Manual de instrucciones de Phoenix Gold AST-220C

Resumen del contenido incluido en la página 1

AST-220S
AST-220C
USER MANUAL

Part # 8100.0310
Phoenix Gold International, Inc. 9300 North Decatur Street Portland, Oregon 97203 Tel: 503.286.9300 Fax: 503.978.3391
Website: www.audiosource.net Email: support@phoenixgold.com

Resumen del contenido incluido en la página 2

If you wish to extend the speakers beyond the 2” to 3” The AudioSource AST 220S and AST 220C were minimum that presents no problem. Please note that the specifically designed for use in a Home Theater system. distance between the right and left speakers should not be Additionally, this speaker system has been optimized to greater than the distance from the speakers to the enhance the total theater experience with flat panel listener’s position. displays such as Plasma, LCD and DLP Proje

Resumen del contenido incluido en la página 3

Note: If the screws do not The bracket for the AST 220S and AST 220C has a seem to align properly with “Center Line” stamped into it, and indicates where the the four channels of the center of the speaker will be located when mounted onto aluminum extrusion of the the bracket. Use this “Center Line” to locate the brackets AST 220S, loosen the four vertically For the AST 220S loudspeakers and horizon- Pan Head screws that retain tally for the AST 220 C. the steel plate to the bottom of

Resumen del contenido incluido en la página 4

With the AST 220S and the AST-Stand lying flat, attach Specifications the two wires together, noting that the slide-on connectors are sized differently to maintain proper phase in the AST 220S Home Theater Satellite connection. Now, carefully slide the metal support into the channel on the rear of the AST 220S. Align the four brass  Plasma application "slim" wall mount design pins extending from the top of the AST-Stand with the four loudspeaker system channels on the inside of the A