Manual de instrucciones de Swann Pro-752 Surveillance/Network Camera SWPRO752CAM

Resumen del contenido incluido en la página 1

English
PRO-752 Dome
M752CAM020113E

Resumen del contenido incluido en la página 2

Warranty Information, Verifications & Warnings Swann Communications warrants this product against defects in workmanship and material for a period of one (1) year from its original purchase date. You must present your receipt as proof of date of purchase for warranty validation. Any unit which proves defective during the stated period will be repaired without charge for parts or labor or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred to

Resumen del contenido incluido en la página 3

Introduction Congratulations on your purchase of this Swann PTZ Camera! This installation and setup guide will walk you through the basics of connecting the PTZ camera to your DVR, and walk you through the settings on the DVR you’ll need to use to control the camera. Be aware that the camera must be connected to a compatible DVR to operate correctly. The included stand-alone RS485 controller will operate the basic features of the camera, and access the on-screen display (OSD). You won’t be

Resumen del contenido incluido en la página 4

Installation Guide Step 1. Connecting the Camera Cable Before mounting the camera, it is important to connect it correctly. 1. Run the cable through the mounting arm or bracket you would like to use. 2. Make sure you run the cable through starting with the camera end (not the end with the BNC connectors - they’re too big to fit). 3. Once the cable has been pulled through, plug it into the top of the camera. 4. If you’re planning to mount the dome outside, cover the screw threads with a sili

Resumen del contenido incluido en la página 5

How it Works Connecting the Camera • For information on how to physically connect the camera, see the connection diagram on page 7. • If you’ve only got one PTZ device, you won’t have to configure the camera at all, although you still can, if you choose to (see the online OSD guide available for free download from www.swann.com/OSD). • If you’ve got multiple PTZ devices, then you’ll need to assign the command address of each to be unique. What is this “OSD”? The OSD is the On Screen Disp

Resumen del contenido incluido en la página 6

Configuring your DVR You can connect the camera to any input on the DVR. For sake of ease, we suggest connecting it to channel 1. These instructions assume you’re using a Swann DVR 3000 or Swann DVR 4000. If you’ve got a different DVR, then the location of the connections may be different, but it works much the same way. Configuring the DVR Once you’ve got the PRO- 752 properly connected to your DVR as shown and 1 have followed the basic configuration procedures as described in your DVR’

Resumen del contenido incluido en la página 7

Connection Diagram 1. Connect the BNC output from the camera to the 4. Connect the two wires on the end of the extension extension cable. cable to your DVR’s RS485 plug, and connect to the back of the DVR. 2. Attach the RS485 plug to the wires on the camera’s cable. 5. Plug the BNC output into a channel input on the DVR. 3. Connect the DC jack on the end of the extension cable to the included power adapter. 3 5 4 This is the Device: PTZ setup screen from the DVR-4000’s menu system. Your DV

Resumen del contenido incluido en la página 8

Helpdesk / Technical Support Details Swann Technical Support All Countries E-mail: tech@swann.com Telephone Helpdesk USA toll free AUSTRALIA toll free 1-800-627-2799 1300 138 324 (Su, 2pm-10pm US PT) (M 9am-5pm AUS ET) (M-Th, 6am-10pm US PT) (Tu-F 1am-5pm AUS ET) (F 6am-2pm US PT) (Sa 1am-9am AUS ET) USA Exchange & Repairs NEW ZEALAND toll free 1-800-627-2799 (Option 1) 0800 479 266 (M-F, 9am-5pm US PT) UK 0203 027 0979 (M-F, 8am-6pm) © Swann Communications 2013