Resumen del contenido incluido en la página 4
AMPLIFIER FEATURE DESCRIPTIONS SUPER SPORT AMPLIFIERS: ! Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged ! All Autotek amplifiers feature a comprehensive diagnostic system, with speaker lead operation except the mono amps which are capable of 4, 2 and 1-Ohm loads. short circuit, and amplifier DC faults indicated by the red “PROTECT” LED. ! Tri-Mode operation with any stereo pair of amplifier channels is possible, as with all ! CAUTION: DO NOT OPERATE ANY AMPLI
Resumen del contenido incluido en la página 5
AMPLIFIER FEATURE DESCRIPTIONS SUPER SPORT AMPLIFIERS: LINE INPUT: Accepts unbalanced RCA inputs from 0.2 volts to 9 volts. SS1000.1D / SS1500.1D 1-CHANNEL MONO AMPLIFIERS LINE OUTPUT: The unbalanced RCA outputs are set the same as the CROSSOVER switch on he top mount control. INPUT OUTPUT BALANCED LEVEL PHASE REMOTE BASS EQ SUBSONIC LOW PASS PWR BALANCED INPUT: Accepts balanced line inputs from 0.4 volts to 12 volts for the INPUT optional M
Resumen del contenido incluido en la página 6
L L LEVEL BASS EQ HPF LPF X-OVER MODE + - gnd - + HI INPUT 5V 0.2V 0dB 12dB 60Hz 1.2KHz 30Hz 250Hz FULL LPF HPF MONO STEREO R R LINE OUT LINE INPUT L L LEVEL BASS EQ HPF LPF X-OVER MODE + - gnd - + HI INPUT 5V 0.2V 0dB 12dB 60Hz 1.2KHz 30Hz 250Hz FULL LPF HPF MONO STEREO R R LINE OUT LINE INPUT SS75.2 / SS125.2 / 2 CHANNEL AMPLIFIER APPLICATION
Resumen del contenido incluido en la página 7
+ - + - + - + - L L L L LEVEL BASS EQ HPF LPF X-OVER MODE LEVEL BASS EQ HPF LPF X-OVER MODE + - gnd - + + - gnd - + HI INPUT HI INPUT 5V 0.2V 0dB 12dB 60Hz 1.2KHz 30Hz 250Hz FULL LPF HPF MONO STEREO 5V 0.2V 0dB 12dB 60Hz 1.2KHz 30Hz 250Hz FULL LPF HPF MONO STEREO R R R R LINE OUT LINE INPUT L
Resumen del contenido incluido en la página 8
+ - + - + - + - + - + - + - + - CHANNEL 3 / 4 CH3 CH4 LEVEL BASS EQ HPF LPF LINE INPUT X-OVER M ODE R + - gnd + + 5V 0.2V 0dB 12dB 60Hz 1.2KHz 30Hz 250Hz FULL LPF HPF 2 3 4 CHANNEL HI INPUT LEVEL BASS EQ HPF LPF X-OVER + - gnd + + L CH3/4 CH1/2 CH1 CH2 5V 0.2V 0dB 12dB 60Hz 1.2KHz 30Hz 25
Resumen del contenido incluido en la página 9
CHANNEL 3 / 4 CHANNEL 3 / 4 CH3 CH4 LEVEL BASS EQ HPF LPF X-OVER CH3 CH4 LEVEL BASS EQ HPF LPF X-OVER M ODE LINE INPUT MODE LINE INPUT R R + - gnd - + 2 3 4 + - gnd - + 2 3 4 5V 0.2V 0dB 12dB 60Hz 1.2KHz 30Hz 250Hz FULL LPF HPF 5V 0.2V 0dB 12dB 60Hz 1.2KHz 30Hz 250Hz FULL LPF HPF CHANNEL CHANNEL HI INPUT HI INPUT LEVEL BASS EQ HPF LPF X-OVER + - gnd - + LEVEL BASS
Resumen del contenido incluido en la página 10
REMOTE OUTPUT INPUT BASS SUB LOW CONTROL BOOST SONIC PASS LEVEL POWER L L PROTECT 0dB 12dB 15Hz 55Hz 40Hz 150Hz 6V 0.2V R R SS500.1 / SS7500.1 / MONO AMPLIFIER APPLICATIONS Basic application These sub bass amplifiers can be used in any of the bi-amplification systems SUBSONIC:15 Hz to 35 Hz described in this manual, replacing the 2 channel amplifiers as per the BASS EQ: 0 to +12dB illustrations
Resumen del contenido incluido en la página 11
INPUT OUTPUT BALANCED LEVEL PHASE REMOTE BASS EQ SUBSONIC LOW PASS PWR INPUT L L 9V 0.2V 0 180 0dB 12dB 15 35Hz 35 250Hz PRO R R SS1000.1D / SS1500.1D / MONO AMPLIFIER APPLICATIONS Basic application These sub bass amplifiers can be used in any of the bi-amplification systems SUBSONIC:15 Hz to 35 Hz described in this manual, replacing the 2 channel amplifiers as per the BASS EQ: 0 to +12dB
Resumen del contenido incluido en la página 12
12 GAUGE JUMPER WIRE INPUT OUTPUT BALANCED LEVEL PHASE REMOTE BASS EQ SUBSONIC LOW PASS PWR INPUT INPUT OUTPUT BALANCED LEVEL PHASE REMOTE BASS EQ SUBSONIC LOW PASS PWR IN INPUT L L IN L L 9V 0.2V 0 180 0dB 12dB 15 35Hz 35 250Hz PRO OUTPUT MASTER OUTPUT 9V 0.2V 0 180 0dB 12dB 15 35Hz 35
Resumen del contenido incluido en la página 13
11 autotek SUPER SPORT SERIES AMPLIFIER FEATURES 0
Resumen del contenido incluido en la página 14
SETTING UP SYSTEMS AFTER INSTALLATION FOR BEST PERFORMANCE SS75.2 / SS125.2 / SS75.4 / SS125.4 General: At this point you are ready to get more specific on the settings for your amplifier. High Pass: -When in Hi Pass operation, this setting acts as a low frequency cut off for your system reproduction. The point that you set it at cuts off any frequencies from reproduction beyond this point. The 12 o’clock position is a great starting point. EXAMPLE: If you adjust the High Pass to 100Hz, the amp
Resumen del contenido incluido en la página 15
TROUBLESHOOTING A SYSTEM The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Autotek amplifiers The diagnostic system will shut down the amplifier, until reset by turning the head unit off, and back on. This state of affairs will be indicated by the front panel PROTECT LED lighting up under the following conditions: 1 - A sort circuit on the loudspeaker lea
Resumen del contenido incluido en la página 16
a utotek SUPER SPORT AMPLIFIERS Maxxsonics Limited Warranty As the manufacturer of Maxxsonics, Autotek, Crunch, MB Quart and Hifonics car audio products, Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Year from date of purchase. All other parts and accessories of the system are warrantied to be free from defects in material and workmanship for one (1) year from date of purchase. Maxxsonics will repai
Resumen del contenido incluido en la página 17
Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
SUPER SPORT AMPLIFIERS Autotek is proud to introduce the finest high end car audio products available and would like to thank you for your continued support. The Super Sport Series products have been designed to a very high level of performance, with features unavailable in any other products. All of the amplifiers have variable crossovers built in, with added touches such as subsonic filter, bass equalization and a bass remote control module option that allows bass control from with in reach
Resumen del contenido incluido en la página 3
GENERAL INSTALLATION PROCEDURE System Design The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link. Please remember that higher power systems are not necessarily useful purely for high sound pressure levels, but also to establish a headroom capability, to reproduce musical peaks cleanly without distortion. Lower power amplifiers will clip ea
