Resumen del contenido incluido en la página 1
U C A
NS-P610
HOME CINEMA 5.1CH SPEAKER PACKAGE
5.1 SYSTEM D’ENCEINTES HOME CINEMA
OWNER’S MANUAL
MODE D’EMPLOI
I
Resumen del contenido incluido en la página 2
• Explanation of Graphical Symbols CAUTION The lightning flash with arrowhead RISK OF ELECTRIC SHOCK symbol, within an equilateral triangle, DO NOT OPEN is intended to alert you to the presence of uninsulated “dangerous CAUTION: TO REDUCE THE RISK OF voltage” within the product’s ELECTRIC SHOCK, DO NOT REMOVE enclosure that may be of sufficient COVER (OR BACK). NO USER-SERVICEABLE magnitude to constitute a risk of PARTS INSIDE. REFER SERVICING TO electric shock to persons.
Resumen del contenido incluido en la página 3
FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS Compliance with FCC regulations does not guarantee that UNIT! interference will not occur in all installations. If this This product, when installed as indicated in the product is found to be the source of interference, which instructions contained in this manual, meets FCC can be determined by turning the unit “OFF” and “ON”, requirements. Modifications not expressly approved please try to eliminate the problem b
Resumen del contenido incluido en la página 4
UNPACKING After unpacking, check that the following items are contained. DEBALLAGE Après le déballage, vérifier que les pièces suivantes sont incluses. Main and rear speakers Pin plug cord [3m] Enceintes principales et arrière Câbles à fiches Speaker cords [10m] Câbles d’enceintes X 4 X 4 Center speaker Enceinte centrale Speaker cords [4m] Câbles d’enceintes X 3 Mounting brackets Subwoofer Supports de montage Subwoofer X 4 STANDBY/ON HIGH CUT VOL
Resumen del contenido incluido en la página 5
English Thank you for selecting this YAMAHA NS-P610 Speaker Package. CAUTION: Read this before operating your unit. To assure the finest performance, please read this manual Do not cover the rear panel of this unit with a newspaper, a ● ● carefully. Keep it in a safe place for future reference. tablecloth, a curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage Install the speakers in a cool, dry, clean place – away from ● t
Resumen del contenido incluido en la página 6
For U.K. customers SPECIAL INSTRUCTIONS FOR U.K. MODEL If the socket outlets in the home are not suitable for the plug IMPORTANT: supplied with this appliance, it should be cut off and an appropriate 3 THE WIRES IN MAINS LEAD ARE COLOURED IN pin plug fitted. For details, refer to the instructions described below. ACCORDANCE WITH THE FOLLOWING CODE: Note: The plug severed from the mains lead must be destroyed, as a Blue: NEUTRAL plug with bared flexible cord is hazardous if engaged in a live sock
Resumen del contenido incluido en la página 7
English SETTING UP THE SPEAKERS Before making connections, place all speakers in their respective positions. The positioning of the speakers is important because it controls the whole sound quality of this system. Place the speakers depending on your listening position by following the instructions below. Placing speakers Speaker configuration Main speakers: On both sides of and at approximately This speaker package employs a 6 speaker configuration: 2 the same height as the TV set. main speaker
Resumen del contenido incluido en la página 8
Mounting the rear speakers Mount the rear speakers on a shelf, rack or directly on the floor, or hang them on the wall. 1 To mount the rear speakers on a wall by using the provided mounting brackets Bracket 1 Attach the bracket to the rear of the speaker by using the provided screws. Remove the provided pads from Screw the backing sheet and put them at the lower corners of the speakers. 2 Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the mounting
Resumen del contenido incluido en la página 9
English Mounting the center speaker Place the center speaker on top of the TV, on the floor To mount the center speaker on top of under the TV or inside the TV rack so that it is stable. the TV When placing the speaker on top of the TV, put the provided fasteners at two points on both the bottom of the speaker and on top of the TV to prevent the speaker from falling. Speaker on top of the TV TV set 1 2 Fastener Speaker inside the TV rack Notes ● Do not place the speaker on top of the TV whose
Resumen del contenido incluido en la página 10
CONNECTIONS General information for connections Caution: Plug in the subwoofer and other audio/video components after all connections are completed. * For the main and rear speakers only, connect one ● Connect the main, center and rear speakers to the speaker to the left (marked L) terminals of your speaker output terminals of your amplifier with the amplifier, and another speaker to the right (marked R) provided speaker cords. terminals. * The provided speaker cords have labels marked FRONT L,
Resumen del contenido incluido en la página 11
English How to connect speaker cords For connections, keep the speaker cords as short as Main/center/rear speakers possible. Do not bundle or roll up the excess part of the Red: positive (+) cords. If the connections are faulty, no sound will be heard Black: negative (–) from the speakers. Make sure that the + and – polarity markings of the speaker cords are observed and set correctly. If these cords are reversed, the sound will be unnatural and lack bass. 3 1 How to Connect: 1 Loosen the kn
Resumen del contenido incluido en la página 12
Various ways of connecting the subwoofer Connecting the subwoofer to line output (pin jack) terminals of the amplifier (The basic way) Connect the main speakers to the speaker output terminals of the amplifier. ● To connect with a YAMAHA DSP amplifier (or AV ● To connect the subwoofer to the SPLIT SUBWOOFER receiver), connect the SUBWOOFER (or LOW PASS etc.) terminals on the rear of the DSP amplifier, connect them terminal on the rear of the DSP amplifier (or AV receiver) to both the left L an
Resumen del contenido incluido en la página 13
English Connecting the subwoofer to speaker output terminals of the amplifier If your amplifier has only one set of main speaker output terminals Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT terminals of the subwoofer to the main speakers. Right main Left main speaker speaker OUTPUT INPUT2 AUTO STANDBY TO SPEAKERS OUTPUT INPUT2 AUTO TO SPEAKERS STANDBY LOW HIGH OFF FROM AMPLIFIER INPUT1 HIGH LOW OFF FROM AMPLIFIER INPUT1
Resumen del contenido incluido en la página 14
USING THE SUBWOOFER (YST-SW45) Controls and their functions Front panel STANDBY/ON HIGH CUT VOLUME 50Hz 150Hz 0 10 SUPERWOOFER SYSTEM YST-SW45 STANDBY/ON HIGH CUT VOLUME 50 Hz 150 Hz 010 123 4 OUTPUT INPUT2 AUTO STANDBY TO SPEAKERS Rear panel 6 (General model) OUTPUT INPUT2 AUTO TO SPEAKERS STANDBY LOW HIGH LOW HIGH 7 POWER OFF FROM AMPLIFIER INPUT1 OFF FROM AMPLIFIER INPUT1 ON 8 9 OFF VOLTAGE SELECTOR 240V VOLTAGE SELECTOR POWER 240V 5 ON OFF 0 1 Power indicator 4 VOLUME control Lights up w
Resumen del contenido incluido en la página 15
English 8 INPUT2 terminals 0 VOLTAGE SELECTOR switch (China and general Used to input line level signals from the amplifier. models only) (Refer to “CONNECTIONS” for details.) If the preset setting of the switch is incorrect, set the switch to the proper voltage range (220V-240V or 9 AUTO STANDBY (HIGH/LOW/OFF) switch 110V-120V) of your area. This switch is originally set to the OFF position. By Consult your dealer if you are unsure of the correct setting this switch to the HIGH or LOW position,
Resumen del contenido incluido en la página 16
Adjusting the subwoofer before use Before using the subwoofer, adjust the subwoofer to obtain the optimum volume and tone balance between the subwoofer and the main speakers by following the procedures described below. Front panel STANDBY/ON HIGH CUT VOLUME 50Hz 150Hz 0 10 SUPERWOOFER SYSTEM YST-SW45 STANDBY/ON HIGH CUT VOLUME 50 Hz 150 Hz 010 3 5 6 1 Set the VOLUME control of the amplifier to 6 Increase the volume gradually to adjust the minimum (0). volume balance between the subwoofer and t
Resumen del contenido incluido en la página 17
English Frequency characteristics Adjustment of the VOLUME control and the HIGH CUT control should be changed depending on the room size, the distance from the subwoofer to the main speakers, sources, etc. Following figures show the optimum adjustment of each control and the frequency characteristics when this subwoofer is combined with NS-10MMT. Frequency characteristics of this subwoofer dB (YST-SW45) HIGH CUT 100 Hz 90 HIGH CUT 150 Hz 80 70 HIGH CUT 50 Hz 60 50 40 20 50 100 200 500Hz ● When
Resumen del contenido incluido en la página 18
ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY (for YST-SW45) The theory of Yamaha Active Servo Technology has been By employing negative-impedance drive circuits, the based upon two major factors, the Helmholtz resonator and amplifier is able to generate precise, low-amplitude, low- negative-impedance drive. Active Servo Processing frequency waves with superior damping characteristics. speakers reproduce the bass frequencies through an “air These waves are then radiated from the cabinet opening as woo
Resumen del contenido incluido en la página 19
English TROUBLESHOOTING Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. Problem Cause What to Do No sound. Speaker cords are not connected Connect them securely. securely. Sound level is too low. Speaker cords are not connected Connect them correctly, that is L (left) to correctly. L, R (
Resumen del contenido incluido en la página 20
SPECIFICATIONS NS-10MMT YST-SW45 Type ............. 2-way 2-speaker bass-reflex speaker system Type ............... Active Servo Processing Subwoofer System Magnetically shielded type Driver ............................... 20 cm (8”) cone woofer (JA2162) Driver Magnetically shielded type Woofer ...................................... 9 cm (3-9/16”) cone type Tweeter .......................... 2.5 cm (1”) balanced dome type Amplifier Output .................................................... 70W/
