 TAPE TUNER CD VCR N O P Q R S T Other Models (European model only) U 9 TUNING / PRESET MASTER VOLUME STANDBY/ON ENTER STANDBY RETURN SETUP A SPEAKERS B TONE + STEREO LISTENING MODE
Resumen del contenido incluido en la página 7
Front & Rear Panels—Continued J MEMORY button (37) P TONE, [–] & [+] buttons (40) This button is used when storing or deleting radio These buttons are used to adjust the bass and treble. presets. Q Input selector buttons (34) K TUNING MODE button (36) These buttons are used to select from the following This button is used to select the Auto or Manual tun- input sources: MULTI CH, DVD, VIDEO 1, ing mode. VIDEO 2, VIDEO 3, TAPE, TUNER, or CD. L Arrow/TUNING/PRESET & ENTER buttons The [MULTI CH]
Resumen del contenido incluido en la página 8
Front & Rear Panels—Continued Rear Panel 1 B 3 4 5 6 7 8 9 J K L M N O A DIGITAL IN OPTICAL 1, 2, 3 & COAXIAL I CD IN These optical and coaxial jacks can be used to con- These analog inputs can be used to connect a CD nect a CD or DVD player and other components player with analog outputs. with digital audio outputs. J TAPE IN/OUT B COMPONENT VIDEO These analog inputs and outputs can be used to con- A DVD player, TV, or other component that sup- nect a cassette recorder, MiniDisc recorder, or o
Resumen del contenido incluido en la página 9
Before Using the AV receiver Notes: Setting the Voltage Selector • The batteries should last for about six months, (on some models) although this will vary with usage. Some models have a voltage selector switch for compat- • If the remote controller doesn’t work reliably, try ibility with power systems around the world. Before you replacing the batteries. plug in this model, make sure that the voltage selector is • Don’t mix new and old batteries or different types of set to the correct volt
Resumen del contenido incluido en la página 10
Remote Controller How to Use the Remote Controller RECEIVER Mode Including the AV receiver, the remote controller can be RECEIVER mode is used to control the AV receiver. used to control up to seven different components. The To set the remote controller to RECEIVER mode, remote controller has a specific operating mode for use press the [RECEIVER] REMOTE MODE button. with each type of component. Modes are selected by using the six REMOTE MODE buttons. A RECEIVER ■ RECEIVER/TAPE Mode ON STANDB
Resumen del contenido incluido en la página 11
Remote Controller—Continued For detailed information, see the pages in parentheses. O VOL [ ]/[ ] button (34) This button can be used to adjust the volume of the AV receiver regardless of the currently selected A STANDBY button (30) remote controller mode. This button is used to set the AV receiver to Standby. P MUTING button (40) This button is used to mute the AV receiver. B ON button (30) This button is used to turn on the AV receiver. Q SETUP button C INPUT SELECTOR buttons (34) This butt
Resumen del contenido incluido en la página 12
Remote Controller—Continued A STANDBY button DVD Mode This button sets the DVD player to Standby. To set the remote controller to DVD mode, press the B ON button [DVD] REMOTE MODE button. This button is used to turn on the DVD player. C Number buttons Before selecting DVD mode and starting play- These buttons are used to enter title, chapter, and back, you should press the [RECEIVER] mode track numbers and to enter times for locating spe- button followed by the [DVD] INPUT SELEC- TOR button t
Resumen del contenido incluido en la página 13
Remote Controller—Continued A STANDBY button CD/MD/CDR Mode This button sets the CD player or MD/CD recorder By default, the AV receiver is configured to control an to Standby. Onkyo CD player. B ON button This button is used to set the CD player or MD/CD To set the remote controller to CD/MD/CDR mode, recorder to On or Standby. press the [CD] REMOTE MODE button. C Number buttons These buttons are used to enter track numbers and Before selecting CD/MD/CDR mode and start- to enter times for l
Resumen del contenido incluido en la página 14
Remote Controller—Continued TAPE Mode TV Control Buttons TAPE mode is used to control an Onkyo cassette The remote controller has dedicated buttons for control- recorder connected to the AV receiver via . ling a TV, which can be used regardless of which remote controller mode is currently selected. To use these but- To set the remote controller to TAPE mode, press the tons, you must first program the [TV] mode button with [RECEIVER] REMOTE MODE button. the remote control code appropriate for t
Resumen del contenido incluido en la página 15
Connecting Your Speakers Enjoying Home Theater You can use two sets of speakers with the AV receiver: speaker set A and speaker set B. Speaker set A should be installed in your main listening room and can be used with Dolby Digital and DTS surround material. Each speaker must be positioned at a specific location in your listening room to get the best from surround sound material. The following illustration shows the best positions for your surround-sound speakers. When speaker set B is turned
Resumen del contenido incluido en la página 16
Connecting Your Speakers—Continued Speaker Configuration Speaker Connection Precautions For the best surround-sound experience, you should con- Read the following before connecting your speakers: nect seven speakers and a powered subwoofer. • American model only: You can connect speakers The following table shows which channels you should with an impedance of 6 ohms or higher. If you use use based on the number of speakers that you have. speakers with a lower impedance, and use the ampli- fier
Resumen del contenido incluido en la página 17
Connecting Your Speakers—Continued Connecting Speaker Set A Connecting Speaker Set B Strip 5/8" (15 mm) of insu- Strip 3/8" (10 mm) of insu- 5/8" (15 mm) 3/8" (10 mm) 1 1 lation from the ends of the lation from the ends of the speaker cables, and twist speaker cables, and twist the bare wires tightly, as the bare wires tightly, as shown. shown. Unscrew the terminal. Fully insert the bare wires. While pressing the lever, insert 2 2 Make sure that the bare wire is touching the inside the wire
Resumen del contenido incluido en la página 18
Connecting Antenna This section explains how to connect the supplied indoor Connecting the AM Loop Antenna FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The supplied indoor AM loop antenna is for indoor use only. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. Assemble the AM loop antenna, inserting 1 the tabs into the base, as shown. AM antenna push term
Resumen del contenido incluido en la página 19
Connecting Antenna—Continued Connecting an Outdoor FM Antenna Connecting an Outdoor AM Antenna If you cannot achieve good reception with the supplied If good reception cannot be achieved using the supplied indoor FM antenna, try a commercially available out- AM loop antenna, an outdoor AM antenna can be used in door FM antenna instead. addition to the loop antenna, as shown. Outdoor antenna Insulated antenna cable AM loop antenna Notes: • Outdoor FM antennas work best outside, but usable Outd
Resumen del contenido incluido en la página 20
Connecting Your Components AV Connection Color Coding About AV Connections RCA-type AV connections are usually color coded: red, • Before making any AV connections, read the manuals white, and yellow. Use red plugs to connect right-chan- supplied with your other AV components. nel audio inputs and outputs (typically labeled “R”). Use • Don’t connect the power cord until you’ve completed white plugs to connect left-channel audio inputs and out- and double-checked all AV connections. puts (typ
