Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
PREFACE Thank you for purchasing the TV-IP322P SecurView™ Outdoor PoE Megapixel Day/Night Internet Camera, a standalone system that can be connected directly to an Ethernet or Fast Ethernet network. The camera is equipped with a 2-megapixel CMOS sensor, allowing you to capture high quality image with the resolution of up to 1280 x 1024. Additionally, the camera features the IR (Infrared) LEDs and ICR function (IR Cut Filter). The ICR function enables the camera to capture the clear im
Resumen del contenido incluido en la página 3
This Advanced Installation Guide provides you with the instructions and illustrations on how to use your camera, which includes: Chapter 1 Introduction to Your Camera describes the features of the camera. You will also know the components and functions of the camera. Chapter 2 Hardware Installation helps you install the camera according to your application environment. You can use this camera at home, at work, at any where you want. Chapter 3 Accessing the Camera lets you start using you
Resumen del contenido incluido en la página 4
Contents P R E F A C E C H A P T E R 1 I N T R O D U C T I O N TO Y O U R C A M E R A 1.1 CHECKING THE PACKAGE CONTENTS ............................................. 5 1.2 GETTING TO KNOW THE CAMERA ................................................. 6 1.3 FEATURES AND BENEFITS ............................................................ 9 1.4 SYSTEM REQUIREMENT ............................................................ 12 C H A P T E R 2 H A R D W A R E I N S T A L L A T I O N 2.1 A
Resumen del contenido incluido en la página 5
4.8 EVENT CONFIGURATION ........................................................... 58 4.9 TOOLS ................................................................................... 64 4.10 RS-485 ................................................................................. 66 4.11 SETTING UP THE SD CARD ......................................................... 70 4.12 INFORMATION ........................................................................ 72 C H A P T E R 5 S E C U RV I E
Resumen del contenido incluido en la página 6
CHAPTER 1 INTRODUCTION TO YOUR CAMERA 1.1 Checking the Package Contents Unpack the package and check the items contained in the package carefully. You should have the following: 1 x TV-IP322P 1 x Multi-Language Quick Installation Guide 1 x CD-ROM (Utility & User’s Guide) 1 x Desiccant ** 2 x GPIO Connector 1 x Spiral Cable Wrap 1 x Camera Mounting Bracket Kit* 1 x Power Adapter (12V DC, 1.5A) NOTE Once any item contained is damaged or missing, contact the autho
Resumen del contenido incluido en la página 7
1.2 Getting to Know the Camera The Camera and the Shield Shield* is used to protect the camera during inclement weather. Lens Assembly with IR LEDs Connectors Power, Audio, Mic, GPIO, LAN Camera Stand * There are various positions of screw hole on the shield, allowing you to move the shield forward/backward according to your needs. For example, it will protect the camera lens well during rainy day by adjusting the shield forward. - 6 -
Resumen del contenido incluido en la página 8
The Connectors The camera's connectors are collected into a bundle of cable on the back panel of the camera, allowing you to connect the external devices in a well-ordered way while you are installing the camera onto the wall (or ceiling). Power: Connects the power adapter to supply power to the camera. GPIO: Connects the external device that features additional controlling function, such as motion detection, event triggering, alarm notification, and a variety of external contro
Resumen del contenido incluido en la página 9
LAN: Plugs the provided Ethernet cable to connect to your local area network (LAN). The LAN port of the camera supports the NWay protocol so that the camera can detect the network speed automatically. - 8 -
Resumen del contenido incluido en la página 10
1.3 Features and Benefits H.264/MPEG4/MJPEG Multi-codec Supported The camera provides you with excellent images by the H.264/MPEG4/ MJPEG multi-codec selectable technology, allowing you to adjust image size and quality, and bit rate according to the networking environment. High Resolution Surveillance Equipped with a megapixel CMOS sensor, the high performance camera is designed for your professional surveillance and security applications. The image resolution is up to 1280 x 1024.
Resumen del contenido incluido en la página 11
Remote Control Supported By using a standard Web browser or the bundled SecurView™ Pro software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also allowed to monitor the image and take snapshots via the network. I/O Connectors and RS-485 Provided The I/O connectors (IN/OUT) of the camera provide the physical interface to send
Resumen del contenido incluido en la página 12
automatically. This allows the camera to capture clear image whenever the environment light changed. PoE Supported PoE (Power over Ethernet) standard enables the camera to be powered by the Ethernet, which simplifies your surveillance system by eliminating the need of power outlet. The PoE camera features both stability and security, providing a cost-saving solution to your application of Internet camera. Please make sure that you remove the power adapter when the camera power is supp
Resumen del contenido incluido en la página 13
1.4 System Requirement Networking LAN 10 Base-T Ethernet or 100Base-TX Fast Ethernet; Auto-MDIX. PoE IEEE 802.3af PoE Accessing the Camera using Web Browser Platform Microsoft® Windows® 7/Vista/XP CPU Intel Pentium III 800MHz or above RAM 512MB Resolution 800x600 or above User Interface Microsoft® Internet Explorer® 6.0 or above Accessing the Camera using S e c u r Vi e w™ Pro Platform Microsoft® Windows® 7/Vista/XP Resolution 1024 x 768 or above Hardware
Resumen del contenido incluido en la página 14
CHAPTER 2 HARDWARE INSTALLATION - 13 -
Resumen del contenido incluido en la página 15
2.1 Assembling the Camera Mounting Bracket Assemble the sun visor and camera mounting bracket to the camera by using the provided screws and washers, and then the camera can be mounted on the wall (or ceiling) securely through the three screw holes on the base of the holder. Adjust the camera position Once you have mounted the camera to the wall (or ceiling), you need to adjust the camera position to focus on the location where you want to monitor. You can adjust the camera position
Resumen del contenido incluido en la página 16
junction points of the connectors while you connect the cables or purchase a weatherproof cable/power cord protector. 2.3 Installing the Memory Card The camera provides a SD card slot that allows you to install the memory card (not included in the package) to store files. To install the memory card: 1. Remove the back cover of the camera by unscrewing the three screws. 2. Locate the SD card slot inside the camera, and then insert the memory card into the slot. 3. Replace the back cove
Resumen del contenido incluido en la página 17
2.4 Applications of the Camera The camera can be applied in multiple applications, including: Monitor local and remote places and objects via Internet or Intranet. Capture still images and video clips remotely. Upload images or send email messages with the still images attached. The following diagram explains one of the typical applications for your camera and provides a basic example for installing the camera. NOTE The camera’s connectors are not w
Resumen del contenido incluido en la página 18
CHAPTER 3 ACCESSING THE CAMERA 3.1 Using IP Setup The camera comes with a conveniently utility, IP Setup, which is included in the Installation CD-ROM, allowing you to search the camera on your network easily. 1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program. - 17 -
Resumen del contenido incluido en la página 19
2. Click the IP Setup from the Auto-Run menu screen. Then IP Setup Wizard will appear. Click “Next” when the Welcome to the IPSetup Setup Wizard appears. 3. Click “ B rows e” to choose the desired destination location. By default, the destination location is C:\Program Files\TRENDnet\IPSetup. Then Click “Next ”. - 18 -
Resumen del contenido incluido en la página 20
4. Click “Next” to confirm the IPSetup software to be installed to the computer. 5. When the Installation Complete window appears, click “Finish”. - 19 -
