Resumen del contenido incluido en la página 1
Studiophile BX5
Users Manual
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Studiophile BX5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Front and Rear Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 2
Introduction Thank you for choosing the BX5 Studiophile Series bi-amplified studio nearfield monitor speakers. M-Audio is well known for digital audio interface technology, digital converters, audio preamps and mixers. Now, after extensive research and development, the Studiophile BX5 is born to change the concept of studio reference monitoring. The BX5 was designed and tested by veteran audio engineers to meet your needs in a studio monitoring environment. It is focused on the functional goal o
Resumen del contenido incluido en la página 3
2. Tweeter By employing a specially developed 1-inch silk dome with magnetic shielding, the tweeter can deliver distortion-free original sound and offer extremely natural response. It minimizes reaction time by using fabric silk for excellent delivery, and also minimizes resonance by adapting a unique internal damping technology. 3. Sub-Frequency Port The hole in the rear panel is called a Sub-Frequency Port and is designed to discharge extreme low frequencies under 60 Hz. 4. EQ and Acoustic Spa
Resumen del contenido incluido en la página 4
Front and Rear Panel Features Rear Panel 1. XLR INPUT:This jack accepts XLR input connections with either balanced or unbalanced wiring. The input wiring of an XLR connector should be as follows: XLR PIN 1 Signal ground (Shield) XLR PIN 2 Signal positive (+) XLR PIN 3 Signal negative (–) 2. TRS INPUT: This jack accepts 1/4” connections with either balanced or unbalanced wiring. For balanced wiring, a three-conductor TRS plug is necessary. The input wiring of a TRS connector should be as fol
Resumen del contenido incluido en la página 5
The TRS input is summed through a balanced input amplifier with the XLR input, allowing both inputs to be used simultaneously. Input specifications apply to both. 3. PRODUCT LABEL: This label contains the model and serial number information. 4. VENT PORT: This port aids in reproduction of very low frequencies by discharging frequencies below 60 Hz. 5. VOLUME CONTROL: Use the volume control to set the output sound pressure from the BX5 to proper levels as required. 6. LOW CUTOFF: This 3-position
Resumen del contenido incluido en la página 6
Front Panel The front panel houses the Power LED, which indicates whether the speakers (amplifier) power is on or off. Installation For optimal performance of the BX5, please read the following thoroughly and carefully prior to installation. Precautions Handling: Please do not touch the speaker cones.The BX5 set is packaged in the box tightly, so your attention is required when taking the monitors out of the box.To avoid possible damage to the speaker units, hold both sides of the monitor in or
Resumen del contenido incluido en la página 7
Correct Power Operation: Since the BX5 contains its own amplifier, it must be connected to a power outlet using the detachable AC cable provided. Before connecting power, please make sure that the Voltage-Select Switch located on the speaker’s rear panel is set to the appropriate position, as described in the rear-panel features list appearing earlier in this manual. WARNING! - Use of improper Voltage-Select Switch combinations may result in hazardous conditions and/or damage to speaker componen
Resumen del contenido incluido en la página 8
Connecting to Preamp, Computer or Game Console Outputs Before connecting, make sure the output device’s power has been turned off. Plug the XLR balanced, TRS balanced or TS unbalanced cable to the corresponding output connectors of a pre-amplifier, computer or game console. Setting the EQ Switches Low Cutoff: This 3-position switch sets the Low Cutoff frequency, selecting between 56Hz, 80Hz and 100Hz. Use the 100Hz setting to emulate a small speaker setup, the 80Hz setting for Normal Low Frequen
Resumen del contenido incluido en la página 9
Mid-Boost:This 2-position switch selects between the “In” and “Out” Mid-Boost modes.The Out mode produces a flat midrange response for normal monitoring conditions, while In will move the sound stage forward toward your listening position. 'Mid-Boost In' High-Freq:This 3-position switch selects High Frequency compensation with -2dB, 0dB or +2dB.The 0dB (normal) position produces flat response for use in most common applications. Use -2dB if your mixes translate as dull or lacking in high frequen
Resumen del contenido incluido en la página 10
Setting the Acoustic Space Switch The Acoustic Space switch is a 3-position switch used to select the "Acoustic Space" in which the speaker is placed—Half Space (speakers against wall, 0dB position), Three-Quarter Space (speakers in corners or close to wall, -2dB position), or Full Space (speakers away from wall, -4dB position).The benefits of using this switch are explained in the following paragraphs. The bass response of any loudspeaker will differ depending on its placement. If the speaker i
Resumen del contenido incluido en la página 11
Placing the BX5 Placing the speakers is one of the most important procedures in order to monitor sound accurately. To monitor with the BX5s performing to their maximum capability, an appropriate listening environment and correct placement are required. Please refer to the following for correct BX5 placement. 1. The two units and the listener should basically align to form a regular triangle. Refer to the following diagram. 2. Position the monitors so that the top of the woofers are level with yo
Resumen del contenido incluido en la página 12
Appendix A - Technical Specifications Type: Two-way studio reference LF Driver: 5-inch dia., magnetically-shielded with curved mineral-filled polypropylene cone, high temperature voice coil and damped rubber surround HF Driver: 1-inch dia., magnetically-shielded with natural silk dome Frequency Response: 56Hz - 20kHz Crossover Frequency: 3.0kHz LF Amplifier Power: 38W HF Amplifier Power: 38W S/N Ratio: >100dB below full output, 20kHz bandwidth Input Connectors: One XLR balanced input connector;
Resumen del contenido incluido en la página 13
Appendix B - Block Diagram 13 BX5 Filter 38 3.0 Mid-Freq. High-Freq. Switch 38 Filter L 3.0 Switch Switch 56Hz / 80Hz / 100hz Low Cutoff
Resumen del contenido incluido en la página 14
Technical Support & Contact Information For additonal help, contact M-Audio Technical Support by telephone (626-445-7556, 9-5 PST M-F), by fax (626-445-8407) or by e-mail (techsupt@m-audio.com). If you have any questions, comments or suggestions about this or any M-Audio product, we invite you to contact us directly at: M-AUDIO U.S. 45 E. Saint Joseph St. Arcadia, CA 91006-2861 U.S.A. Sales Information: 626-445-2842 Sales Information (email): info@m-audio.com Tech Support: 626-445-8495 Tech S
Resumen del contenido incluido en la página 15
Your BX5 Warranty M-AUDIO warrants that this product is free of defects in materials and workmanship under normal use for a period of One (1) year from purchase date, so long as the product is: owned by the original purchaser; the original purchaser has proof of purchase from an authorized M-AUDIO dealer; and the purchaser has registered his/her ownership of the product by sending in the completed warranty card. This warranty explicitly excludes any included external non-integrated power supplie
Resumen del contenido incluido en la página 16
Notes: BX5-111402 16
