Manual de instrucciones de PYLE Audio PTA1000

Resumen del contenido incluido en la página 1

Resumen del contenido incluido en la página 2

SAFETY INSTRUCTIONS Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be strong enough to create a risk electric shock to a person. Intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: To reduce the risk of electric shock, DO NOT ATTEMPT TO OPEN THE AMPLIFIER OR REMOVE THE COVER. There are not user serviceable parts inside

Resumen del contenido incluido en la página 3

9. Unplug the amplifier during lightning storms or when unused for long periods of time. 10. Refer all servicing to qualified service personnel. Servicing is required when the amplifier has been damaged in any way. Some examples-when the power cord or plug is damaged, liquid has been spilled, objects have fallen into the amplifier, the amplifier has been exposed to rain or moisture, it does not operate normally, or has been dropped. 11. Never break off the ground pin and connect only to a prop

Resumen del contenido incluido en la página 4

OPERATION 1. INPUT GAIN (dB) These controls are used to adjust the input gain of each channel. They determine how loud each channel of the power amplifier will sound for a given input signal level. The maximum input gain is achieved by turning the control completely clockwise - this setting yields the maximum mixer/system headroom. Turning the control back counter-clockwise will yield lower system noise at the expense of mixer/system headroom. Turning the control fully counter- clockwise turns

Resumen del contenido incluido en la página 5

7. LEVEL INDICATOR Channel A and Channel B level LED indicator. 8. INPUT Cannon and input jack connector provide balance or unbalance input mode. 9. MODE SWITCH This switch is used to select STEREO or BRIDGE mode operation. 10. GROUND LIFT SWITCH 11. BINDING POST OUTPUTS Shockproof binding posts are provided. For each channel, the outputs are in parallel and the speaker connection cables can be terminated with banana plugs or stripped wires. 12. SPEAKER OUTPUT The amplifier provides (3) four co

Resumen del contenido incluido en la página 6

SPECIFICATIONS PTA 1000 PTA 1400 1. INPUT SPECIFICATIONS: 1. INPUT SPECIFICATIONS: Input characteristics: Input characteristics: Input impedance balance. 20K ohms Input impedance balance. 20K ohms Non-balance ................10K ohms Non-balance .................10K ohms Input level ...................... +4 dB Input level ....................... +4 dB Power Input: Power Input: Input voltage ........115/230 V (AC) Input voltage ........ 115/230 V (A

Resumen del contenido incluido en la página 7

6

Resumen del contenido incluido en la página 8

PyleAudio.com 718.535.1800 718.236.2400 (fax) 1600 63rd Street, Brooklyn NY 11204