Resumen del contenido incluido en la página 1
operation manual
SW-95, SW-85, SW-62
SW-54, SW-52, SW-51
SW-50
TM
Miller & Kreisel Sound, Inc.
9351 Deering Avenue
Chatsworth, CA 91311-5858 USA
(818) 701-7010 fax (818) 701-0369
www.mksound.com
©2002 Miller & Kreisel Sound, Inc.
frameless in-wall speaker
Resumen del contenido incluido en la página 2
FRAMELESS IN-WALL SPEAKER TABLE OF CONTENTS 1. INTRODUCTION........................................................................................3 COMPONENT OVERVIEW...................................................................................3 2. INSTALLATION INTO EXISTING WALLS..........................................................4 3. SPEAKER WIRING..........................................................................................4 4. SPEAKER WIRING FOR SW-85 AND SW-95 ONLY..
Resumen del contenido incluido en la página 3
FRAMELESS IN-WALL SPEAKER 1. INTRODUCTION Congratulations! Your new M&K in-wall speaker system will give you years of unmatched enjoyment and excitement while listening to your favorite musical and audio/video sources. We encourage you to read this owner’s manual, as there is a great deal of information provided here to help you achieve the best possible performance. If you have any questions about your in-wall speaker system, please contact your M&K dealer or call the M&K factory directly at (8
Resumen del contenido incluido en la página 4
FRAMELESS IN-WALL SPEAKER 2. INSTALLATION INTO EXISTING WALLS IMPORTANT! - MAKE SURE WALL ELECTRICITY IS ! ! TURNED OFF BEFORE STARTING INSTALLATION 1. ALL MODELS: Mark wall with template, 2. ALL MODELS: Cut opening precisely 3. SW-95, SW-50, SW-51 ONLY: using a stud finder to maintain a 2" distance with drywall saw, drywall router, etc. Your speaker installation kit includes a foam from any stud. Make sure that you are clear Sand edges and clean debris from strip to fill in the wall space aro
Resumen del contenido incluido en la página 5
FRAMELESS IN-WALL SPEAKER However, getting the best tonal balance in any given room involves many variables. Therefore, the SW-85 and SW-95 speak- ers allow you to alter their tonal balance in order to get the ideal sound quality at your favorite listening location (where it counts!), for the program and playback levels you are using—all by selecting the appropriate combination of input terminals to connect the speakers to your amplifier. The terminals are labeled EQUALIZED and NORMAL. The label
Resumen del contenido incluido en la página 6
FRAMELESS IN-WALL SPEAKER frequency response at the listeners' ears. It produces the flattest overall frequency response with your wall- or ceiling- mounted SW speaker. This position is sometimes referred to as the "German" sound. LOW CUT (HIGH PASS FILTER) / WIDE RANGE TERMINALS (SW-85 and SW-95 only) BASS ROLL OFF Your M&K SW series speaker has very high power handling for an architectural speaker. But it is possible to overdrive the woofer with deep bass signals, especially when you are using
Resumen del contenido incluido en la página 7
FRAMELESS IN-WALL SPEAKER 12. Tip the unit vertically and pass the top edge of 13. Raise the unit and press it toward the wall until it the mounting arms through the wall opening, allowing rests on the metal flanges and is flush with the wall. the unit to rest on the bottom mounting screws. 15. Tighten all mounting screws sequentially to light 14. Make sure that the baffle is level by checking resistance. Continue to tighten screws to an even with a leveling device. torque that will secure the
Resumen del contenido incluido en la página 8
FRAMELESS IN-WALL SPEAKER If you have any questions about your speaker system, please contact your M&K dealer or call the M&K factory directly at (818) 701-7010, from 8:30 AM to 5:00 PM Pacific Time, Monday through Friday. We will be happy to help you with any question. Additional information may also be obtained on our web site www.mksound.com or you may send us an e-mail to support@mksound.com. 6. SATELLITE AND SUBWOOFER PHASE TEST When using a subwoofer with your SW-150, a phasing test must b
Resumen del contenido incluido en la página 9
FRAMELESS IN-WALL SPEAKER 8. IF YOU NEED SERVICE Contact your dealer or M&K with a complete description of the problem. Please have the unit's model and seri- al numbers (found on the back of the cabinet), date of purchase, and your dealer's name. You can call M&K between 8:30 AM and 5:00 PM Pacific Time, Monday through Friday, at (818) 71-7010. If you call outside these hours, leave a message, and we will return your call. Alternatively, you may send us an e-mail to service@mksound.com. DO NOT
Resumen del contenido incluido en la página 10
FRAMELESS IN-WALL SPEAKER 11. PRE-CONSTRUCTION BRACKET INSTALLATION NOTE: This step is optional and applies to new construction only. IMPORTANT! - MAKE SURE WALL ELECTRICITY IS ! ! TURNED OFF BEFORE STARTING INSTALLATION ! Note: Detailed Pre-Construction instructions are included with the Pre-Construction Bracket kit. The following instructions are intended as an overview only. staples 3. Run the speaker wire to the location 1. Attach the mounting strips to 2. Attach the bracket assembly of th
Resumen del contenido incluido en la página 11
FRAMELESS IN-WALL SPEAKER 12. SPECIFICATIONS SW-95 & SW-62 IMPEDANCE: 4 ohms RECOMMENDED POWER: amplifiers with between 25 and 200 watts continuous MAXIMUM POWER: 200 watts RMS unclipped peaks FREQUENCY RESPONSE: 70 Hz - 20 kHz ± 2 dB SENSITIVITY (2.83 V @ 1m): 92dB OVERALL DIMENSION (H x W): 12.75” x 9.75” CUTOUT DIMENSION (H x W): 10.56” x 7.25” WEIGHT: 10 lbs. MOUNTING DEPTH: 3.67” (SW-95) 3.58” (SW-62) SW-85 & SW-52 IMPEDANCE: 4 ohms RECOMMENDED POWER: amplifiers with between 25 and 200 wa
Resumen del contenido incluido en la página 12
FRAMELESS IN-WALL SPEAKER In-wall speaker manual PN# 70071 08/29/02 rev. 2 pt/qrk
