Resumen del contenido incluido en la página 1
SV Sound
O WNERS’
G UIDE
SVS PB10-NSD Powered Box —
NSD 10” Woofer
Contents:
Chapter 2 Safety instructions
Chapter 3 SVS Welcome
Chapter 4 About your SVS subwoofer
Chapter 5 General subwoofer features
Chapter 6 Setup, integration, and calibration
Chapter 7 Subwoofer specifications
Chapter 8 Terms and Conditions
Last update: 27 April, 2008
Resumen del contenido incluido en la página 2
Chapter 2-1 SV Sound IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi
Resumen del contenido incluido en la página 3
Chapter 2-2 SV Sound 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is re- quired when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been ex- posed to rain or moisture, does not operate normally, or has been dropped. 15. WARNING: To reduce the
Resumen del contenido incluido en la página 4
Chapter 3 Page 4 SV Subwoofers SV Sound Welcome! At SVS, you can actually hear the tireless research and design efforts built in to our subwoofers and speak- ers. Years are spent developing any SVS product — with work typically spanning from our Ohio headquar- ters… to US west coast technology centers… and over to the finest component suppliers in Asia, USA and Europe as well. Nothing in our lineup is an “off the shelf” product. SVS is committed to making better sound
Resumen del contenido incluido en la página 5
SV Subwoofers Chapter 4 SV Sound About your SVS Subwoofer There maybe be other subwoofers that look like them, but virtually none work like them. SVS subwoofers are decidedly different in how they are designed, produced, sold, and the exceptionally high quality components we use. You could have spent much more on other brands and still not come close to the performance our products provide. What makes a subwoofer an SVS? Quality components, sane prices. You might be surprised
Resumen del contenido incluido en la página 6
Chapter 5-1 SV Sound Powered Box Basic Common Features. SVS subwoofer amps use the most durable and accurate designs possible. Get familiar with yours! Volume/Gain Use “gain” (in conjunction with your Audio Video Receiver (AVR) subwoofer output level control) to achieve bass level calibration to your liking. Start your setup with the sub’s volume/gain no more than 1/4 to 1/3 of the way up (turned clockwise from the left). Phase. Think of long bass waves as conflicting o
Resumen del contenido incluido en la página 7
Chapter 6-1 SV Subwoofers SV Sound Setup, calibrating and integration What’s to know? Setup is easy! However, there are key steps which must be done carefully and correctly, read on: Unpacking. Take a few moments to carefully unpack everything. Save the box and shipping materials, just in case you need to return the sub for any reason. Location. Where you put a sub is important to how it will sound. Use a corner if you can, and avoid putting your sub where it might a
Resumen del contenido incluido en la página 8
SV Sound Chapter 6-2 SV Sound More Setup, calibrating and integration If you are running a pair of SVS subwoofers (Fig. 2), you will need to use an inexpensive “Y” cable adapter (d.) From the “Y” cable you can run a stan- dard 75 Ohm RCA signal cable (e.) to each sub, thus “splitting” the Low Fre- quency Effects (LFE) and other bass from your receiver, and effectively feed- ing both subwoofers with the same signal (when phase is properly adjusted, achieving a significant 6dB of ad
Resumen del contenido incluido en la página 9
Chapter 6-3 SV Sound Also, is your subwoofer turned “ON”? We don’t mean “is your sub- woofer amplifier on?” but rather, is your AVR sending a bass sig- nal to your sub amp? This can only happen if you say “Yes” (or “ON”) in the “Subwoofer” selection during the setup of your AVR’s setup menu. Is your receiver connected to the sub amp? Use a well-shielded “RCA” cable (sometimes called a “patch cord”) to connect the subwoofer output of your AVR to the RCA input on the subwoofer’s a
Resumen del contenido incluido en la página 10
Page 10 Page Cha 10 pter 6 -4 SV Sound But what’s “too high”?? Tastes vary, and do movie soundtracks, but your SVS subwoofer is capable of tremendous levels of low distortion, low fre- quency bass — far more than most subs in this size or price class. Take advantage of this, especially if you like action movies with lots of “.1” channel (LFE) bass action, and give the sub a bit extra gain during calibration. Keep in mind too that the human ear is relatively insensitive to low freque
Resumen del contenido incluido en la página 11
SV Sound Chapter 7-2 Specifications Model Name: PB10-NSD Configuration: Powered Box, front-firing 10” woofer Vented Design: 19” High x 15” Wide x 21” Deep Dimensions: H x W x D 48 cm H. x 38 cm W. x 53 cm D. Weight: 60 lbs (27 kg) 110~120V/60hz (US/Canada/South America) Voltage (fixed): 220~240V/50hz (Europe, Russia, other) 10” SVS designed/built “NSD” woofer with high - excursion synthetic surround, polypropylene cone with cast basket, high-temp US voic
Resumen del contenido incluido en la página 12
Chapter 8 SV Sound Terms and Conditions Terms and Conditions: Details are available on request, please contact your Dealer for more. Note that these terms and conditions do not affect your statutory rights. Shipping: When you receive your new subwoofer, please check to en- sure there is no damage. If after unpacking you discover any damage that may have been caused by transportation on your product, we request you contact SVS or if outside the USA your Dealer immediately and if
