Resumen del contenido incluido en la página 1
Contents
AV Receiver
Introduction ...................................2
Connections.................................11
HT-R690
Turning On & Basic Operations ......20
Advanced Operations .................39
Instruction Manual
Controlling Other Components...58
Appendix......................................64
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
yo
Resumen del contenido incluido en la página 2
Introduction WARNING AVIS WARNING: RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO The lightning flash with arrowhead symbol, within an RAIN OR MOISTURE. equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a r
Resumen del contenido incluido en la página 3
Precautions 1. Recording Copyright—Unless it’s for personal use For U.S. models only, recording copyrighted material is illegal without FCC Information for User the permission of the copyright holder. CAUTION: 2. AC Fuse—The AC fuse inside the unit is not user- The user changes or modifications not expressly approved serviceable. If you cannot turn on the unit, contact by the party responsible for compliance could void the your Onkyo dealer. user’s authority to operate the equipment. 3. Car
Resumen del contenido incluido en la página 4
Supplied Accessories Make sure you have the following accessories: Indoor FM antenna (➔ page 19) AM loop antenna (➔ page 19) Speaker setup microphone (➔ page 28) Remote controller (RC-801M) and two batteries (AA/R6) * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color. ■ Installing the batteries Note If the remote controller doesn’t work reliably, try replacing the batteries. Don’t
Resumen del contenido incluido en la página 5
Contents Introduction Advanced Operations Important Safety Instructions ......................................... 2 Advanced Setup .............................................................39 Precautions....................................................................... 3 On-screen Setup Menus...............................................39 Supplied Accessories...................................................... 4 Common Procedures in Setup Menu ...........................39 Features .
Resumen del contenido incluido en la página 6
Features *1 Qdeo and QuietVideo are trademarks of Marvell or its Amplifier affiliates. *2 130 Watts/Channel @ 6 ohms (FTC) “x.v.Color” is a trademark of Sony Corporation. *3 Optimum Gain Volume Circuitry H.C.P.S. (High Current Power Supply) Massive High Manufactured under license under U.S. Patent #’s: 5,451,942; Power Transformer 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; Jitter Cleaning Circuit Technology 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and w
Resumen del contenido incluido en la página 7
Front & Rear Panels Front Panel The page numbers in parentheses show where you can find the main explanation for each item. ON/STANDBY button (20) RETURN button ZONE 2, OFF buttons (57) MASTER VOLUME control (21) Remote control sensor (4) MUSIC OPTIMIZER button and indicator (37, 55) Display (8) PHONES jack (38) LISTENING MODE buttons (31) TONE and Tone Level buttons (54) DIMMER button (36) Input selector buttons (21) MEMORY button (27) AUX INPUT AUDIO/VIDEO jacks (16)
Resumen del contenido incluido en la página 8
Display For detailed information, see the pages in parentheses. Speaker/channel indicators Audyssey indicator (28, 45) Dynamic EQ indicator (45) Z2 (Zone 2) indicator (57) Dynamic Vol indicator (46) Listening mode and format indicators (31, 55) Headphone indicator (38) , and cursor indicators (22) Message area NET indicator (23, 53) MUTING indicator (37) Tuning indicators Volume level (21) AUTO indicator (26) TUNED indicator (26) USB indicator (22, 23) FM STEREO indicator
Resumen del contenido incluido en la página 9
Rear Panel DIGITAL IN COAXIAL and OPTICAL jacks REMOTE CONTROL jack COMPONENT VIDEO IN and OUT jacks Composite video and analog audio jacks (BD/DVD IN, VCR/DVR IN and OUT, CBL/SAT ETHERNET port IN, GAME IN, TV/CD IN) FM ANTENNA jack and AM ANTENNA terminal MONITOR OUT V jack PC IN jack ZONE 2 LINE OUT jacks HDMI IN and OUT jacks UNIVERSAL PORT jack SPEAKERS terminals SUBWOOFER PRE OUT jack (CENTER, FRONT, SURROUND, SURROUND BACK or FRONT HIGH, ZONE 2) See “Connecting the A
Resumen del contenido incluido en la página 10
Remote Controller Controlling the AV Receiver To control the AV receiver, press RECEIVER to select Receiver mode. You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components. See “Entering Remote Control Codes” for more details (➔ page 61). *1 For detailed information, see the pages in parentheses. *2 RECEIVER button (20) REMOTE MODE/INPUT SELECTOR buttons (21) Arrow / / / and ENTER buttons SETUP button (39) *2 Listening
Resumen del contenido incluido en la página 11
Connections Connecting the AV Receiver Connecting Your Speakers Connecting the Speaker Cables The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURROUND BACK or FRONT HIGH L terminals. Surround Center Surround left right Surround back/ Surround back/ Front right Front left Front high Front high right left Tip You can specify whether surround back or front high speakers are connected
Resumen del contenido incluido en la página 12
Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass. To get the best from your surround sound system, you need to set the speaker settings automatically (➔ page 28) or manually (➔ page 41). Number of channels 234 56 77 Front speakers ✔✔✔✔✔✔✔ Center speaker ✔✔✔✔✔ Surround speakers ✔✔✔✔✔ *1*2 ✔ Surround bac
Resumen del contenido incluido en la página 13
Using a Powered Subwoofer To find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various positions within the room, and choose the one that provides the most satisfying results. LINE INPUT LINE INPUT Tip If your subwoofer is unpowered and you’re using an external Powered subwoofer amplifier, connect the subwoofer pre out jack to an input on the amplifier. Corner position 1/3 of wall position En 13
Resumen del contenido incluido en la página 14
About AV Connections Connecting AV components HDMI cable : Video & Audio Other cables : Video : Audio AV receiver AV receiver Blu-ray Disc/ Blu-ray Disc/ DVD player TV, projector, etc. Game console TV, projector, etc. Game console DVD player Before making any AV connections, read the manuals supplied with your AV components. Don’t connect the power cord until you’ve completed and double-checked all AV connections. Right! Push plugs in all the way to make good connections (loose connections
Resumen del contenido incluido en la página 15
Connecting Components with HDMI VCR or DVD recorder/Digital Video Recorder Game console TV, projector, etc. Blu-ray Disc/DVD player Satellite/cable set-top box, etc. Connect your components to the appropriate jacks. The default input assignments are shown below. ✔: Assignment can be changed (➔ page 40). Jack Components Assignable Input HDMI IN 1 Blu-ray Disc/DVD player ✔ HDMI IN 2 VCR or DVD recorder/Digital Video Recorder ✔ HDMI IN 3 Satellite/cable set-top box, etc. ✔ HDMI IN 4 Game console ✔
Resumen del contenido incluido en la página 16
Connecting Your Components The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to other video outputs, use the AV receiver’s display when changing settings. Connect your components to the appropriate jacks. The default input assignments are shown below. See “Connection Tips and Video Signal Path” for more information (➔ page 76). ✔: Assignment can be changed (➔ page 41). No. Jack/Port Components Assignable AUX INPUT AUDIO L/R Camcorder, etc
Resumen del contenido incluido en la página 17
*4 When you connect your personal computer to PC IN and select the corresponding input selector, the video of the personal computer is output from the HDMI outputs. However, if you have assigned the HDMI inputs to the same input selector, the AV receiver will output signals received from the HDMI inputs instead of signals from PC IN. To have the signals output from PC IN, select “-----” for the corresponding input selector in the “HDMI Input” setting (➔ page 40). With connection , you can
Resumen del contenido incluido en la página 18
Connecting Onkyo Components Make sure that each Onkyo component is 1 connected with an analog audio cable (connection in the hookup examples) (➔ page 16). Make the connection (see the illustration). 2 If you’re using an RI Dock, or cassette tape deck, 3 change the Input Display (➔ page 37). With (Remote Interactive), you can use the following special functions: R L ■ System On/Auto Power On ANALOG e.g., CD player AUDIO OUT When you start playback on a component connected via while the
Resumen del contenido incluido en la página 19
Connecting the Antennas This section explains how to connect the supplied indoor FM antenna and AM loop antenna. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. Insert the plug fully into the jack. Push. Insert wire. Release. Assembling the AM loop antenna Caution Be careful not to injure yourself when using thumbtacks. Thumbtacks, etc. AM loop antenna (supplied) Indoor FM antenna (supplied) Note Once your AV
Resumen del contenido incluido en la página 20
Turning On & Basic Operations Turning On/Off the AV Receiver ON/STANDBY RECEIVER RECEIVER Turning On Press ON/STANDBY on the front panel. 1 or Press RECEIVER followed by RECEIVER on the remote controller. The AV receiver comes on, the display lights. Turning Off Press ON/STANDBY on the front panel. 1 or Press RECEIVER followed by RECEIVER on the remote controller. The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always turn down the
