Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
VIVOTEK Table of Contents Overview3 Read Before Use �������������������������������������������������������������������������������������������������������������������������������������3 Package Contents �����������������������������������������������������
Resumen del contenido incluido en la página 3
VIVOTEK Overview VIVOTEK IP7361 is a high-end 2-megapixel network bullet camera surveillance. outdoor-specific features such as concealed wiring to prevent tampering, the IP7361 is the camera of choice for applications such as parking lots, gas stations, and building entrances� The IP7361 boasts high-definition 2-megapixel (1600 x 1200) resolution, allowing for the delivery of extremely detailed images and coverage 6 times larger than a VGA camera. To maximize the benefit of the 2-megapix
Resumen del contenido incluido en la página 4
VIVOTEK Physical Description Lens IR LED Light Sensor SD/SDHC Card Slot General I/O Reset Button Terminal Block Status LED Power Cord Socket RJ45 Cable General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below. Pin Name 1 Power +12V 2 Digital Output 3 Digital Input 4 Ground 5 AC 24V Input 1 2 3 4 5 6 7 8 6 AC 24V Input 7 RS-485 + 8 RS-485 - Pin Name 1 External MIC In
Resumen del contenido incluido en la página 5
VIVOTEK DI/DO Diagram Please refer to the following illustration for the connection method� 12V PIN 1 Power+12V PIN 2 Digital output +12V PIN 3 Digital input PIN 4 Ground Status LED The LED indicates the status of the Network Camera� Item LED status Description Steady Red Power on and system booting 1 Red LED unlighted Power off Steady Red + Blink Green every 1 sec� Network works (heartbeat) 2 Steady Red + Green LED unlighted Network fail 3 Steady Red + Blink Green every 2 sec� Audio mute (he
Resumen del contenido incluido en la página 6
VIVOTEK Hardware Reset Reset Button Status LED The reset button is used to reset the system or restore the factory default settings� Sometimes resetting the system can return the camera to normal operation If � the system problems remain after reset, restore the factory settings and install again� Reset: Press and release the recessed reset button with a paper clip or thin object� Wait for the Network Camera to reboot� Restore: Press and hold the recessed reset button until the status LED
Resumen del contenido incluido en la página 7
VIVOTEK Cabling Assembly RJ45 Cable Connector Components of the Waterproof RJ45 Cable Dimension (unit: mm) Connector Sealing Nut (A) Seal (B) Screw Nut (C) Housing (D) Gasket (E) Assembling Steps 2 3 1 Insert the housing into the Insert the seal into the housing� Prepare an Ethernet cable screw nut� and strip part of the sheath� (C) (D) (B) Recommended cable gauge: 24AWG (0�51 mm) Insert the stripped Ethernet 4 5 6 Push the RJ45 plug into the Clamp the cable with cable through the seali
Resumen del contenido incluido en la página 8
VIVOTEK Hardware Installation 1� Attach the alignment sticker to the wall� Drill four holes into the wall� Then hammer the supplied plastic anchors into the holes and secure the plate with supplied screws� ㄇ 2� Fix the -bracket to the side of the Network Camera with two screws� 3. Feed the RJ45 cable through the front opening of the wall mount bracket. (If you want to use external devices such as sensors and alarms, please refer to the assembling steps on the next page�) 4� Open the lens c
Resumen del contenido incluido en la página 9
VIVOTEK Waterproof Connector Components of the Waterproof Connector Pin Definition 1 Power +12V Screw Nut (A) 2 Digital Output Seal (B) 3 Digital Input Seals (C) 4 Ground 1 2 3 4 5 6 7 8 5 AC 24V Housing (D) 6 AC 24V Sealing Nut (E) 7 RS485 + 8 RS485 - 1 External MIC In 2 Ground 3 Audio Out 4 Ground Assembling Steps 1� Disassemble the components of the waterproof connector into part (A) ~ (E) as shown above� 2� Open the back cover of the Network Camera� 3� Remove the rubber stopper from the b
Resumen del contenido incluido en la página 10
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment Setting up the Network Camera over the Internet There are several ways to set up the Network Camera over the Internet� The first way is to set up the Network Camera behind a router� The second way is to utilize a static IP� The third way is to use PPPoE� Internet connection via a router Before setting up the Network Camera over the Internet, make sure you have a router and follow the steps below� 1� Connect your Ne
Resumen del contenido incluido en la página 11
VIVOTEK Internet connection with static IP Choose this connection type if you are required to use a static IP for the Network Camera. Please refer to LAN on page 38 for details� Internet connection via PPPoE (Point-to-Point over Ethernet) Choose this connection type if you are connected to the Internet via a DSL Line� Please refer to PPPoE on page 39 for details� User's Manual - 11
Resumen del contenido incluido en la página 12
PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Set up the Network Camera through Power over Ethernet (PoE) When using a PoE-enabled switch The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable� Follow the below illustration to connect the Network Camera to a PoE-enabled switch via Ethernet cable� power + data transmission PoE Switch When using a non-PoE switch If your switch/router
Resumen del contenido incluido en la página 13
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN� 1� Install IW2 under the Software Utility directory from the software CD� Double click the IW2 shortcut on your desktop to launch the program� 2� The program will conduct an analysis of your network environment� After your network environment is analyzed, please click Next to continue the program� 3� The program will search fo
Resumen del contenido incluido en la página 14
VIVOTEK Ready to Use 1� Access the Network Camera on the LAN� 2� Retrieve live video through a web browser or recording software� 3� Unscrew the zoom controller to adjust the zoom factor� Upon completion, tighten the zoom controller� 4� Unscrew the focus controller to adjust the focus range� Upon completion, tighten the focus controller� T N 3 W 4 14 - User's Manual ∞
Resumen del contenido incluido en la página 15
VIVOTEK 5� Tighten the lens cover� 6� Open the back cover� 7� Tear down the aluminum foil vacuum bag and take out the silica gel � Attach the silica gel to the inner side of the back cover, then tighten the back cover � (Please replace the silica gel with a new one if you open the back cover after installation�) 6 7 5 Note If you want to use the supplied sun shield for outdoor environments, please follow the steps below to install: 1 Tighten the supplied two screws 2 Attach the supplie
Resumen del contenido incluido en la página 16
VIVOTEK Accessories VIVOTEK also provides other accessories for versatile applications as the following illustrations� Please visit VIVOTEK's official website for more purchase information. Pole Mount Bracket Pendant Mount Bracket Corner Mount Bracket IR illuminator (distance 30m, 60°) Built-in 20 LED units (distance 25m, 35°) The 30m, 60° IR illuminator extends the coverage of the Network Camera and reduces the halo effect around captured images� 16 - User's Manual 60° 35°
Resumen del contenido incluido en la página 17
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using Web Browsers Use Installation Wizard 2 (IW2) to access to the Network Cameras on the LAN� If your network environment is not a LAN, follow these steps to access the Netwotk Camera: ® 1� Launch your web browser (ex� Microsoft Internet Explorer, Mozilla Firefox, or Netscape)� 2. Enter the IP addre
Resumen del contenido incluido en la página 18
VIVOTEK ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera� For more information about how to enable password protection, please refer to Security on page 31� ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable the ActiveX Controls for your browser� 1� Choose Tools > Internet Options > Security > Custom Level� ® 2. Lo
Resumen del contenido incluido en la página 19
VIVOTEK Using RTSP Players To view the MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming� Quick Time Player Real Player VLC media player 1� Launch the RTSP player� mpegable Player mpegable Player 2� Choose File > Open URL� A URL dialog box will pop up� 3� The address format is rtsp://:/
Resumen del contenido incluido en la página 20
VIVOTEK Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet� For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 10� To utilize this feature, please check the following settings on your Network Camera: 1� Because most players on 3GPP mobile phones do not support RTSP authentication, mak
