Resumen del contenido incluido en la página 1
Contents
AV Receiver
Before using 2
DTR-8.2
Facilities and connections 8
Instruction Manual
Setup and operation 29
Thank you for purchasing the AV Receiver.
Please read this manual thoroughly before making
Remote controller 59
connections and plugging in the unit. Following the
instructions in this manual will enable you to obtain
optimum performance and listening enjoyment
from your new AV Receiver. Please retain this
manual for future reference.
Appendix 86
Resumen del contenido incluido en la página 2
WARNING: WARNING AVIS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE DO NOT OPEN NE PAS OUVRIR DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated CAUTION: “dangerous voltage” within the product’s enclosure that may be of TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT sufficient magnitude to constitute a risk of
Resumen del contenido incluido en la página 3
21. Replacement Parts – When replacement parts are required, be FIGURE 1: sure the service technician has used replacement parts specified EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL by the manufacturer or have the same characteristics as the ELECTRICAL CODE, ANSI/NFPA 70 original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. ANTENNA 22. Safety Check – Upon completion of any service or repairs to the LEAD IN WIRE appliance, ask the service technician to
Resumen del contenido incluido en la página 4
Contents Before using Setup and operation Important Safeguards......................................... 2 Setup menus ..................................................... 29 Navigating through the Setup menu .............................. 30 Precautions ......................................................... 3 Hardware Setup................................................. 31 Contents .............................................................. 4 0. Hardware Setup menu .....................
Resumen del contenido incluido en la página 5
Contents Enjoying music in the remote zone ................ 56 Getting the Maximum out of it ........................ 72 Playing music using the buttons on the DTR-8.2 .......... 56 1. Introduction .............................................................. 72 Selecting an input source using the remote controller .. 56 Working with Modes ...................................................... 72 Adjusting the volume for the remote zone .................... 56 2. Programming Buttons............
Resumen del contenido incluido en la página 6
Features 7 Assignable Digital Inputs (4 optical/3 Amplifier Features Coaxial), 2 outputs, and 1 Digital Input 110 Watts minimum of continuous RMS (optical) power to each of the seven channels into 8 Ω from 20 Hz to 20 kHz with no more than Pre Out Terminals for Front L/R, Center, 0.08 %THD (FTC rated) Surround L/R, Surround back L/R or Zone 2 L/R and Subwoofer 7 Channel Amplifier Wide Range Amplifier Technology (WRAT) FM/AM Tuner Features Linear Optimum Gain Volume Circuitry 40 FM/
Resumen del contenido incluido en la página 7
Before using this unit Insert batteries Using the remote controller Point the remote controller toward the remote control sensor. The 1. Slide the battery cover off the back of the remote STANDBY indicator lights up when the unit receives a signal from controller. the remote controller. 2. Insert 4 AA batteries (included in package) as Remote control sensor indicated on the bottom of the battery compartment. DTR-8.2 3. Slide the battery cover back on. STANDBY indicator 1 2 3 30˚ 30˚ Approx. 16 f
Resumen del contenido incluido en la página 8
Front panel facilities Here is an explanation of the controls and displays on the front panel of the DTR-8.2. Front panel Standby/On Master Volume Standby Power On O f f Direct/ () Zone 2 GRN Pure Audio () Rec RED Audio DVD Video 1 Video 2 Video 3 Video 4 Video 5 Tape FM AM Phono CD Pure Audio Upsampling Selector Display Push To Open Front door Video 5/Video Cam Input Phones Zone 2 Level Rec Out Zone 2 Off Stereo Surround THX DSP Dimmer FM Mode Memory Setup Tuning Enter Preset Return Clear Didit
Resumen del contenido incluido en la página 9
Front panel facilities For operational instructions, see page indicated in brackets [ ]. Phones jack [51] This is a standard stereo jack for connecting stereo headphones. Power switch [28] Turns on and off the main power supply for the DTR-8.2. Zone 2 Level / buttons [56] Press to enter the mode for adjusting the volume in the remote zone Standby/On button [28] (Zone 2). When this button is pressed with the main power switch turned on, the DTR-8.2 turns on and the display lights up. Press again
Resumen del contenido incluido en la página 10
Front panel facilities Tuning / buttons [49] Use these buttons to change the tuner frequency. The tuner frequency is displayed in the front display and it can be changed in 50 kHz increments for FM and 10 kHz increments for AM. When FM is selected, you can hold down one of the tuning buttons and then release it to activate the auto-search feature. It will search for a station in the direction of the button you pressed and stop when it tunes into one. When navigating through the menu settings, th
Resumen del contenido incluido en la página 11
Remote controller For details on how to use the remote controller, refer to “Using the remote controller” (page 59). – CONT Select AV Amp in the Home menu to display the operation buttons. + MUTE LIGHT MUTE button + Activates the mute function. [51] CH – AV Amp CH +/– button VOL When AV Amp is selected, for selecting a tuner preset channel. [50] VOL / buttons When AV Amp is selected, for adjusting the volume. When Zone 2 is selected, for adjusting the volume in the Zone 2. First operation menu (
Resumen del contenido incluido en la página 12
Remote controller Third operation menu (page 3/3) Setup button For displaying and quitting the setup menu. [30] (Page 3/3) Return button For entering the selected setting and returning to the previous menu. [30] Test button Outputs a test tone for setting speaker levels. Use this button in conjunction with the +/–and CH Sel buttons to calibrate the speakers levels without entering the Setup menu. When TEST button is pressed, the test noise (pink noise) is output. Use the +/– buttons to increase
Resumen del contenido incluido en la página 13
Remote controller Select Zone 2 in the Home menu to display the Zone 2 operation buttons. [56] – CONT + MUTE CH +/– button LIGHT For selecting a tuner preset channel in the remote zone (Zone 2). + CH – VOL / buttons For adjusting the volume in the remote zone (Zone 2). VOL ON button For disabling the function of the remote zone (Zone 2). Zone 2 OFF button For activating the function of the remote zone (Zone 2). Input Selector buttons Selects an input source. CD: CD, DVD: DVD, Tuner: FM/AM, Phono
Resumen del contenido incluido en la página 14
Rear panel facilities Here is an explanation of the terminals found on the rear of the DTR- • Insert all plugs and connectors securely. Improper 8.2 and how they are used. Before connecting your audio and video connections can result in noise, poor performance, or components, be sure to read this section carefully and then proceed damage to the equipment. to the explanations on how to connect each individual component Improper connection (see page 18). • Be sure to always refer to the instructio
Resumen del contenido incluido en la página 15
Rear panel facilities PRE OUT COMPONENT VIDEO INPUT/OUTPUT These jacks are for connecting auxiliary power amplifier. If your DVD player or other device has component video Using auxiliary power amplifiers allows you to listen at louder connectors, be sure to connect them to these component video volumes than with the DTR-8.2 alone. If power amplifiers are used, connectors on the DTR-8.2. The DTR-8.2 has two component video connect each speaker to the corresponding power amplifier. input connecto
Resumen del contenido incluido en la página 16
Rear panel facilities AC OUTLETS (RI) The DTR-8.2 is supplied with AC mains outlets for connecting the The terminal on the DTR-8.2 is for connecting other Integra/ power cords from other devices so that their power is supplied Onkyo components equipped with the same terminal. When a through the DTR-8.2. By doing this, you can use the Standby/On component is -connected, you can point the remote controller button on the DTR-8.2 to turn on and off the connected devices as supplied with the DTR-8.
Resumen del contenido incluido en la página 17
Rear panel facilities IR IN/OUT GND Use this GND terminal for connecting the ground (or earth) wire if a If the DTR-8.2 is located inside a rack or cabinet that will not allow infrared beams to reach the IR sensor, you will need to connect a turntable is connected. Refer to “Connecting a turntable” on page 18. remote sensor to IR IN input to be able to use the remote controller. Then install the remote sensor in an unblocked location where you can easily point the remote controller. Using a mini
Resumen del contenido incluido en la página 18
Connections Here is an explanation of how to connect the main components to the Audio connection cable DTR-8.2 in the standard manner. There are many ways that any one component can be connected, and it is up to you to decide which Left (white) L method best fits your situation. The directions given here are only one option and should only be thought of as such. It is best to fully understand the nature of each connector and terminal as well as each of your components and their features to ascer
Resumen del contenido incluido en la página 19
Connections : Signal flow Video connection cable Component video connection cable Audio connection cable PR PR Left (white) L PB PB S video connection cable Y Y Right (red) R Digital audio input (optical) Digital audio output (coaxial) S Video input Digital audio output (coaxial) Video input R (red) Analog audio output L (white) DIGITAL PRE COMPONENT R (red) AUDIO VIDEO S VIDEO Analog audio OUTPUT R VIDEO TENNA OPT FRONT OUTPUT MONITOR input 1 OUT Video output Y L R SUB AM 2 ZONE 2 PB OUT L
Resumen del contenido incluido en la página 20
Connections DIGITAL PRE COMPONENT AUDIO VIDEO S VIDEO OUTPUT TENNA R VIDEO OPT FRONT 7. Settop box, video camera MONITOR OUTPUT 1 OUT Y (VIDEO 3) R L SUB AM 2 OUT ZONE 2 PB R (red) COAX SURR S Video input 1 IN DVD PR SURR BACK/ INPUT 1 Analog audio ZONE 2 Video input FM 2 OUT Y 75 output L (white) VIDEO 1 FRONT 3 IN PB DIO L (white) Analog audio L OPT Video output SUB input 1 PH OUT PR VIDEO 2 INPUT 2 SURR S Video output 2 CD IN Y R (red) SURR OUT BACK 3 IN VIDEO 3 PB Digital audio outp
