Resumen del contenido incluido en la página 1
2-586-723-11 (1)
Cyber-shot Station
GB
Operating Instructions
FR
Mode d’emploi
CSS-PHB
2005 Sony Corporation
Resumen del contenido incluido en la página 2
English Before operating the product, please read this manual thoroughly and retain it for future reference. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For Customers in the U.S.A. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of imp
Resumen del contenido incluido en la página 3
CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not instal
Resumen del contenido incluido en la página 4
Features The CSS-PHB can be used with the DSC-P200 digital still camera. When you place a digital still camera (here in after referred to as the "camera") on the Cyber-shot Station, you can use the Cyber-shot Station in the following way. zYou can easily view images on a TV screen by wireless remote control. Using the remote control, you can operate the followings; – Viewing images – Slide Show – Playback zoom – Shooting images zWhen the CSS-PHB is connected to a PictBridge enabled printer, you
Resumen del contenido incluido en la página 5
Index Precautions .......................................................................................................................... 6 Before using the Cyber-shot Station ................................................................................ 6 Identifying the parts ...........................................................................................................7 Set up ....................................................................................................
Resumen del contenido incluido en la página 6
Precautions • The Cyber-shot Station is not a dust-proofed, moist-proofed or water proofed product. • Do not use or keep the Cyber-shot Station in locations subject to the following conditions: – Locations with extremes of temperature In closed automobiles during summer, the ambient temperature may be very hot, causing deformation or malfunction of the Cyber-shot Station. – Locations in direct sunlight or near heaters This may cause deformation or malfunction of the Cyber-shot Station. – Locatio
Resumen del contenido incluido en la página 7
Identifying the parts Cyber-shot Station Remote sensor INTERVAL SHOT button Multi connector Interval selector Interval Shot lamp CHARGE lamps A/V OUT (MONO) jack POWER lamp (USB) jack Remote sensor DC IN jack Remote Control SHUTTER button POWER button PRINT button Zoom (W/T) button Control buttons (v/V/b/B/ ) MENU button (Display / LCD on/off) button The remote control buttons share the functions as the ones on your camera. 7-GB
Resumen del contenido incluido en la página 8
Preparing the remote control Set up Notes on the remote control • The remote control is powered by a button Preparing the Cyber-shot Station type lithium battery (CR2025) installed at the factory. To avoid draining the battery, an Connect the AC adaptor to the DC IN jack of insulation sheet is inserted. Before using the the Cyber-shot Station. remote control for the first time, remove the Cyber-shot Station insulation sheet. • Point the remote sensor of the Cyber-shot Station away from strong li
Resumen del contenido incluido en la página 9
Charging the battery Viewing images on a TV pack screen Place the camera with the battery pack 1 Connect the A/V connecting cable inserted on the Cyber-shot Station. (supplied) to the A/V OUT (MONO) jack of the Cyber-shot Station and the audio/ Charging starts automatically. Both the / video input jacks of the TV. CHG lamp of the camera and the CHARGE lamps of the Cyber-shot Station light up. A/V connecting cable Battery level: LOW Battery level: MIDDLE If your TV provides stereo input jacks, co
Resumen del contenido incluido en la página 10
Taking time-lapse photos by Interval Shooting images Shot 3 Set shooting interval using the interval By connecting the Cyber-shot Station to a TV, selector of the Cyber-shot Station. you can shoot an image while checking it on You can choose the shooting interval from the big screen. 5 minutes, 30 minutes or 60 minutes. 1 Set the mode dial of the camera to the position you desire and turn on the camera. For further details, see the operating instructions supplied with the camera. 4 Press the INT
Resumen del contenido incluido en la página 11
4 Display a still image you want to print Printing still images using b/B. 5 Press PRINT button. Even if you do not have a computer, you can The print setting screen appears. easily print still images by connecting your camera directly or via Cyber-shot Station to a PictBridge compliant printer. • Refer to the operating instructions supplied with the camera for details on the printer settings, such as number of printing images, – Setting items that the printer does not paper size and USB setting
Resumen del contenido incluido en la página 12
Replacing the button type lithium Connecting the camera battery * Do not use any batteries other than to your computer via CR2025. the Cyber-shot Station 1 Pull out the battery holder while pushing the tab on the holder. 1 Connect the Cyber-shot Station to your computer by the USB cable supplied with the Cyber-shot Station. 2 Take out the button type lithium battery from the holder. 4 2 Turn on the camera. The USB connection between the camera 3 Put a new battery into the holder with and your co
Resumen del contenido incluido en la página 13
Troubleshooting If you have trouble with your camera, try the following solutions. If the trouble persists, contact your Sony dealer. Symptom Cause/Solution • The camera is turned on. Unable to charge the battery pack t Turn the camera off. • The AC adaptor is disconnected. t Properly connect the AC adaptor. • The camera is not placed on the Cyber-shot Station correctly. t Place the camera correctly. • The battery pack is not installed correctly. t Install the battery pack correctly. • The batte
Resumen del contenido incluido en la página 14
Symptom Cause/Solution • The printer may not be PictBridge-compliant. The connection between the printer t Ask the printer manufacturer whether your and the Cyber-shot Station cannot be printer is PictBridge-compliant. established • The printer is not set for the connection with the camera. t Be sure that the printer is on to connect with the camera. • The Cyber-shot Station is not connected to the Unable to print images printer properly. t Check that the Cyber-shot Station and the printer are p
Resumen del contenido incluido en la página 15
Included items Specifications • Cyber-shot Station (CSS-PHB) (1) Cyber-shot Station • Wireless Remote Commander (RMT-CSS2) Input/Output connectors (A button type lithium battery installed) A/V OUT (MONO) jack (Monaural) (1) Minijack • A/V connecting cable (1) Video*:1 Vp-p, 75 Ω , unbalanced, sync negative • USB cable (1) Audio*: 327 mV (47 kΩ loaded) • AC adaptor (AC-LS5) (1) Output impedance: 2.2 kΩ • AC Power cord (mains lead) (1) * When the DSC-P200 is connected. USB jack: mini-B • Set of pr
Resumen del contenido incluido en la página 16
Français Avant d’utiliser cet appareil, lisez attentivement ce mode d’emploi et conservez-le pour toute référence ultérieure. AVERTISSEMENT Pour ne pas risquer un incendie ou une décharge électrique, n’exposez pas cet appareil à la pluie ou à l’humidité. Note pour les clients européens Ce produit a fait l’objet d’essais ayant permis de constater qu’il respectait les limites prescrites par la directive sur la CEM sur l’utilisation de câbles de raccordement de moins de 3 mètres (9,8 pieds). Att
Resumen del contenido incluido en la página 17
Caractéristiques Le CSS-PHB peut être utilisé avec l’appareil photo numérique DSC-P200. Si vous placez un appareil photo numérique (appelé ci-après « appareil photo ») sur la Cyber-shot Station, vous pouvez utiliser celle-ci de la manière suivante. zVous pouvez facilement visualiser les images sur l’écran d’un téléviseur via la télécommande. La télécommande permet d’effectuer les opérations suivantes : – Visualisation d’images – Diaporama – Zoom de lecture – Prises de vues zLorsque le CSS-PHB es
Resumen del contenido incluido en la página 18
Index Précautions .......................................................................................................................... 5 Avant d’utiliser la Cyber-shot Station ............................................................................. 5 Identification des différents éléments .............................................................................. 6 Installation .........................................................................................................
Resumen del contenido incluido en la página 19
Précautions • La Cyber-shot Station ne doit pas être soumise à la poussière, à l’humidité et à l’eau. • N’utilisez pas et ne rangez pas la Cyber-shot Station dans les endroits suivants : – Endroits soumis à des températures extrêmes La température à l’intérieur d’une voiture fermée pendant l’été peut être très élevée et risque de déformer la Cyber-shot Station ou d’entraîner un problème de fonctionnement. – Endroits soumis à la lumière directe du soleil ou près de radiateurs Cela risque de défor
Resumen del contenido incluido en la página 20
Identification des différents éléments Cyber-shot Station Capteur à distance Touche INTERVAL SHOT Multi- Sélecteur connecteur d’intervalles Témoin Interval Shot Témoins CHARGE Prise A/V Témoin POWER OUT (MONO) Prise (USB) Capteur à distance Prise DC IN Télécommande Touche SHUTTER Touche POWER Touche PRINT Touche de Zoom (W/T) Touches de commande (v/V/b/B/ ) Touche MENU Touche (activation/désactivation de l’affichage / écran LCD) Les fonctions des touches de la télécommande sont les mêmes que
