Resumen del contenido incluido en la página 1
® ®
The Bose Acoustimass 15 Series II and Acoustimass 16
Home Entertainment Speaker Systems
August 13 , 2002
AM264924_00_V.pdf
Bose Corporation
Resumen del contenido incluido en la página 2
Safety Information WARNING: To reduce the risk of fire or electric shock, do not expose the powered ® Acoustimass module to rain or moisture. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, insert fully. CAUTION AVIS RISK OF ELECTRICAL SHOCK RISQUE DE CHOC ÉLECTRIQUE DO NOT OPEN NE PAS OUVRIR ATTENTION : AFIN DE RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE, CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, NE PAS RETIRER LE CAPOT DE L’APPAREIL (ou son panneau
Resumen del contenido incluido en la página 3
Contents Where to find… Setting Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Unpacking the carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Placing your speakers to achieve realistic
Resumen del contenido incluido en la página 4
Setting Up Before you begin ® ® We appreciate your choice of the Bose Acoustimass 15 series II or Acoustimass 16 home entertainment speaker system. ® Bose Virtually Invisible speaker technology allows you to enjoy lifelike home performances from the very latest surround-sound encoded movies, CDs, and television shows, without a room full of speakers. The cube speaker arrays, along with the powered Acoustimass mod- ule, reproduce the full-spectrum of sound from multi-ch
Resumen del contenido incluido en la página 5
Setting Up Figure 1 Carton contents 20-ft (6.1m) system input cable Three 20-ft (6.1m) front speaker cables ® Powered Acoustimass Rubber feet for front center module cube speaker array With Acoustimass 15 Series II system With Acoustimass 16 system Six cube speaker arrays Five cube speaker arrays Two 50-ft (15.2m) rear speaker cables Three 50-ft (15.2m) rear speaker cables Power cord (1) USA/Canada Europe UK/Singapore Australia Placing your speakers to achieve realistic home theater
Resumen del contenido incluido en la página 6
Setting Up ® Figure 2 For Acoustimass 15 Series II For Acoustimass 16 Suggested home theater layouts RR RR C C R R CR L L LR LR CAUTION: To prevent interference, keep the Acoustimass module at least 2 feet (.6m) from your TV set. For Acoustimass 15 Series II For Acoustimass 16 Figure 3 Sound patterns Front center cube speaker array The front center cube speaker array localizes action and dialogue on your screen. Sound should seem to come from within the picture. • Place the fr
Resumen del contenido incluido en la página 7
Setting Up Front left and right cube speaker arrays The front left and right cube speaker arrays create a sound image wider than the screen that seems natural to viewers sitting anywhere in the room. You can place the cube speaker arrays near a TV screen with no picture interference. Place the front cube speaker arrays on either side of your TV, at least 6 feet (2m), or as much as 15 feet (5m) apart (see Figure 2). Rear cube speaker arrays The rear, or surround cube speake
Resumen del contenido incluido en la página 8
Setting Up Connecting the speakers CAUTION: Never connect the cube speaker arrays directly to a receiver output. Always con- ® nect them to the powered Acoustimass module, then connect the module to the receiver. CAUTION: Never use broken or frayed wiring, which can result in electrical shock or damage to your system. The supplied cables are not intended for in-wall installation. Check local building codes or enlist a qualified installer. Connecting front cube spea
Resumen del contenido incluido en la página 9
Setting Up 1. Connect the wire pair marked CENTER to the center cube speaker array. Press the termi- nal tab on the back of the cube speaker array. Insert the marked (+) wire into the red ter- minal and the plain (–) wire into the black terminal. Release the tab to secure the wires. 2. Connect the wire pair marked RIGHT to the right front cube speaker array (to the right of the TV as you face it). 3. Connect the wire pair marked LEFT to the lef
Resumen del contenido incluido en la página 10
Setting Up ® Connecting the Acoustimass module to the receiver The 20-foot (6.1m) system input cable connects the module to your surround receiver (see Figure 6). The system input cable has a multi-pin connector on one end and several wire pairs on the other. The wire pairs of the cable may be separated or “unzipped” as much as needed to comfortably reach the surround receiver connections. Each wire pair is marked on the cable jacket with RIGHT, LEFT, CENTER, RIGHT SURROUND, LEFT
Resumen del contenido incluido en la página 11
Setting Up Figure 6 ® Acoustimass module to receiver connections Note: The center surround connection is used only when a center rear speaker is installed. FRONT SPEAKERS A Thumbscrews R L CENTER R L CENTER FRONT SPEAKERS A SURROUND SPEAKERS LFE/SUBWOOFER OUT R L CENTER R L CENTER Note: Cables may be separated or “unzipped” as much as needed to comfortably reach the surround receiver connections. 11 AM264924_00 _V.pdf • August 13, 2002 Audio Output Left Center Right Rear Rear Rear Audio
Resumen del contenido incluido en la página 12
Setting Up Checking the connections ® Check all connections from the receiver to the Acoustimass module and from the module to the cube speaker arrays (Figure 5 and Figure 6). Make sure all cube speaker arrays are con- nected to the proper terminals according to their position in your room. Check that all wires are connected to your surround receiver in phase (+ to + and – to –). Incorrect wiring can result in a total loss of module output. Correct wiring problems before you plug your receive
Resumen del contenido incluido en la página 13
Using your system For realistic home theater sound ® CAUTION: The Acoustimass 15 Series II and Acoustimass 16 speaker systems incorporate an automatic protection circuit, which guards against most kinds of damage from electrical stress or overload. This circuit activates at high volume levels to reduce output, causing a slight decrease in volume. This is normal operation and indicates that power input may be exceeding safe levels. Sustained listening at these levels is not recommended. Adjus
Resumen del contenido incluido en la página 14
Using your system Be sure to get the digital audio signal To be sure that the digital audio signal from your DVD player reaches your surround receiver, connect the digital audio output from your DVD player to the digital audio input on your receiver (Figure 7). Before you play a DVD disc, be sure to select the digital output in the setup menu of your DVD player. For additional setup and operating information, please refer to the owner’s guide that came with your surround receiver. Figure 7 N
Resumen del contenido incluido en la página 15
Reference Troubleshooting ® If you have a problem with your Acoustimass speaker system, turn off your sound source ® and try the following solutions. If you still have a problem, contact your Bose dealer to arrange for service. To contact Bose directly, refer to the list of service offices and phone numbers enclosed in the shipping carton. Problem What to do System does not function • Make sure the receiver and powered Acoustimass module are plugged into an operating at all AC wall outlet an
Resumen del contenido incluido en la página 16
Reference Cleaning the speakers ® The cabinets of your Acoustimass speaker system may be cleaned only with a soft dry cloth. Do not use any sprays near the system or allow liquids to spill into any openings. Also, do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. The grille assemblies on the cube arrays may be carefully vacuumed, if necessary. Please note that the drivers are located directly behind the grille cloth, and are easily damaged i
Resumen del contenido incluido en la página 17
Reference Warranty period ® ® Your Bose Acoustimass speaker system is covered by a limited transferable warranty. Details of the warranty are provided on the warranty card that came with your system. Please fill out the information section on the card and mail it to Bose. Accessories • Table stands: UTS-20B (black), UTS-20W (white) • Floor stands: UFS-20B (black), UFS-20W (white) • Wall brackets: UB-20B (black), UB-20W (white) • Module input cable adapter for use with existing wiring: PN267138
Resumen del contenido incluido en la página 18
©2002 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA 264924 AM Rev.00 JN20951 AM264924_00 _V.pdf • August 13, 2002
