Resumen del contenido incluido en la página 1
IP8335H
720p HD IR Illuminators WDR Pro
Rev. 1.0
IP Surveillance
Resumen del contenido incluido en la página 2
VIVOTEK Table of Contents Overview 4 Read Before Use ���������������������������������������������������������������������������������������������������������������������������������������������������� 5 Package Contents ����������������������
Resumen del contenido incluido en la página 3
VIVOTEK Day/Night Settings �������������������������������������������������������������������������������������������������������������������������������������������� 71 Preference ������������������������������������������������������������������������������������������������������������������������������������������������������� 72 Exposure �����������������������������������������������������������������������������������������������������������������������������������������
Resumen del contenido incluido en la página 4
VIVOTEK Overview VIVOTEK’s IP8335H network bullet camera features an HD WDR CMOS sensor for use in challenging lighting conditions� The resulting WDR Pro feature enables the camera to capture both the dark and bright parts of an image with double shutters, enabling two frames to be combined to generate a highly realistic image representative of the original scene, providing video quality close to the capabilities of the human eye� The P-iris lens controls the iris with extreme precision w
Resumen del contenido incluido en la página 5
VIVOTEK Read Before Use The use of surveillance devices may be prohibited by law in your country� The Network Camera is not only a high-performance web-ready camera but can also be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use� It is important to first verify that all contents received are complete according to the Package Contents listed below� Take note of th
Resumen del contenido incluido en la página 6
VIVOTEK Physical Description Light Sensor Lens IR LEDs Focus Controller Reset Button Zoom Controller General I/O Terminal Block Gb Ethernet Micro SD/SDHC RJ45 Plug Card Slot Power Cord Socket Alternate AC Power Source + AC 24V + - AC 24V - 6 - User's Manual
Resumen del contenido incluido en la página 7
VIVOTEK Hardware Installation 1 � Attach the alignment sticker to the wall� Drill three holes into the wall� Then hammer the supplied plastic anchors into the holes and secure the plate with supplied screws� 2. Feed the cables through the front opening of the wall mount bracket. (If you want to use external devices such as sensors and alarms, please refer to the assembling steps on the next page) � 3� Hang the wall mount bracket on the plate� 4. Fix the Network Camera on the wall mount brac
Resumen del contenido incluido en la página 8
VIVOTEK Waterproof Connector Components of the Waterproof Connector Rubber (A) Screw Nut (B) Seal (C) Seals (D) Housing (E) Sealing Nut (F) IO Block Pin Definitions The terminal block is accessible when the rear cover is opened� 1 2 3 4 5 6 7 8 Micro SD Socket J3 J7 PCB 1 2 3 4 5 6 7 8 Ethernet Power J3 J7 1 Digital Input 1: DI1 1 N/C 2 Digital Input: - (Ground) 2 N/C 3 RS485 + 3 DO- * 4 RS485 - 4 DO+ ** 5 AUDIO_GND 5 Digital Input: - (Ground) 6 AUDIO_IN: Ext_MIC_IN 6 Digital Input 3: DI3 7 A
Resumen del contenido incluido en la página 9
VIVOTEK Assembling Steps 1. Disassemble the components of the waterproof connector into part (A) ~ (F) as shown above. 2� Remove the rubber stopper from the bottom of the Network Camera and secure the rubber (A) and screw nut (B) tightly� 3� Open the back cover of the Network Camera� 4 � If you have external devices such as sensors and alarms, feed the cables through the waterproof connector (F --> E --> C --> A+B) as the illustration shown below. Then refer to the pin definition to connect
Resumen del contenido incluido en la página 10
VIVOTEK DI/DO Diagram Please refer to the following illustration for the connection method� 12V PIN 1 Power+12V PIN 2 Digital output +12V PIN 3 Digital input PIN 4 Ground Hardware Reset Reset Button The reset button is used to reset the system or restore the factory default settings Sometimes � resetting the system can return the camera to normal operation If � the system problems remain after reset, press the reset button longer to restore the factory settings and install again� Reset: Press
Resumen del contenido incluido en la página 11
PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment When using a PoE-enabled switch The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable. Follow the below illustration to connect the Network Camera to a PoE-enabled switch via Ethernet cable� RJ45 Female/ Female Coupler PoE Switch When using a non-PoE switch Use a PoE power injector (optional) to connect between the Net
Resumen del contenido incluido en la página 12
PARTITION RELC INEKVE I POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment Setting up the Network Camera over the Internet There are several ways to set up the Network Camera over the Internet� The first way is to set up the Network Camera behind a router � The second way is to utilize a static IP� The third way is to use PPPoE� Internet connection via a router Before enabling the access to the Network Camera over the Internet, make sure you have a router and follow the steps below� 1� Co
Resumen del contenido incluido en la página 13
VIVOTEK Internet connection with static IP Choose this connection type if you are required to use a static IP for the Network Camera� Please refer to LAN configuration on page 53 for details. Internet connection via PPPoE (Point-to-Point over Ethernet) Choose this connection type if you are connected to the Internet via a DSL Line Please refer to � PPPoE on page 54 for details� User's Manual - 13
Resumen del contenido incluido en la página 14
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN� IW 1� Install IW2 under the Software Utility directory from the software CD� 2 Double click the IW2 shortcut on your desktop to launch the program� Installation Wizard 2 2� The program will conduct an analysis of your network environment� After your network environment is analyzed, please click Next to continue the program� 3� T
Resumen del contenido incluido en la página 15
VIVOTEK Ready to Use 1� A browser session with the Network Camera should prompt as shown below � 2 � You should be able to see live video from your camera� You may also install the 32-channel recording software from the software CD in a deployment consisting of multiple cameras. For its installation details, please refer to its related documents� 3� Unscrew the zoom controller to adjust the zoom factor� Upon completion, tighten the zoom controller� 4� Unscrew the focus controller to adjust
Resumen del contenido incluido en la página 16
VIVOTEK 5� Tighten the lens cover � 6� Replace the moisture absorber with a new one if you open the back cover during the installation procedure� 6 IMPORTANT! 5 Please tear down the aluminum foil vacuum bag and take out the moisture absorber, and then replace it with the absorber in kit using a double-sided tape� NOTE: If you want to use the supplied sun shield for outdoor environments, please follow the steps below to install: 1 � Tighten the supplied two screws� 2� Attach the suppli
Resumen del contenido incluido en la página 17
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using Web Browsers Use Installation Wizard 2 (IW2) to access the Network Cameras on the LAN� If your network environment is not a LAN, follow these steps to access the Network Camera: ® 1 Launch your web browser (ex � � Microsoft Internet Explorer or Mozilla Firefox). 2. Enter the IP address of the Net
Resumen del contenido incluido en la página 18
VIVOTEK NOTE: 1� By default, your Network Camera is not password-protected� To prevent unauthorized access, it is highly recommended to configure a password for your camera later. For more information about how to enable password protection, please refer to Security on page 42� 2� If you see a dialogue box indicating that your security settings prohibit running ActiveX Controls®, please enable ActiveX Controls for your browser� ® To enable the ActiveX Controls for your browser: 1� Choo
Resumen del contenido incluido en la página 19
VIVOTEK IMPORTANT! Currently the Network Camera utilizes 32-bit ActiveX plugin� You CAN NOT open a • management/view session with the camera using a 64-bit IE browser� If you encounter this problem, try execute the Iexplore� exe program from C:\ • Windows\SysWOW64� A 32-bit version of IE browser will be installed � On Windows 7, the 32-bit explorer browser can be accessed from here: • C:\Program Files (x86)\Internet Explorer\iexplore.exe User's Manual - 19
Resumen del contenido incluido en la página 20
VIVOTEK Using RTSP Players To view the H�264/MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming� Quick Time Player Real Player 1� Launch the RTSP player � 2. Choose File > Open URL. A URL dialog box will prompt. 3� The address format is rtsp://:/ As most ISPs and players only allow RTSP streaming through port number 554, please set the
