Resumen del contenido incluido en la página 1
Pan/Tilt Dome
PD8136 Network Camera
User’s Manual
1MP • Pan/Tilt • PoE
Rev. 1.0
Resumen del contenido incluido en la página 2
VIVOTEK Table of Contents Overview4 Read Before Use .............................................................................................................................................5 Package Contents ......................................
Resumen del contenido incluido en la página 3
VIVOTEK URL Commands for the Network Camera .......................................................................................................... 110 Technical Specifications ..................................................................................................................................... 112 Technology License Notice ................................................................................................................................. 113 Electromagnetic Comp
Resumen del contenido incluido en la página 4
VIVOTEK Overview VIVOTEK PD8136 is equipped with a 1MP sensor enabling viewing resolution of 1280x800 at 30 fps. Users need look no further for an all-in-one camera capable of capturing high quality, high resolution video with pan & tilt control. With a stylish design and small footprint to fit most installation environments, it is the best choice for indoor surveillance applications such as retail stores, offices, or homes. With flexible 360-degree pan and 80-degree tilt, PD8136 gives use
Resumen del contenido incluido en la página 5
VIVOTEK Read Before Use The use of surveillance devices may be prohibited by law in your country. The Network Camera is not only a high-performance web-ready camera but can also be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use. It is important to first verify that all contents received are complete according to the Package Contents listed below. Take note of the
Resumen del contenido incluido en la página 6
VIVOTEK Physical Description Top View Built-in Microphone Status LED Lens Bottom View Ethernet 10/100 RJ45 cable MicroSD/SDHC Socket Reset Button 6 - User's Manual
Resumen del contenido incluido en la página 7
VIVOTEK LED Definitions Item LED Status Description 1 Steady Red Power on and system booting Red LED off Power off 2 Steady Red + blinking Green every 1 sec. (Green LED on Network heartbeat for 1 sec and off for another) Steady Red + Green LED off Network disconnected 3 Blinking Red every 0.15 sec. + Blinking Green every 1 sec. Upgrading firmware (Red LED on for 0.15 sec. and Green LED on for 1 sec. and off for another) 4 Blinking Red every 0.15 sec. + blinking Green every 0.15 Restoring d
Resumen del contenido incluido en la página 8
Cable hole VIVOTEK Installation Hardware Installation Mounting Plate and Camera Orientation When installing the camera, orient the default front on the mounting plate (illustrated below) towards the area of your interest. The camera lens' central position is aligned with the VIVOTEK logo on the dome cover. The Default Front The Default Front The Default Front Home Position Drill hole Drill hole Drill hole P/N : 62xxxxxxxx 0° 180° Pan 180° Pan Stop Point 8 - User's Manual
Resumen del contenido incluido en la página 9
VIVOTEK Install MicroSD Card Open the MicroSD card plastic cover at the bottom using a small flathead screwdriver. Flip the socket cover forward and up. Insert a MicroSD card, close the cover, and push it back to secure the installation. Install the plastic cover by pressing it back to its original position. icro M SD User's Manual - 9
Resumen del contenido incluido en la página 10
Cable hole VIVOTEK Mounting the Network Camera 1. Attach base plate "A" of the ceiling mount bracket to the bottom of camera and secure it with two small round head screws. Note that the guiding edge of the base plate (where a screw hole is available) must protrude from the edge of camera. 2. Use the included alignment sticker, orient the sticker toward the direction you prefer. 3. Drill three holes into the ceiling; hammer the plastic anchors into the holes. 4. Install ceiling mounting
Resumen del contenido incluido en la página 11
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment Setting up the Network Camera over the Internet There are several ways to set up the Network Camera over the Internet. The first way is to set up the Network Camera behind a router. The second way is to utilize a static IP. The third way is to use PPPoE. Internet connection via a router Before setting up the Network Camera over the Internet, make sure you have a router and follow the steps below. 1. Connect your Net
Resumen del contenido incluido en la página 12
PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Internet. Please refer to Network Type on page 51 for details. Internet connection with static IP Choose this connection type if you are required to use a static IP for the Network Camera. Please refer to LAN on page 51 for details. Internet connection via PPPoE (Point-to-Point over Ethernet) Choose this connection type if you are connected to the Internet via a DSL Line. Please refer
Resumen del contenido incluido en la página 13
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN. IW 2 1. Install IW2 under the Software Utility directory from the software CD. Installation Double click the IW2 shortcut on your desktop to launch the program. Wizard 2 2. The program will conduct an analysis of your network environment. After your network environment is analyzed, please click Next to continue the program. 3.
Resumen del contenido incluido en la página 14
VIVOTEK Ready to Use 1. A browser session with the Network Camera should prompt as shown below. 2. You should be able to see live video from your camera. You may also install the 32-channel recording software from the software CD in a deployment consisting of multiple cameras. For its installation details, please refer to its related documents. IMPORTANT: • Currently the Network Camera utilizes a 32-bit ActiveX plugin. You CAN NOT open a management/view session with the camera using a 64
Resumen del contenido incluido en la página 15
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software. Using Web Browsers Use Installation Wizard 2 (IW2) to access to the Network Cameras on the LAN. If your network environment is not a LAN, follow these steps to access the Netwotk Camera: ® 1. Launch your web browser (e.g., Microsoft Internet Explorer or Mozilla Firefox). 2. Enter the IP address of the
Resumen del contenido incluido en la página 16
VIVOTEK ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera. For more information about how to enable password protection, please refer to Security on page 68. ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable the ActiveX Controls for your browser. 1. Choose Tools > Internet Options > Security > Custom Level. ® 2. Loo
Resumen del contenido incluido en la página 17
VIVOTEK Using RTSP Players To view the H.264/MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming. Quick Time Player VLC Media Player VLC media player 1. Launch the RTSP player. 2. Choose File > Open URL. An URL dialog box will pop up. mpegable Player mpegable Player 3. The address format is rtsp://:/
Resumen del contenido incluido en la página 18
VIVOTEK Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet. For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 12. To utilize this feature, please check the following settings on your Network Camera: 1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
Resumen del contenido incluido en la página 19
VIVOTEK Using VIVOTEK Recording Software The product software CD also contains recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras. Please install the recording software; then launch the program to add the Network Camera to the Channel list. For detailed information about how to use the recording software, please refer to the user’s manual of the software or download it from http://www.vivotek.com. User's Manual - 19
Resumen del contenido incluido en la página 20
VIVOTEK Main Page This chapter explains the layout of the main page. It is composed of the following sections: VIVOTEK INC. Logo, Host Name, Camera Control Area, Configuration Area, and Live Video Window. VIVOTEK INC. Resize Buttons Host Name Logo Configuration Area Camera Control Area Hide Button Live View Window Mouse and Screen Control In addition to the use of a joystick, mouse control is also supported by the web session. You can click on any spot on the screen to move camera's fie
