Resumen del contenido incluido en la página 1
Speco Technologies IP Camera User’s Manual
IP Camera User’s Manual
(Version 1.3.2)
IP-INTB1 & IP-INTB2 & IP-WDRB1
Network Bullet Cameras
IP-INTD3 & IP-INTD4
Network Dome Cameras
IP-INTT5 & IP-T5
Network Traditional Cameras
IP-SD10X
Speed Dome Camera
1
Resumen del contenido incluido en la página 2
Speco Technologies IP Camera User’s Manual Introduction We appreciate your purchasing our IP Network Camera. This is a Network Camera with a built-in MPEG-4 CODEC and Streaming Server. It uses an MPEG-4 CODEC as the Video Compression method and has a built-in Streaming Server which allows you to monitor and record real time images in remote places over the Internet. Our IP cameras support both Static IP and Dynamic IP addresses and can change their Communication Ports, allowing seve
Resumen del contenido incluido en la página 3
Speco Technologies IP Camera User’s Manual Important Notes The Network Camera may be damaged by electrical and physical shock Do not try to disassemble the products. Contact or consult the distributor or Head Office for after sale service. There may be no Quality Assurance for the products disassembled arbitrarily. Do not use these products to be connected with life related device like medical apparatus. Do not touch the front lens of the camera. It is one of the mos
Resumen del contenido incluido en la página 4
Speco Technologies IP Camera User’s Manual Contents 1. FEATURE............................................................................ 8 1.1. PACKAGE ............................................................................................................ 8 1.2. DIMENSION AND CAMERA FEATURES................................................................... 9 1.2.1. Dimensions ..........................................................................................................
Resumen del contenido incluido en la página 5
Speco Technologies IP Camera User’s Manual 4.2. NETWORK SETTING ........................................................................................... 37 4.3. VIDEO SETTING ................................................................................................. 38 4.3.1. Video Setting ............................................................................................................................. 38 4.4. COLOR SETTING ..............................................
Resumen del contenido incluido en la página 6
Speco Technologies IP Camera User’s Manual 5.3. USE OF IP SETTING UTILITY.............................................................................. 99 5.4. USE OF SERVICE SERVER................................................................................ 101 5.4.1. User Registration .................................................................................................................... 102 5.4.2. Camera Registration........................................................
Resumen del contenido incluido en la página 7
Speco Technologies IP Camera User’s Manual 1. Feature 7
Resumen del contenido incluido en la página 8
Speco Technologies IP Camera User’s Manual 1. Feature 1.1. Package Software CD IP/Network Camera Quick Install Guide Cross LAN Cable Accessory Pack Power Lead Cable Package of Products is composed of main body of product, Software CD (NVR Program, IP Utility, Product Manual, NVR Manual) , Quick Install Guide, Cross LAN Cable, Accessory Pack, Power Lead Cable. Please check before starting installation. 8
Resumen del contenido incluido en la página 9
Speco Technologies IP Camera User’s Manual 1.2. Dimension and Camera Features 1.2.1. Dimensions 1) Bullet Camera ① ② ③ 2) Dome Camera ① ② ③ 9
Resumen del contenido incluido en la página 10
Speco Technologies IP Camera User’s Manual 3) Traditional Camera ② ① ③ 3) Speed Dome Camera ① ② ③ 1) Power Port: Power connection port (12 VDC) 2) VIDEO Port : Video Output Port (BNC) 3) LAN Port: LAN Connection Port ( Connect with LAN Cable for Local Network or Internet Viewing) LINK: LED On (When the product connects with LAN Cable) DATA: LED On (When user connects the product to the Network) 10
Resumen del contenido incluido en la página 11
Speco Technologies IP Camera User’s Manual 1.2.2. Camera Feature I. Intensifier Cameras (Not available with IP-T5) 1) SLC ( Speco Light Compensation ) : When the image is in front of strong background lighting, your camera allows you to get a clear image. 2) Intensifier: 1/3 inch double density CCD and digital processor permit high quality pictures to be captured in very low light conditions. 3) High Resolution: The horizontal resolution of 540TV lines is achieved by using a
Resumen del contenido incluido en la página 12
Speco Technologies IP Camera User’s Manual 16) Camera OSD control with client program 17) Super Day/Night Function with Power Sensor-up engine 18) Intelligent Pan/Tilt Controlling 19) High-frame rate of up to 30fps at 704x480 size image 20) 4 selectable image sizes – D1,Half D1,2CIF,CIF 21) Simultaneous access up to 20 users 22) Intelligent motion detection and alarm trigger function 23) Pre-alarm recording with ftp server 24) Networking security : Password protection & Encryption 25
Resumen del contenido incluido en la página 13
Speco Technologies IP Camera User’s Manual 2. Install and Check Video 13
Resumen del contenido incluido en la página 14
Speco Technologies IP Camera User’s Manual 2. Install and Check Video 2.1. Installation 1) Connect the IP Camera to the PC by LAN cable (Crossover Cable) 2) Supply power to the camera using a 12 volt DC regulated power supply. 3) Wait approximately 2 minutes until the Link/LED light comes on. 2.2. Video Check Basic network setting value of the camera is to be: IP Address: 192.168.1.7 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 To connect THE CAMERA into the user’s PC,
Resumen del contenido incluido en la página 15
Speco Technologies IP Camera User’s Manual 1) Set IP Address, Subnet Mask and Gate-way of User’s PC with 192.168.1.50, 255.255.255.0 and 192.168.1.1 as shown on [Fig. 2-1]. Fig. 2―2 Web Browser Input 2) Run Web Browser as [2-2] and input 192.168.1.7 in URL and click “Enter”, then [2-3] is shown. In case [2-3] does not appear, re-set Hardware (Reset Button in Camera) to reboot and run Web Browser, input 192.168.1.7 in URL line and click “Enter” . Fig. 2―3 THE CAMERA Main Page 3)
Resumen del contenido incluido en la página 16
Speco Technologies IP Camera User’s Manual (1) Fig. 2―4 User login 4) Input ID and Password on [Fig. 2-4] to see Video. 5) User’s Authority to see Video on THE CAMERA is as follows ; Table 2-1 User ID, Password, Rights User ID User Password Rights Guest Guest Monitor only PTZ (select models only) PTZ Monitor, Control of P/T/Z, Control of Relay Audio (select models only) Audio Monitor, Hearing Iaudio (select models only) Iaudio Monitor, Bi-directional Audio PCAudio (select mod
Resumen del contenido incluido en la página 17
Speco Technologies IP Camera User’s Manual Fig. 2―5 ActiveX Download 9) Upon installation, Web Viewer [Fig. 2-6] appears and the image of the Camera can be seen. Fig. 2―6 Web Viewer 10) After checking proper operation as seen on [Pic 2-6], go onto the next Chapter (3) Basic Setting. 11) Refer to (5) Basic Use’ to see the details of how to use Web Viewer. 17
Resumen del contenido incluido en la página 18
Speco Technologies IP Camera User’s Manual 3. Basic Setting 18
Resumen del contenido incluido en la página 19
Speco Technologies IP Camera User’s Manual 3. Basic Setting 3.1. Check Network and Installation Type This Chapter is for basic setting of THE CAMERA. To install Hardware of the Network Camera, basic understanding of Networking is required. Please refer to Chapter 6 in case knowledge of Network Environment is required. There are 2 ways to install Hardware. One is to install THE CAMERA without IP sharing Device under Cable Modem or Leased Line, the other one is to install THE CAMERA unde
Resumen del contenido incluido en la página 20
Speco Technologies IP Camera User’s Manual 3.2. Installation without IP sharing device (Router) 3.2.1. Static IP Setup 1) After checking Video in ‘Video Check’, go to the next step. 2) Connect THE CAMERA to PC with LAN Cable (Crossover Cable). 3) Cable connection and Network Setup should be same as shown in ‘2. Install and Video Check’. 4) Run Web Browser and input 192.168.1.7 in URL and click ‘Enter’, then [Fig. 3-1] will appear. Fig. 3―1 Main Page of THE CAMERA Network
