Manual de instrucciones de Extron electronic sSMD 101

Resumen del contenido incluido en la página 1

SMD 101 • Setup Guide
The Extron SMD 101 decodes video or graphics streams from an IP network,
plays back internal video and audio files, and plays Video On Demand files from network shares at their original resolution or
scaled up or down to any common SD, HD, or graphics resolution up to 1900x1200 (WUXGA). The SMD 101 can be deployed in
live event streaming and high level conferencing for specialized projects.
Mount the SMD 101
Before connecting the SMD 101, turn off all devices that will

Resumen del contenido incluido en la página 2

LR LR SMD 101 • Setup Guide (Continued) Output Connections b HDMI output – Connect an HDMI (or DVI with suitable adapter) display device to the HDMI output connector. The EDID of a connected display is read and the output automatically configured. For non-standard displays or devices, see the SMD 101 User Guide for additional output resolutions and format settings. c Audio output – Connect a balanced or unbalanced stereo (or dual mono) line level audio device to this 5-pole 3.5 mm captive scr

Resumen del contenido incluido en la página 3

Front Panel Features 1 2 3 4 5 IR CONFIG SMD 101 Figure 4. SMD 101 Front Panel a Power LED – Lights solid green when the SMD 101 is powered. Lights solid red when in standby (low power) mode. b Playback status indicator — Dual-color LED indicates the current state of playback operation: • Solid Green – The SMD 101 is actively decoding a stream. • Blinking Green – A stream is selected for decoding, but playback is paused. • Off – The selected stream is not being decoded. • Solid Red – Playback e

Resumen del contenido incluido en la página 4

SMD 101 • Setup Guide (Continued) Play a Stream: NOTE: The SMD 101 must be connected to a LAN to locate and play streams. Clips or streams stored in internal memory can be played without the need for a network connection. 1. In the Browser panel, select the Streams tab (see figure 5). 2. Click on an available stream to select it for decoding (see the SMD 101 User Guide for additional ways to specify or select streams). 3. Click on and drag the stream from the Streams browser panel and drop it

Resumen del contenido incluido en la página 5

Operation With Extron SME 100 Encoders For SME 100 stream discovery in the SMD 101 streams browser (see figure 5 on page 4), the SME 100 must have both Stream Control and SAP Control enabled to enable SAP announcements. The SME 100 settings are shown below. From the SME 100 default web page (see the SME 100 User Guide), select the Encoder Configuration link, then Encoder Settings to open the configuration dialog shown in figure 6 below. Streaming Configuration Stream Control Stream Method Des

Resumen del contenido incluido en la página 6

SMD 101 • Setup Guide (Continued) Connecting to Streams Without SAP Announcements For a source that is not configured for SAP announcements (such as IP cameras), the RTSP (pull) stream URI is entered directly in the Source: field of the SMD 101 player controls. The URI prefix (udp in the example below) corresponds to the streaming method. UDP or RTP Connections To connect the SMD 101 to a stream using the destination port of the encoder, use the following template: udp://@: F

Resumen del contenido incluido en la página 7

Play Video on Demand The SMD 101 can play video on demand from network shares and supports the following file types: Video: [mp4,ts,m2t,m2ts,mov*,264,m4v,flv*,sdp] NOTE: *Supports files that use H.264 encoding and AAC audio only. Images: [bmp,jpg,jpeg,tif,tiff,png,gif], NOTE: TIFF files using JPEG compression are not supported. Audio: [wav,aac,m4a] Playlists: [jspf, m3u, m3u8, pls, and xspf]. The shared folder must be added to the player browser file list. To add a shared folder: 1. From the Fi

Resumen del contenido incluido en la página 8

Play Local Content Browser The SMD 101 has internal memory reserved for local content. Local content is viewed Files from the browser Files tab. A typical folder structure for the internal memory is shown at right. / NOTES: audio • The media folder is currently reserved for future use. Do not put user Audio-File-1.m4a content files in the folder. clips Video-clip-1.mp4 • TMP folders are not accessible. images 1920x1080-Image.jpg Content (up to 175 MB total) can be transferred directly to the