Resumen del contenido incluido en la página 1
VideoJetX10
Network Video Server
en Installation and Operating Manual
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
VideoJet X10 Table of Contents | en 3 Table of Contents 1Preface 7 1.1 About this Manual 7 1.2 Conventions in this Manual 7 1.3 Intended Use 7 1.4 EU Directives 8 1.5 Rating Plate 8 2 Safety Information 9 2.1 Electric Shock Hazard 9 2.2 Installation and Operation 9 2.3 Maintenance and Repair 9 3 Product Description 11 3.1 Scope of Delivery 11 3.2 System Requirements 12 3.3 Overview of Functions 13 3.4 Connections on the Front Panel 16 3.5 Connections on the Rear Panel 17 4 Installation 19 4.1 Pr
Resumen del contenido incluido en la página 4
4 en | Table of Contents VideoJet X10 5.19 Recording Profiles 57 5.20 Recording Scheduler 59 5.21 Alarm Sources 61 5.22 Alarm Connections 62 5.23 VCA 65 5.24 Alarm E-Mail 70 5.25 Alarm Task Editor 72 5.26 Relay Settings 73 5.27 COM1 75 5.28 Network 77 5.29 Multicasting 81 5.30 Encryption 83 5.31 Version Information 85 5.32 Livepage Configuration 86 5.33 System State 89 5.34 Licenses 90 5.35 Maintenance 91 5.36 Function Test 93 6Operation 95 6.1 Operation with Microsoft Internet Explorer 95 6.2 T
Resumen del contenido incluido en la página 5
VideoJet X10 Table of Contents | en 5 10 Specifications 125 10.1 Unit 125 10.2 Protocols/Standards 126 11 Index 127 Bosch Security Systems Installation and Operating Manual V3.0 | 2007.09
Resumen del contenido incluido en la página 6
6 en | Table of Contents VideoJet X10 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems
Resumen del contenido incluido en la página 7
VideoJet X10 Preface | en 7 1Preface 1.1 About this Manual This manual is intended for persons responsible for the installation and operation of the VideoJet X10. International, national and any regional electrical engineering regulations must be followed at all times. Relevant knowledge of network technology is required. The manual describes the installation and operation of the unit. 1.2 Conventions in this Manual In this manual, the following symbols and notations are used to draw attentio
Resumen del contenido incluido en la página 8
8 en | Preface VideoJet X10 1.4 EU Directives The VideoJet X10 network video server complies with the requirements of EU Directives 89/ 336 (Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive). 1.5 Rating Plate For exact identification, the model name and serial number are inscribed on the bottom of the housing. Please make a note of this information before installation if necessary so as to have it to hand in case of questions or when ordering spare parts. V3.0
Resumen del contenido incluido en la página 9
VideoJet X10 Safety Information | en 9 2Safety Information 2.1 Electric Shock Hazard – Never attempt to connect the unit to any power network other than the type for which it is intended. – Use only power supply units with UL approval and a power output according to LPS or NEC Class 2. – Never open the housing. – Never open the housing of the power supply unit. – If a fault occurs, disconnect the power supply unit from the power supply and from all other units. – Install the power supply and
Resumen del contenido incluido en la página 10
10 en | Safety Information VideoJet X10 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems
Resumen del contenido incluido en la página 11
VideoJet X10 Product Description | en 11 3 Product Description 3.1 Scope of Delivery – VideoJet X10 network video server (with or without integrated hard drive) –4 terminal blocks – Drilling template – Quick Installation Guide – Product CD with the following content: – Quick Installation Guide –Manual – System Requirements document – Further documentation on Bosch Security Systems products – Configuration Manager –MPEG ActiveX control – Player and Archive Player –DirectX control – Microsoft Inte
Resumen del contenido incluido en la página 12
12 en | Product Description VideoJet X10 3.2 System Requirements 3.2.1 General Requirements – Computer with Windows 2000 or Windows XP operating system – Network access (Intranet or Internet) – Screen resolution 1,024 × 768 pixels – 16- or 32-bit color depth – Installed Sun JVM NOTICE! Also note the information in the System Requirements document on the product CD supplied. If necessary, you can install the required programs and controls from the product i CD supplied (see Section 3.1 Scope o
Resumen del contenido incluido en la página 13
VideoJet X10 Product Description | en 13 3.3 Overview of Functions 3.3.1 Network Video Server The VideoJet X10 is a compact network video server for a connected video source. It is primarily designed for encoding video, audio and control data for transfer over an IP network. With its encoding in the MPEG-4 format, the VideoJet X10 is ideally suited for making existing analog CCTV cameras IP-compatible and for remote access to digital VCRs and multiplexers. The use of existing networks means t
Resumen del contenido incluido en la página 14
14 en | Product Description VideoJet X10 3.3.7 Remote Control For remote control of external units such as pan or tilt heads for cameras or motorized zoom lenses, control data is transmitted via the VideoJet X10's bidirectional serial interface. This interface can also be used to transmit transparent data. 3.3.8 Tamper Detection and Motion Detectors The VideoJet X10 offers a wide range of configuration options for alarm signaling in the event of tampering with the connected camera. An algorit
Resumen del contenido incluido en la página 15
VideoJet X10 Product Description | en 15 3.3.13 Summary The VideoJet X10 offers the following main functions: – Video and data transmission over IP data networks – Dual Streaming function for the encoder for simultaneous encoding with two individually definable profiles – Multicast function for simultaneous image transmission to multiple receivers – One analog BNC composite video input (PAL/NTSC) – Video encoding to international standard MPEG-4 – Two redundant integrated Ethernet ports (10/100
Resumen del contenido incluido en la página 16
16 en | Product Description VideoJet X10 3.4 Connections on the Front Panel 1 USB 1/2 interfaces for future expansion of functions 2VideoIn video input BNC socket for connecting the video source 3 Audio In audio line input 3.5 mm stereo socket for connecting an audio line input signal 4 Audio Out audio line output 3.5 mm stereo socket for connecting an audio line output signal 5 Connect LED flashes green when the unit is connected to a video 6 HDD LED flashes orange when hard drive activity is d
Resumen del contenido incluido en la página 17
VideoJet X10 Product Description | en 17 3.5 Connections on the Rear Panel 7ETH1 RJ45 socket for connecting to an Ethernet LAN (local network), 10/100 MBit Base-T 8ETH1 LED lights up yellow when the unit is connected to the network via ETH 1 9ETH2 RJ45 socket for a redundant connection to the network or to an iSCSI system 10 ETH 2 LED lights up yellow when the unit is connected to the network via ETH 2 11 Terminal block for alarm inputs, relay outputs, serial interface and power supply 12 Power
Resumen del contenido incluido en la página 18
18 en | Product Description VideoJet X10 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems
Resumen del contenido incluido en la página 19
VideoJet X10 Installation | en 19 4 Installation 4.1 Preparations The VideoJet X10 features industrial standard equipment and is therefore suitable for both stationary installation and mobile installation in vehicles. CAUTION! The unit is intended for use indoors or in housings. Select a suitable location for installation that guarantees to meet the environmental conditions. The ambient temperature must be between –30 and +60 °C (–22 and +140 °F). The relative humidity must not exceed 95%. !
Resumen del contenido incluido en la página 20
20 en | Installation VideoJet X10 4.3 Connections 4.3.1 Camera You can connect a video source to the VideoJet X10. Any cameras and other video sources that produce a standard PAL or NTSC signal are suitable. 1. Connect the camera or another video source to the BNC Video In socket using a video cable (75 Ohm, BNC plug). 2. If the video signal is not looped through, termination is performed by a software setting if necessary (see Abschnitt 5.13 Video Input, Seite 43). 4.3.2 Audio Connections Th
