Manual de instrucciones de Genelec 7050A

Resumen del contenido incluido en la página 1

Operating Manual
LSE Series
Genelec 7050A
Active Subwoofer

Resumen del contenido incluido en la página 2

Genelec 7050A Active Subwoofer overload protection and power-on signal General description Positioning in the room muting is included in the amplifier circuitry. Genelec 7050A active subwoofer is a very The amplifier also incorporates thermal over- The placement of the subwoofer in the room compact low frequency loudspeaker, load and short circuit protection. affects the overall frequency response and designed to extend the bass reproduction sound level of the system dramatically, as at I

Resumen del contenido incluido en la página 3

Figure 2. Recommended distances to front wall Figure 1. Connecting the 7050A to a pair of Genelec 1029A/2029A/2029B active monitors the bass level at lower frequencies and may subwoofer. Place the subwoofer into the right any objects filled with liquid, cause asymmetrical spatial imaging. end of the recess with the driver side facing such as vases on the Although the 7050A is magnetically the room. This leaves sufficient 7,5 centime- subwoofer or near it. shielded, it may

Resumen del contenido incluido en la página 4

7050A Operating Manual SYSTEM SPECIFICATIONS AMPLIFIER SECTION 7050A 7050A Free field frequency response Short term amplifier output (+/- 3 dB) 38 Hz…85 Hz power (Long term output power is limited by driver unit Maximum short term sine wave protection circuitry) 70 W SPL output averaged from 45 to 85 Hz, measured in Amplifier system distortion half space at 1 meter ≥ 100 dB SPL at nominal output THD ≤ 0.08% Maximum peak SPL output with random pink noise, measured Mains voltage 2