Resumen del contenido incluido en la página 1
EVID Design and Installation Reference Guide
Premium Surface Mount Speakers
Resumen del contenido incluido en la página 2
EVID Design and Installation Reference Guide ............................................................ 1 Mounting Questions.......................................................................................................... 4 I need to position some of the speakers in my installation on a shelf. How do I do this? ......................................................................................................................................... 4 What mounting accessories are
Resumen del contenido incluido en la página 3
Low Temperature........................................................................................................ 8 IEC Water Splashing................................................................................................... 8 What are the characteristics of the matching transformers in the EVID models? ......... 8 In what application would I use the “t” versions rather than the 8 Ohm models?........ 8 Do the EVID “t” models work with both 70v and 100v systems?...............
Resumen del contenido incluido en la página 4
Mounting Questions I need to position some of the speakers in my installation on a shelf. How do I do this? The EVID 3.2 and 4.2 full range models have accessory stands available which allow them to mount vertically or horizontally on a shelf or other flat surface. In addition, EVID 6.2 can be vertically mounted when using the appropriate stand. What mounting accessories are available for the EVID models to set up an array? The entire EVID full range line is particularly suited to wor
Resumen del contenido incluido en la página 5
System Design Questions Can I paint the EVID speakers to match the environment? Yes, the EVID 3.2, 4.2 & 6.2 are made of high impact ABS that accepts a wide variety of paints. For best results, follow the painting directions on page 10 of the Owner’s Manual. What finishes are the EVID models available in? The EVID lineup is available in white or black on all models, even the 12.1 subwoofer! They are pre-coated to eliminate fading, improve appearance and provide an easy to paint surface.
Resumen del contenido incluido en la página 6
What general guidelines do I consider when deciding on the physical placement of the EVID 12.1 subwoofer? It is often desirable to place the subwoofer in the middle of the room to get the most uniform coverage. Even though a subwoofer projects sound omni directionally and that the sound is generally not localizable, there is still a reduction in subwoofer sound level the farther away one gets from the subwoofers installed location. Placement in the middle of a room however lowers the sens
Resumen del contenido incluido en la página 7
In mono systems (with the inputs of the subwoofer paralleled), the amp views the loads hooked up to the Left and Right satellite outputs as being in parallel with each other. Make sure the amplifier can run loads of less than 4 ohms in this situation. What are some techniques to properly balance the levels between the subwoofer and satellites? The required sensitivity balance between the subwoofer and satellites varies by the musical requirements of the application. A sports bar or health
Resumen del contenido incluido en la página 8
conducted; Humidity, Low Temperature Cycle, High Temperature Cycle, UV Exposure, and Salt Spray. Salt Spray 48 hours continuous light spray consisting of 5% salt solution. This tests for resistance to the effects of an "aqueous salt atmosphere". It also gives a general indication of resistance to rusting. Humidity 48 hours of cycling. Starts at 100% humidity @ 27 degrees C; goes to 95% @ 35degrees and goes back to 100% at 27 degrees. It is to indicate resistance to a warm humid atmosph
Resumen del contenido incluido en la página 9
infrastructure of the audio system is a constant voltage design you would employ the “t” versions. Do the EVID “t” models work with both 70v and 100v systems? Yes, the same “t” models work on both 100v and 70.7v lines. Regardless whether you use 100v or 70.7v distributed line systems; you use the same model speaker. What are the power taps for the various EVID “t” models”? • 3.2t: A single (non-selectable) power tap rated at 5w@70v and 10w@100v. • 4.2t: The power taps are 30w, 15w and 7.
Resumen del contenido incluido en la página 10
EVID System Design Examples What are some typical systems designs incorporating EVID series speakers? The EVID series of surface mount speaker systems are especially well suited to working with the MA/MR mixer amps or the CPS-1, CPS-2 and CPS2T power amplifiers. Listed below are a number of suggested installation examples for a variety of environments incorporating EV amplification products. Please note: The equipment lists which follow do not list other required pieces commonly used i
Resumen del contenido incluido en la página 11
Small Bar or Restaurant Room size: 2500 Sq Ft. Source: Mid level music Equipment List Item Quantity Model Speakers 4 EVID 4.2 Main – Full Range CPS-1 Subwoofer 1 EVID 12.1 Amplification Power Amplifier 1 CPS-1 Doctors Office Room size: 300 Sq Ft. Source: Low level programmed music & voice paging Equipment List Item Quantity Model Speakers Main – Full Range 6 EVID 3.2t N/A Subwoofer MR355C Amplification Mixer/Amplifier 1 MR355C Large Retail Stor
Resumen del contenido incluido en la página 12
Theatre Lobby Room size: 3000 Sq Ft. Source: Low level music & voice paging Equipment List Item Quantity Model Speakers Main – Full Range 10 EVID 3.2t MA605B Subwoofer N/A Amplification Mixer/Amplifier 1 MA605B Sports Bar Room size: 4000 Sq Ft. Source: High level music Equipment List Quantity Model Speakers Main – Full Range 8 EVID 6.2 Subwoofer 2 EVID 12.1 Amplification CPS1 CPS1 2 CPS-1 Power Amplifier Shopping Mall Total area: 100000 Sq
Resumen del contenido incluido en la página 13
Stadium Total area: 100000 Sq Ft. Source: Announcement fill and voice paging Total amplifier power: 580 watts per channel The 6.2t’s are tapped at the 30w setting Equipment List Item Quantity Model Speakers Main – Full Range 102 EVID 6.2t Subwoofer N/A Amplification Power Amplifier 3 CPS-2T Mixer/Amplifier N/A CPS2T CPS2T CPS2T EVID Design and Installation Manual Page 13
