Manual de instrucciones de Sonance 91922

Resumen del contenido incluido en la página 1

8 to 12 feet
I N S T A L L A T I O N I N S T R U C T I O N S
SONANCE ELLIPSE LCR IN-CEILING SPEAKER
PN. 33-2528
INTRODUCTION RECOMMENDED PLACEMENT CONTINUED
Thank you for purchasing the Sonance Ellipse LCR in-ceiling speaker.
Proper placement of the Ellipse LCR is critical for maximum
When properly installed, this product will provide you with years of performance. Try to apply as many of the following recommendations
entertainment pleasure. in your installation.
To obtain the full potential

Resumen del contenido incluido en la página 2

WIRE GAUGE AND QUALITY The total wire resistance should be less than 10% of the speaker impedance. If using an 8 ohm speaker, your total wire resistance should be no more than 0.8 ohms. In simple terms, the extra resistance from the wire will have a very negative affect on the sound quality of the speaker. The sound can be less dynamic, definition of bass frequencies can be reduced, and in extreme cases, the high frequencies can be attenuated. Amplifier power is also wasted in the wire, reducing

Resumen del contenido incluido en la página 3

INSTALLING THE SPEAKERS Step 1 Remove the paint plug from the speaker. Attach the wire from your amplifier to the terminals on the back of the speaker. Double check the polarity of the speaker wires, amplifier + to speaker + and amplifier - to speaker -. Proper polarity is critical in home theater installations. PAINTING THE SPEAKERS AND GRILLES Speakers and grilles can be painted before installation, which will eliminate the "paint scar" if the speaker needs to be removed for service. Speakers

Resumen del contenido incluido en la página 4

5 7/8" 9" (229mm) (149mm) 15 1/2" (394mm) Ellipse 1.0 LCR TECHNICAL ASSISTANCE AND SERVICE The Technical Assistance Department at Sonance is available at (800) Speaker Design In-ceiling LCR infinite baffle 582-0772 or (949) 492-7777 to answer any questions concerning the operation and installation of your speakers between the hours of 7:00 Tweeter 1/2" (13mm) Cloth dome, pivoting AM and 5:00 PM Pacific time, Monday through Friday, except holidays. Midrange 4" (102 mm) Polypropylene cone, pivotin