Manual de instrucciones de SECO-LARM USA 84-IR LED Bullet Cameras EV-1826-NKGQ

Resumen del contenido incluido en la página 1

EV-1826-NKGQ (NTSC)
EV-1826-PKGQ (PAL)
84-IR LED Bullet Cameras

Manual




1
 /3” Sony Super HAD II CCD
Zeta Series Model No.
 2.8~12mm Varifocal lens
EV-18C
OSD Controller
 Weatherproof (IP66)
 OSD functions accessible with
Use to access the OSD
optional OSD controller (EV-18C)
(On-Screen Display)
 Optimized to produce clear
functions for
images at night
compatible cameras
 Cables concealed in bracket
without having to be
 12VDC operation
near

Resumen del contenido incluido en la página 2

ENFORCER 84-IR LED Bullet Cameras Specifications: Model # EV-1826-NKGQ EV-1826-PKGQ Type IR LED Bullet Camera 1 CCD /3” Sony Super HAD II # of infrared LEDs 84 Lens 2.8~12mm Resolution 600 TV lines 600 TV Lines Pickup elements 768x494 pixels 752x582 pixels Sync Internal Video output 1.0Vp-p Composite video, 75Ω Video output format NTSC PAL LEDs OFF 0.1 Lux Minimum illumination LEDs ON 0 Lux Gamma correction 0.45 S/N ratio >45dB Shutter control Auto Electric Shutter (AE

Resumen del contenido incluido en la página 3

ENFORCER 84-IR LED Bullet Cameras Dimensions: 5 4 /8” 5 (118mm) 4 / ” 16 (109mm) 1 10 /4” (260mm) 13 10 / ” (275mm) 16 5 4 / ” (116mm) 8 Overview: Mounting base Sunshield Sunshield Surface mount screw Female BNC connector Mounting arm knock-out adjustment screw Remove with a pair of pliers DC Plug with terminal block Camera angle Mounting Adjustment DC jack adjustment screw arm screw Zoom Focus Adjustment nut Before Starting: 1. Please read this

Resumen del contenido incluido en la página 4

ENFORCER 84-IR LED Bullet Cameras Troub leshooting:  Check that the camera is powered up.  Check that the power supply’s polarity is correct. The screen is blank.  Check that the monitor is powered up.  Check that the video cable connecting the camera to the monitor is connected properly.  Clean the lens using a soft, clean, dry, and lint-free cloth. The screen image is dim.  Check that the light source is adequate.  Adjust the monitor’s contrast knob. The screen image ha