Resumen del contenido incluido en la página 7
STH-380PO/370PO/370PI/360PO STH-380PO/370PO/370PI/360PO Pendant Type Installation Pendant Type Installation ✽ Camera Wiring Diagram 7. Preparing Camera T his wiring diagram indicates the connection between the interface board and external Once the camera wiring is successful, prepare the equipment. For wiring Samsung Techwin’s Speed Dome Camera and the accessories, camera. Every housing-typed camera except the please refer to the Speed Dome Camera user’s manual. flush model is provid
Resumen del contenido incluido en la página 8
STH-380PO/370PO/370PI/360PO STH-380PO/370PO/370PI/360PO Pendant Type Installation Pendant Type Installation ✽ T o attach or detach the camera, refer to the picture. ■ 3.2 Ceiling Mount Type Installation * Attaching the camera: Hold up the camera and push it to the mount as shown in the picture. Push the camera until you hear a “click”. This guideline is based on the installation of the ceiling flange STB-30PF. * Detaching the camera: To detach the camera, pull the camera downward while push
Resumen del contenido incluido en la página 9
STH-380PO/370PO/370PI/360PO STH-380PO/370PO/370PI/360PO Pendant Type Installation Pendant Type Installation Camera Adaptor ■ 3.3 Indoor Flange Mount Type Installation Fan Heater Adaptor This guideline is based on the installation of the indoor flange STB-25PF and the (STH-380PO Only) ceiling exposed mount STB-370PC. Sealing Tape SPSS32A/SCH40 Size Pipe STB-30PF PF 1 1/4" 1. Preparing Pipe and Ceiling Bracket STB-30PF requires a SPSS32A/SCH40-sized pipe as shown in the picture. Assemble the
Resumen del contenido incluido en la página 10
STH-380PO/370PO/370PI/360PO STH-380PO/370PO/370PI/360PO Pendant Type Installation Pendant Type Installation 1. Assembling Flange and Ceiling Exposed Mount (STB-370PC) Notes Wind sealing tape around the barrel of the screw taps, and then secure the STP-25PF flange securely to the mount with the enclosed screws. • Do not connect the camer a to a po wer outlet until the installation is complete . Supplying power in the middle of the installation may cause fi
Resumen del contenido incluido en la página 11
STB-370PC STH-380PO/370PO/370PI/360PO Pendant Type Installation On-Ceiling Mount Type Installation 6. Attaching Camera ■ 4. On-Ceiling Mount Type Installation Carefully attach the camera to the mount following the alignment guide marks as shown in the picture. First hook the camera's safety cable on the mount, and then attach the camera. This guideline is based on the installation of the indoor flange STB-370PC. The safety cable is coiled inside the install base. As shown in the leftward pic
Resumen del contenido incluido en la página 12
STB-370PC STB-370PC On-Ceiling Mount Type Installation On-Ceiling Mount Type Installation 1. Attaching Template and Installing STB-370PC 3. Setting Up Camera DIP Switches Attach the enclosed template to the ceiling, then drill a hole in the ceiling according to the DIP switches for communication and ID protocols are located on the bottom of the diameter marked on the template. Drop the camera cables down from the ceiling through camera. For the switch settings, refer to the appendix of this
Resumen del contenido incluido en la página 13
STH-370PE STB-370PC On-Ceiling Mount Type Installation Indoor Flush Mount Type Installation ✽ T o attach or detach the camera, refer to the picture. ■ 5. Indoor Flush Mount Type Installation * Attaching the camera: Hold up the camera and push it to the mount as shown in the picture. Push the camera until you hear a “click”. This guideline is based on the installation of the flush mount STH-370PE. * Detaching the camera: To detach the camera, pull the camera downward while pushing the unloc
Resumen del contenido incluido en la página 14
STH-370PE STH-370PE Indoor Flush Mount Type Installation Indoor Flush Mount Type Installation 1. Attaching Flexible Adaptor Knob 4. Preparing Housing T o feed the cables through a pipe to a flush housing, attach the flexible adaptor enclosed Open the hinged door at the bottom of the housing. with the product. To attach the flexible adaptor, the install base must be disassembled as While pressing the spring lock (1), hold up the lid to shown in the picture. To disassemble the install base, un
Resumen del contenido incluido en la página 15
STH-370PE STH-370PE Indoor Flush Mount Type Installation Indoor Flush Mount Type Installation 7. Arr anging Camera Cables and Closing Hinged Door Notes Connect the cables to the terminal block on the hinged door. • Mak esur etofirsthookthecamer a'ssafetycabletothemountbefor eproceeding .Otherwise youmaybee xposedtoseriousinjurycausedb yafallencamer a. For the location of the wiring pins, please refer to the “Camera Wiring Diagram” on Page 12. Once the wiri
Resumen del contenido incluido en la página 16
STH-370PE Mounting Accessory Installation Mounting Accessory Installation ■ 6. Mounting Accessory Installation ■ STB-270B(Setup Box) MOUNT CAP This guideline is to be used for the installation of mounting accessories for the 1. Using self drilling screws , secure the install Samsung Speed Dome Camera series. bracket. 2. F ill unwanted wire holes with mount caps. Secure the mount cap with the mount cap fastener. MOUNT CAP FASTENER 3. Place the setup box on the install bracket as shown i
Resumen del contenido incluido en la página 17
Mounting Accessory Installation Mounting Accessory Installation ■ STB-350PPM (Parapet Mount) ■ STB-330PPM (Paul Mount) Compatible Models : STB-270PWV+STH-380PO/370PO/360PO/370PI Compatible Models : STB-30PF+STH-380PO/370PO/360PO/370PI Wall type mount 1. Secure the pole to the mount using a wire or cable. 1. Drill 8 anchor bolt holes on the wall according to 2. Use 4 1/4" screws to secure the STH-270PWV pole the holes in the parapet mount. mount to the wall. 2. Using a tool, insert anchor bo
Resumen del contenido incluido en la página 18
Product External Dimensions Product External Dimensions Unit : mm Unit : mm ■ Wall Mounting ■ Ceiling Mounting ■ Ceiling Exposed Mounting ■ Indoor Flush Mounting 35 34 SPEED DOME CAMERA ACCESSORIES SPEED DOME CAMERA ACCESSORIES
Resumen del contenido incluido en la página 19
Product Specifications Product Specifications Model Model STH-380PO STH-370PO STH-370PI STH-370PE STH-360PO STH-270PWV STB-496PPV STB-370PC STB-25PF STB-270B Item Item Operating Operating ℃ ℃ ℃ ℃ ℃ ℃ ℃ ℃ ℃ ℃ Temperature -40 ~50 -40 ~50 -10 ~50 -10 ~50 -40 ~50 Temperature -40℃~50℃ -20℃~50℃ -10℃~50℃ -10℃~50℃ -20℃~50℃ Range Range 0 to 90%RH 0 to 90%RH 0 to 90%RH 0 to 90%RH 1 to 90%RH 0 to 90%RH 1 to 90%RH Humidity Humidity 0 to 90%RH 0 to 90%RH 0 to 90%RH (non-condensing) (non
Resumen del contenido incluido en la página 1
Before attempting to operate this product,
please read the instructions carefully.
SPD-3750T/3750/3700T/3700/3350/3310/2510
Speed Dome Camera Accessories
Installation Manual
STH-380PO/STH-370PO/STH-360PO
STH-370PI/STH-370PE
STB-370PC/STH-270PWV/STB-496PPV
STB-25PF/STB-30PF/STB-350PPM
STB-330PPM/STB-340PCM/STB-270B
Resumen del contenido incluido en la página 2
Cautions and Warnings for Use Table of Contents 1. Product Category ………………………………………………………………… 4 Samsung Techwin cares for the environment at all product manufacturing stages 1.1. Housing Accessories ………………………………………………………… 4 to preserve the environment, and is taking a number of steps to provide 1.2. Interface Mounting Accessories ……………………………………………… customers with more environment-friendly products. The Eco mark represents 5 1.3. Mounting Bracket Accessories ……………………………………………… Samsun
Resumen del contenido incluido en la página 3
Product Category Product Category ■ 1.2. Interface Mounting Accessories ■ 1. Product Category ■ 1.1. Housing Accessories STB-370PC : “On-Ceiling Install Base Mount” for the Samsung STH-380PO/STH-370PO/STH-360PO Speed Dome Camera. : "Outdoor housing” with a built-in install base for the Samsung Speed Dome Camera. ■ 1.3. Mounting Bracket Accessories STH-380PO : Ultra Low-Temperature Heavyweight(-40℃~50℃) STH-370PO : STH-270PWV Low-Temperature Heavyweight(-20℃~50℃) STH-360PO : : T
Resumen del contenido incluido en la página 4
Product Category Speed Dome Camera Installation Category ■ 2. Speed Dome Camera Installation Category STB-30PF Pendant Type : “Ceiling Type Flange” for the Samsung Speed Dome Camera. STB-350PPM : P arapet Mount” for the installation of indoor or outdoor housing of Samsung Speed Dome Camera STB-330PPM Wall Type Mount Ceiling Type Mount Indoor Flange Type Mount : “P ole Mount” for the Samsung Speed Dome Camera. On-Ceiling Mount Type STB-340PCM : “Corner Mount” for the Samsung Speed Dome Came
Resumen del contenido incluido en la página 5
STH-380PO/370PO/370PI/360PO STH-380PO/370PO/370PI/360PO Pendant Type Installation Pendant Type Installation 1. Securing Wall Bracket and Wiring ■ 3. Pendant Type Installation As shown in the picture , secure the wall bracket to the wall, and then pull the wires out of the bracket. Please note that the STH-380PO housing requires an additional ■ 3.1 Wall Mount Type Installation installation of the fan heater adapter enclosed with the product. Fan Heater Adaptor (STH-380PO Only) Camera Adaptor
Resumen del contenido incluido en la página 6
STH-380PO/370PO/370PI/360PO STH-380PO/370PO/370PI/360PO Pendant Type Installation Pendant Type Installation 5. Securing Housing Check if the housing is properly attached Fan Heater Adaptor to the bracket, secure the housing to the (STH-380PO Only) Fan Heater Connector bracket with the enclosed screws. (Model: STH-370PO) Camera Adaptor 6. Wiring Terminal Cables Connect the cables to the terminal block on the hinged door. Once the wiring is successful, close the hinged door. Notes
Resumen del contenido incluido en la página 20
MEMO MEMO
