Resumen del contenido incluido en la página 1
A 21 Amplifier
Owner’s Guide
Resumen del contenido incluido en la página 2
1 THANK YOU! Congratulations and Thank You for Choosing Parasound Your new Parasound Halo Series A 21 power amplifier presents the latest advancements in amplifier technology. The A 21 is built to the strict quality and performance standards set by Parasound. We’re proud to offer you this exceptional audio component that will bring you many years of enjoyment and dependability. Here at Parasound, we design our products to perform at a higher level of flexibility and sonic pe
Resumen del contenido incluido en la página 3
1 TABLE OF CONTENTS A 21 Amplifier 1 PLACEMENT GUIDELINES FOR YOUR A 21 _________________________________________________________________________________ 2 CONNECTING A STEREO PREAMPLIFIER OR A SURROUND CONTROLLER TO THE BALANCED INPUTS ON YOUR A 21 _________________________________________________________________________________ 3 CONNECTING A STEREO PREAMPLIFIER OR A SURROUND CONTROLLER TO THE UNBALANCED INPUTS ON YOUR A 21 _______________________________________________________________
Resumen del contenido incluido en la página 4
1 PLACEMENT GUIDELINES FOR YOUR A 21 Power amplifiers are usually heavier and generate more heat than other components. To avoid damage to the A 21 or other equipment and to reduce risk of fire, you must follow these guidelines: • Place the A 21 on a separate shelf that will adequately support its weight. • Keep it away from heat sources such as air ducts or radiators. • Avoid placing it on carpeting or another material that might obstruct airflow into the openings in the chassis bottom. • L
Resumen del contenido incluido en la página 5
CONNECTING A STEREO PREAMPLIFIER OR A SURROUND 2 CONTROLLER TO THE BALANCED INPUTS ON YOUR A 21 Left and Right Balanced Input Jacks Balanced connections will give you the best sound. If your preamplifier or surround controller has balanced XLR output jacks, we recommend that you connect them to these inputs. Refer to the Balanced and Unbalanced Lines in the Technically Speaking section for additional information about why we recommend using balanced lines. What You’ll Need: Ma
Resumen del contenido incluido en la página 6
RCA Plugs CONNECTING A STEREO PREAMPLIFIER OR A SURROUND 3 CONTROLLER TO THE UNBALANCED INPUTS ON YOUR A 21 Left and Right Unbalanced Inputs Use these inputs if your preamplifier or surround controller doesn’t have balanced output connectors or if you simply prefer to use unbalanced connections. What You’ll Need: Left • A pair of shielded interconnect cables with RCA plugs Right • A source component with RCA output jacks Before Connecting Leave the AC cord on the A 21 disco
Resumen del contenido incluido en la página 7
RCA Plugs CONNECTING THE A 21 LOOP OUT JACKS 4 TO ANOTHER POWER AMPLIFIER’S INPUTS Loop Out Connector The Right and Left Loop Out jacks provide connections to route the same input signals from your preamplifier or surround controller to an additional power amplifier. In most instances, you won't use the loop out feature so you can skip this section. What You’ll Need: Left • One pair of shielded interconnect cables with RCA plugs Right • An additional amplifier Before Connecting Leave
Resumen del contenido incluido en la página 8
5 CONNECTING SPEAKERS TO YOUR A 21 Speaker Terminals The five-way binding post speaker terminals on the A 21 accept most speaker wire terminations including single or dual banana plugs, 1/4” spade lugs, or bare wire. Refer to Bare Wire Speaker Termination in the Technically Speaking section for information about bare wire termination. What You’ll Need: Common Speaker Connectors Red usually The GND notch designates right signifies ground • Two lengths of speaker wire or speaker left
Resumen del contenido incluido en la página 9
Right Left 6 CONFIGURING THE A 21 FOR BRIDGED MONO OPERATION In certain applications, you may require your A 21 to power a single 8 Ω speaker by using its bridged mono feature. In most instances, you won’t use the A 21 this way and you can skip this section. What You’ll Need: • One length of speaker wire with banana plugs, spade lugs, or bare wires • One shielded balanced or unbalanced interconnect cable for each A 21 used in bridged mono • One loudspeaker with an
Resumen del contenido incluido en la página 10
7 MANUAL AND AUTOMATIC TURN ON-OFF OPTIONS You can manually turn the A 21 on and off with its front panel On-Off button. It can also be triggered to turn on and off automatically when your preamplifier, surround controller, or system controller is turned on and off. Manual On-Off from the Front Panel If you want to manually turn on and off the A 21 at any time, you need to first select the Manual On-Off option by placing the Auto Turn On switch (on the rear panel) to its middle Man (M
Resumen del contenido incluido en la página 11
CONNECTING AN EXTERNAL DC SOURCE 8 FOR A 21 AUTOMATIC TURN ON-OFF If you want to automatically turn on and off the A 21 with an external DC voltage, choose the DC Triggering option by moving the Auto Turn On switch on the rear panel to its lower 12V position. What You’ll Need: • A cable with a 2.5 mm sub-mini plug on each end (provided) • A “control” component with +9Vdc to +12Vdc trigger voltage 2.5 mm sub-mini plug Before Connecting Remove Power to all the components in yo
Resumen del contenido incluido en la página 12
9 CONNECTING THE A 21 TO TRIGGER ANOTHER COMPONENT B Whenever the A 21 is turned on either manually or automatically, there is 12 Vdc present at its own DC Trigger Out jack so it can trigger additional amplifiers or other components on and off. What You’ll Need: • A cable with a 2.5 mm sub-mini plug on each end (in addition to the one provided with the A 21) 2.5 mm sub-mini plug • A component that can be triggered with an external +9 Vdc to +12 Vdc source. The A 21
Resumen del contenido incluido en la página 13
10 UNDERSTANDING THE INDICATORS ON THE A 21 A&B AC Present Indication When the A 21 is plugged into a live AC outlet, a soft blue halo glows behind its On-Off button and its red “P” Badge glows faintly. These indicate that the unit is plugged into a live AC outlet, even when it is turned off. On, Off and Fault/Protection Status Indicators B Whenever the A 21 is turned on, the soft blue glow behind its On-Off button will change to red for about five seconds as its internal circuits st
Resumen del contenido incluido en la página 14
11 CONNECTING THE A 21 AC POWER CORD AC Power Connections We recommend that you plug your A 21 into the same AC wall outlet or power strip that powers your other audio components, especially the preamplifier or system controller. Having all the audio components on the same power circuit helps prevent hum caused by possible ground loops. The A 21 requires AC power that is continuous rather than switched on and off. 110 V - 120 V or 220 V - 240 V Operation The A 21 can operate on either
Resumen del contenido incluido en la página 15
12 MAINTAINING YOUR A 21 Your Parasound A 21 power amplifier requires no periodic maintenance and has no user-serviceable parts inside. To avoid the risk of electric shock, do not remove its top cover. The amplifier’s exterior can easily be cleaned with a soft cloth pre-moistened only with a few drops of water or glass cleaner. Main Power Fuse If this fuse blows, please contact Parasound Technical Service for further advice. Notes:
Resumen del contenido incluido en la página 16
13 TROUBLESHOOTING GUIDE PROBABLE CAUSE REMEDY TROUBLE Power cord is disconnected Connect power cord No power Auto Turn On selector switch is in Check for correct position of the Auto Turn On wrong position switch Make sure the switch is in the AC Voltage selector switch is in the correct position for your region wrong position Replace with same value fuse AC fuse blown DC trigger source wired in reverse Auto turn on doesn’t Check polarity of DC source with a voltmeter or voltage too low f
Resumen del contenido incluido en la página 17
14 SERVICING YOUR A 21 If All Else Fails –Call Us for Help Call your Parasound dealer or Parasound’s Technical Service Department toll free at 1-866-770-TECH (8324). We can often solve the problem with simple diagnostic tests you can perform yourself. If we determine that your A 21 will need further inspection or servicing, we will: a) Refer you to an authorized Parasound repair center near you, or b) Authorize return of the unit to us and advise you of the correct procedure. Procedure f
Resumen del contenido incluido en la página 18
15 TECHNICALLY SPEAKING Audio Trigger Sensitivity Adjustment The Audio Sensitivity Control sets the threshold conductors with respect to ground. Therefore, it is of the audio trigger signal. You can adjust this canceled or rejected by the differential input circuit. level from a maximum sensitivity of 50 mV (fully counterclockwise) to a minimum sensitivity of This phenomenon of rejecting noise signals common 200 mV (fully clockwise). If you set this control
Resumen del contenido incluido en la página 19
16 TECHNICALLY SPEAKING continued Choosing Interconnect Cables and Speaker Wire Loop Out Jacks We are often asked to recommend specific The Right and Left Loop Out jacks are convenient interconnect cables and speaker wire. It’s true that connections to route the same input signals from your with some amplifiers, sound quality will vary greatly preamplifier or surround controller to an additional according to interconnect cables and speaker wires. power amplifier. These jacks eliminate the
Resumen del contenido incluido en la página 20
17 PARASOUND A 21 DESIGN OVERVIEW chosen for their low Equivalent Series Resistance Circuit designed by John Curl (ESR) and dielectric absorption. In addition, these filter Parasound design consultant John Curl has been a capacitors are bypassed with smaller polypropylene legend among audiophiles and electronic engineers capacitors to reduce AC ripple in the DC supply and for decades. He pioneered measurements to correlate to further eliminate noise and interference that is musical accur
