Manual de instrucciones de Anthem Audio SFP-1

Resumen del contenido incluido en la página 1

OWNER’S MANUAL
THE SONIC FRONTIERS SFP-1 & SFP-1 SIGNATURE PHONO S T A G E

Resumen del contenido incluido en la página 2

CONTROL FUNCTIONS AND CONNECTIONS A B C A-Mute/Operate Switch - In the mute position, this toggle switch cuts off the signal to the outputs (F) of the SFP--1 hence muting the unit; the LED (B) flashes as a reminder. In the operate mode, the outputs are connected and the SFP-1 operates normally. B-Power Indicator LED - This LED lights when the SFP-1 is on and receiving power from the AC source. It will flash at one second intervals during warmup delay and muting. C-Power Switch - This toggle sw

Resumen del contenido incluido en la página 3

D E F G H G -Left and Right Channel RCA Single-Ended Phono D-Detachable Power Cord Socket - Plug the Detachable Stage Input Connectors - These inputs accept a single- Power Cord into this socket (see Figure 1). The SFP-1 is factory ended input connection from a turntable’s output connectors. set for the correct operating voltage for the area in which it is The turntable equipped with a Moving Coil or Moving Magnet sold (see shipping box for voltage setting). If a different operat- Cartridge (see

Resumen del contenido incluido en la página 4

INSERTION OF THE TUBES AND G A I N S E T T I N G The SFP-1 comes with two Sovtek 6922 (6DJ8-type) and two 12AT7A Repeat this step for the remaining tubes; LV2 tube to the LV2 tube sock- tubes (the SFP-1 Signature comes with two Mullard 6DJ8/6922 and et, V1 tube to the V1 tube socket and V2 tube to the V2 tube socket. two Gold Aero12AT7A Gold Grade), individually boxed, marked and bagged along with a cotton glove, screwdriver, and screws for 7. Two slide switches for gain setting left and right c

Resumen del contenido incluido en la página 5

OPERATION OF THE SFP-1 PHONO STAGE T R O U B L E S H O O T I N G Before plugging in the SFP-1, check to see that the unit is configured If at any time the SFP-1 Phono Stage fails to work properly, consult for the correct AC line voltage for country of use. The operating AC this checklist: line voltage is indicated on the side of the shipping box. If the SFP-1 1. Check that the AC Detachable Power Cord is plugged into the Phono Stage is set incorrectly for the country in which it is to be opera

Resumen del contenido incluido en la página 6

SFP-1 PLACEMENT FOR PROPER VENTILATION LIMITED FIVE YEAR WARRANTY Allow at least 6” (15 cm) of clear space above the SFP-1 chas- Sonic Frontiers, Inc. warrants to the purchaser that each SFP-1 sis for proper ventilation, making sure the air vent slots in the Phono Stage is free of manufacturing defects for a period of chassis cover remain unobstructed. five (5) years from the date of purchase. This five (5) year limit- ed non-transferable warranty excludes all vacuum tubes, which we warrant for

Resumen del contenido incluido en la página 7

SFP-1 & SFP-1 SIGNATURE TECHNICAL SPECIFICATIONS Frequency Response 20 Hz to 20 kHz ± 0.3 dB (RIAA accuracy) THD & Noise < 0.05% @ 1.0V output Gain 37 dB Moving Magnet (selected internally) 57 dB Moving Coil Output Impedance 1K ohms @ 1 kHz Input Impedance 47K ohms (adjusted internally) Channel Separation > 40 dB (20 Hz to 20 kHz) Power Requirements 35 VA 50/60 Hz (maximum) Tube Complement 2 - Sovtek 6922 2 - 12AT7A Signature Version 2 - Mullard 6DJ8/6922 2 - Gold Aero 12AT7A Gold Grade Dimensi

Resumen del contenido incluido en la página 8

We at Sonic Frontiers are sure that you will derive many years of listening pleasure with your new SFP-1 or SFP-1 Signature Phono Stage. This Owner’s Manual contains important informa- tion regarding the operation and care of the SFP-1. Be sure to read this manual carefully and follow these instructions in order to keep it looking, operating and sounding its best. 2790 Brighton Road, Oakville, Ontario, Canada L6H 5T4 Telephone: (905) 829-3838 Facsimile: (905) 829-3033 Sonic Frontiers can