Resumen del contenido incluido en la página 1
TS-101 Turbo Station
User Manual (Version: 2.0.0)
©Copyright 2007. QNAP Systems, Inc. All Rights Reserved.
Resumen del contenido incluido en la página 2
FOREWORD Thank you for choosing QNAP products! This user manual provides detailed instructions of using TS-101. Please read carefully and start to enjoy the powerful functions of TS-101! NOTE • All features, functionality and other product specifications are subject to change without prior notice or obligation. • All brands and products names referred to are trademarks of their respective holders. LIMITED WARRANTY In no event shall the liability of QNAP Systems, Inc. (QNAP)
Resumen del contenido incluido en la página 3
Table of Contents Table of Contents .....................................................................................3 Safety Warnings.......................................................................................6 Chapter 1 Overview of TS-101 Turbo Station ........................................7 1.1 Introduction ...................................................................................7 1.2 Package Contents.........................................................
Resumen del contenido incluido en la página 4
3.4.6 Multimedia Station...................................................................64 3.4.7 Download Station ....................................................................65 3.4.8 Web Server ............................................................................66 3.4.9 DDNS Service .........................................................................67 3.4.10 View Network Settings...........................................................69 3.5 Device Configuration .
Resumen del contenido incluido en la página 5
5.2 Enable iTunes Service .................................................................. 110 5.3 Use UPnP Media Server................................................................ 112 Chapter 6 Download Station .............................................................115 Chapter 7 Web Server.......................................................................125 Chapter 8 FTP Server ........................................................................129 Chapter 9 Web File M
Resumen del contenido incluido en la página 6
Safety Warnings 1. TS-101 can operate normally in the temperature of 0ºC-35ºC and relative humidity of 0%-85%. Please make sure the environment is well-ventilated. 2. The power cord and devices connected to TS-101 must provide correct supply voltage (36W, 90-264V). 3. Do not place TS-101 in direct sunlight or near chemicals. Make sure the temperature and humidity of the environment are in optimized level. 4. Unplug the power cord and all connected cables before cleaning. Wipe TS-
Resumen del contenido incluido en la página 7
Chapter 1 Overview of TS-101 Turbo Station 1.1 Introduction Thank you for choosing TS-101 Turbo Station. This product has the following key features: 9-in-1 server: Multimedia Station, Download Station, Mirror Station, Disaster Recovery, Web Server, Backup Server, File Server, FTP Server, and Printer Server. Easy-to-use, simple configuration in a few steps and TS-101 is ready to use! Enormous storage capacity, support SATA disk of up to 500GB or above, and extendable to 1TB
Resumen del contenido incluido en la página 8
1.2 Package Contents Your TS-101 package contains: TS-101 Turbo Station Adaptor Power cord CD-ROM (user manual, Quick Installation Flat head screw x 4 Quick Install Wizard Guide and software inclusive) Ethernet cable x 1 Stand x 2 - 8 -
Resumen del contenido incluido en la página 9
1.3 Hardware Illustration One Touch Copy Button USB Ports eSATA LED indicators: Status, HDD, eSATA, LAN and Giga LAN Power Reset Button Power Cord Hook Power Connector K-Lock Power Button Security Slot - 9 -
Resumen del contenido incluido en la página 10
Chapter 2 Install TS-101 2.1 Install Hard Disk 1. Unfasten the two round head screws at the back of TS-101. Pull out the front case of TS-101 as shown below: Pull Pull 2. Install a hard disk in TS-101 drive plate. Make sure the disk holes of the disk match the holes of drive plate. Lock the disk with flat head screws. - 10 -
Resumen del contenido incluido en la página 11
3. After installing the disk, cover TS-101 with the front case and fasten the round head screws. Then place TS-101 vertically on the stands. - 11 -
Resumen del contenido incluido en la página 12
2.2 Hard Disk Recommendation List The following HDD models are verified by QNAP that are compatible with TS-101. It is recommended to use the disk models listed here. Other HDD brands that are not tested by QNAP may or may not work properly with TS-101. For more updated compatible hard disk information, please visit QNAP website at http://www.qnap.com. QNAP disclaims any responsibility for product damage/ malfunction or data loss/ recovery due to misuse or improper installatio
Resumen del contenido incluido en la página 13
Maxtor Buffer Capacity Rotational Model Name Model No. Interface Size (GB) Speed (RPM) (MB) Grizzly 3H500F0 SATA II 3Gb/s 500 7200 16 Grizzly 3H400F0 SATA II 3Gb/s 400 7200 16 DiamondMax 10 6L300S0 SATA 1.5Gb/s with NCQ 300 7200 16 DiamondMax 10 6B300S0 SATA 1.5Gb/s with NCQ 300 7200 16 DiamondMax 10 6L250S0 SATA 1.5Gb/s with NCQ 250 7200 16 MaxLine Plus II 7Y250M0 SATA 1.5Gb/s 250 7200 8 DiamondMax 10 6L200M0 SATA 1.5Gb/s with NCQ 200 7200 8 DiamondMax 10 6B200M0 SATA 1.5Gb/s
Resumen del contenido incluido en la página 14
2.3 Set up TS-101 Please check your network environment and select the appropriate installation method before installing TS-101. 1. Office/ Home Connect TS-101 and PC to the same hub/ switch/ router. 2. Individual Connect TS-101 directly to your PC by a network cable. - 14 -
Resumen del contenido incluido en la página 15
When you have verified your network environment, please follow the steps below to install TS-101. * Note: Please connect a USB printer to the server after the software configuration is completed. - 15 -
Resumen del contenido incluido en la página 16
2.4 Check System Status TS-101 provides LED indicators for you to indicate system status and information easily. When TS-101 is turned on, please check the following items to make sure system status is normal. LED System starting up System has started Blue Blue Power Blink in orange Orange Network (LAN) Orange Blink in orange Off Hard disk (HDD) Status Blink in red (short beep once) Green Blink in green (long beep once) - 16 -
Resumen del contenido incluido en la página 17
LED Display & System Status Overview LED LED Display & System Status Blue: System has started Power Blink in orange: Accessing network Network Blink in orange: Accessing data eSATA Blink in orange: Accessing data HDD Green: System is normal Blink in green: Hard disk not detected Blink in red: Bad blocks are found in hard disk Blink in green for 5 seconds, blink in green and red Status alternatively: Hard disk not initialized Blink in green and red alternatively: Disk capa
Resumen del contenido incluido en la página 18
2.5 Configure Software Settings After checking the system status, please follow the steps below to configure the ® software settings of TS-101. The configuration procedure of Windows and Mac users are different. Please select the appropriate procedure according to your OS. ® 2.5.1 Windows Users Insert TS-101 CD-ROM in your PC. Wait for a few seconds until the following screen shows up. Then start to configure the software settings of TS-101. 1. Select TS-101. - 18 -
Resumen del contenido incluido en la página 19
2. Select Install Quick Install Wizard. - 19 -
Resumen del contenido incluido en la página 20
3. Run Quick Install Wizard. When the wizard prompts for performing quick configuration, click OK. 4. Enter the default user name and password. Default user name: administrator Password: admin - 20 -
