Resumen del contenido incluido en la página 1
10x Zoom 802.11b/g/n Wifi PoE PZ8111/PZ8111W/PZ8121/PZ8121W
Rev. 1.1a
IP Surveillance
Resumen del contenido incluido en la página 2
VIVOTEK Table of Contents Overview 3 Read Before Use .....................................................................................................................................3 Package Contents .....................................................
Resumen del contenido incluido en la página 3
VIVOTEK Revision History • Rev. 1.0: Initial release. • Rev. 1.1: Added WPS description. • Rev. 1.1a: Removed 3-axis PTZ movement commands. Overview VIVOTEK PZ8111/21(PoE), PZ8111W/21W(WLAN) is a high-performance network camera featuring 10x optical zoom and pan/tilt functionality. The camera is designed for indoor surveillance applications such as retail stores, offices or banks. The built-in 10x motorized optical zoom module provides greater depth of field when zoomed in. Therefore, it
Resumen del contenido incluido en la página 4
VIVOTEK Physical Description Front panel Lens Built-in Microphone Status LED (hidden within the plastic Power/MIC Activity shield) Rear panel Antenna (PZ8111W / PZ8121W only) Power Cord Socket AV Recessed Reset Button e e Ethernet 10/100 External/Internal RJ45 Socket Microphone Switch Microphone input General I/O Terminal Block General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions a
Resumen del contenido incluido en la página 5
VIVOTEK DI/DO Diagram Please refer to the following illustration for the connection method. 12V PIN 1 Power+12V PIN 2 Digital output +12V PIN 3 Digital input PIN 4 Ground Status LED The color of LED indicates the status of the Network Camera. Status LED Color Description Blinking red Power is being supplied to the Network Camera. Solid green The Network Camera is booting up. Steady green with blinking red The Network Camera is trying to obtain an IP address. Steady green and red An IP address
Resumen del contenido incluido en la página 6
VIVOTEK Hardware Reset AV e e The reset button is used to reset the system or restore the factory default settings. Sometimes resetting the system can return the camera to normal operation. If the system problems remain after rebooting, restore the factory settings and install again. Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the Network Camera to reboot. Restore: Press and hold the recessed reset button until the status LED rapidly blinks re
Resumen del contenido incluido en la página 7
Power/MIC Activity VIVOTEK Installation Hardware Installation Follow the steps below to install the Network Camera to the ceiling: 1. Attach ceiling mount bracket A to the Network Camera and secure it with two small screws. 2. Drill three pilot holes into the ceiling; hammer the plastic anchors into the holes. 3. Fasten ceiling mount bracket B to the ceiling with three screws. 4. Slide the Network Camera into ceiling mount bracket B. 5. Secure the ceiling mount bracket A and B with a small scr
Resumen del contenido incluido en la página 8
Power/MIC Activity PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 RE LC INEKIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment Setup the Network Camera over the Internet This section explains how to configure the Network Camera over an Internet connection. 1. If you have external devices such as sensors and alarms, connect them to the general I/O terminal block. 2. Connect the camera to a switch via Ethernet cable. 3. Connect the supplied power cable from the Network Camera
Resumen del contenido incluido en la página 9
VIVOTEK 2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168.0.3, please forward the following ports for the Network Camera on the router. ■ HTTP port ■ RTSP port ■ RTP port for audio ■ RTCP port for audio ■ RTP port for video ■ RTCP port for video If you have changed the port numbers on the Network page, please open the ports accordingly on your router. For information on how to forward ports on the router, please refer to your router’s user’s m
Resumen del contenido incluido en la página 10
PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Set up the Network Camera through Power over Ethernet (PoE) (PZ8111 & 8121 only) When using a PoE-enabled switch The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet cable. If your switch/router supports PoE, refer to the following illustration to connect the Network Camera to a PoE-enabled switch/router. power + data transmission e e PoE Switch When
Resumen del contenido incluido en la página 11
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN. 1. Install IW2 from the Software Utility directory on the software CD. Double click the IW2 shortcut on your desktop to launch the program. 2. The program will conduct an analysis of your network environment. After your network environment is analyzed, please click Next to continue the program. 3. The program will search for al
Resumen del contenido incluido en la página 12
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software. Using Web Browsers Use Installation Wizard 2 (IW2) to access to the Network Cameras installed on the LAN. If your network environment is not the LAN, follow these steps to access the Network Camera: ® 1. Launch your web browser (e.g., Microsoft Internet Explorer or Mozilla Firefox). 2. Enter the IP add
Resumen del contenido incluido en la página 13
VIVOTEK ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera. For more information about how to enable password protection, please refer to Security on page 26. ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable the ActiveX Controls for your browser. 1. Choose Tools > Internet Options > Security > Custom Level. ® 2.
Resumen del contenido incluido en la página 14
VIVOTEK Using RTSP Players To view the MPEG-4 streaming media using RTSP players, you can use one of the following applications that support RTSP streaming. Quick Time Player Real Player VLC media player 1. Launch the RTSP player. mpegable Player 2. Choose File > Open URL. A URL dialog box will pop up. 3. The address format is rtsp://:/ As
Resumen del contenido incluido en la página 15
VIVOTEK Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet. For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8. To utilize this feature, please check the following settings on your Network Camera: 1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
Resumen del contenido incluido en la página 16
VIVOTEK Using VIVOTEK Recording Software The product software CD also contains VIVOTEK’s recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras. Please install the recording software, then launch the program to add the Network Camera to the Channel list. For detailed information about how to use the recording software, please refer to the user’s manual of the software or download the manual from http://www.vivotek.com. 16 - User's Manual
Resumen del contenido incluido en la página 17
VIVOTEK Main Page This chapter explains the layout of the main page. It is composed of the following sections: VIVOTEK INC. Logo, Host Name, Camera Control Area, PTZ Control Panel, Configuration Area, and Live video window. VIVOTEK INC. Logo Host Name Camera Control Area PTZ Control Panel Live View Window Configuration Area VIVOTEK INC. Logo Click this logo to visit the VIVOTEK website. Host Name The host name can be customized to fit your needs. For more information, please refer to System
Resumen del contenido incluido en la página 18
VIVOTEK Pan: Click this button to start the auto pan. When the current position is Home or on the left side of Home, the camera starts panning from the current position to the left-most position, then to the right- most position, and finally backward to the original position. When the current position is on the right side of Home, the camera starts panning from the current position to the right-most position, then to the left- most position, and finally backward to the original position. Sto
Resumen del contenido incluido en la página 19
VIVOTEK Video Title: The video title can be configured. For more information, please refer to Video Settings on page 59. MPEG-4 Protocol and Media Options: The transmission protocol and media options for MPEG-4 video streaming. For further configuration, please refer to Client Settings on page 21. Time: Display the current time. For further configuration, please refer to Video Settings on page 59. Title and Time: The video title and time can be stamped on the streaming video. For further con
Resumen del contenido incluido en la página 20
VIVOTEK Go to: Once the Administrator has configured a list of preset positions, you can quickly move the camera’s view to a preset position using using this command. For more information, please refer to Camera Control on page 69. ■ The following window is displayed when the video mode is set to MJPEG: Video Title Time Video 10:17:38 2011/12/14 Title and Time Drop-down List of Preset Positions Video Control Buttons Video Title: The video title can be configured. For more information, pleas
