Resumen del contenido incluido en la página 1
CVC-6246iHR
540 Line Color Dome Camera
Intensifier Series
Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep
it handy for further reference.
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
WARNING & CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL._______________ The lighting flash with an arrowhead symbol, within an equilateral triangle is Intended to alert the user to the pr
Resumen del contenido incluido en la página 4
Contents Package Contents 3 Precautions 4 Camera Installation 5 Internal Components 7 Features 9 1
Resumen del contenido incluido en la página 5
Operating Your Camera 11 SET UP 13 SET UP LENS 14 SHUTTER SPEED CONTROL 15 BACK LIGHT 19 AUTO GAIN (AGC) 20 WHITE BALANCE 21 REDUCE NOISE 23 INTENSIFIER 24 CAMERA TITLE 25 27 DAY/NIGHT/SYNC MOTION DETECTION 29 31 PRIVACY 32 REVERSE 33 DETAIL 34 DEFAULT/RETURN Troubleshooting 35 Specifications / Dimensions 37 Warranty 39 2
Resumen del contenido incluido en la página 6
PACKAGE CONTENTS • Please make sure that the following items are included in the package: 1 CVC-6246iHR Camera 2 Mounting Screws 1 Video test Connector 1 Power Adaptor Lead Please leave this manual with the end-user for future reference. 3
Resumen del contenido incluido en la página 7
PRECAUTIONS • THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL • TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE PROPER POWER CABLE • THE DOME COVER SHOULD BE TREATED WITH CARE. DO NOT CELAN THE COVER WITH AN ABRAISIVE CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO CLEAN THE DOME COVER • THERE ARE NO USER-SERVICEABLE PARTS INSIDE. PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN TO MAKE INITIAL ADJUSTMENTS • PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR
Resumen del contenido incluido en la página 8
CAMERA INSTALLATION CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 600 mA) POWER INPUT:RED CONNECT CENTER:(+) POWER SUPPLY 2. WHEN USING 24 VOLTS AC (40 Volt Amps) -CONNECT ACCESSORY CABLE TO THE POWER JACK AND CONNECT 24V AC TO THE LEAD POWER RED(+) CONNECT AC 24V BLACK:(-) POWER SUPPLY 3. CONNECT VIDEO CABLE -CONNECT BNC CABLE TO THE BNC JACK. YELLOW:VIDEO OUT
Resumen del contenido incluido en la página 9
INTERNAL COMPONENTS 1. Mechanical (2) Joy Stick Controller (1) DC Auto iris Lens (2.8~11mm) (1) DC AUTO-IRIS LENS Adjust between TW (TELE WIDE) to set the angle (focal length) Set the focus by adjusting ∞N NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED INTO POSITION THROUGH THE USE OF "LOCKING HANDLES". (2) JOY STICK TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY STICK FOR ONE SECOND AND SET AS DESCRIBED IN THE MANUAL 7
Resumen del contenido incluido en la página 10
2. Joy Stick Video Test Terminal UP SET RIGHT LEFT DOWN Push the Joy stick for one second, and the OSD appears on the screen. Move the Joy Stick up, down, left & right to control the OSD functions. 8
Resumen del contenido incluido en la página 11
Features SLC When the image is in front of strong background lighting, your camera allows you to get a clear image. INTENSIFIER 1/3 inch high density CCD and digital processor permit high quality pictures to be captured in very low light conditions. High Resolution Horizontal resolution of 540 TV lines is achieved by using a SONY Double Speed CCD with 410,000 pixels, yielding pictures with a high S/N ratio.. Motion Detection Built in motion detector with adjustable areas of coverage will
Resumen del contenido incluido en la página 12
OSD All camera functions are menu driven for easy use. Dynamic Noise Reduction The Intensifier camera has a DSP chip that can remove image noise efficiently showing clean images in low light conditions. ELECTRONIC DAY/NIGHT The Intensifier camera can show color pictures in all lighting conditions, or you can have it automatically switch to a B/W picture in low light conditions MANUAL / AUTO IRIS LENS The Intensifier camera will work with auto iris, manual iris and fixed iris lenses. 10
Resumen del contenido incluido en la página 13
Operating your camera OSD Function SETUP MENU LENS TYPE ●DC ●MANUAL SHUTTER TYPE ●OFF ●F/L ●MANUAL WHITE BALANCE ●ATW ●AWC MANUAL● SLC ●OFF ●LOW ●MIDDLE ●HIGH AUTO GAIN ●OFF ●LOW ●MIDDLE ●HIGH REDUCE NOISE ●OFF ●LOW ●MIDDLE ●HIGH INTENSIFIER ●AUTO ●OFF NEXT PAGE ●CAMERA TITLE ●DAY/NIGHT ●SYNC ●MOTION DET ●PRIVACY ●REVERSE ●DETAIL ●DEFAULT ●PAGE1 EXIT 11
Resumen del contenido incluido en la página 14
Operating your camera – SETUP 1. Press the SET button (JOYSTICK) to access the SETUP mode. SET UP menu is displayed on the monitor screen. 2. Select the desired feature using the UP or DOWN button. Each time you press the UP or DOWN button, the arrow indicator moves up or down. Move the arrow indicator to the desired feature item. 3. Change the status of the selected feature using the LEFT or RIGHT button. If you press the RIGHT or LEFT button, the status will change. Press the button to ge
Resumen del contenido incluido en la página 15
Operating your camera – SETUP LENS 1) Setting up the LENS Select the lens type by pressing the RIGHT button. ① On the SETUP menu screen, move the arrow indicator to the lens using the UP or DOWN button. ② Select the desired feature using the LEFT or RIGHT button. 14
Resumen del contenido incluido en la página 16
Operating your camera – SETUP LENS ▶When DC LENS selected, press SET button to control the BRIGHTNESS. 15
Resumen del contenido incluido en la página 17
2) Shutter status and speed control You can control brightness of the screen by the shutter speed. ① Press the SET button to display the setup menu and move the arrow indicator to ‘SHUTTER’ using the UP or DOWN button. ② Set ‘SHUTTER’ to the desired mode using the LEFT or RIGHT button. ▶ OFF : Deactivation ▶ FLK(1/100) : Flicker mode 16
Resumen del contenido incluido en la página 18
Operating your camera – SETUP SPEED CONTROL. ② ▶MANUAL : When setting the shutter speed manually. You can select speed from ‘1/60’ to ‘1/200,000’sec 17
Resumen del contenido incluido en la página 19
▶ELC : You can control the BRIGHTNESS. ③When completed, press ‘SET’ Notes Avoid pointing the camera directly at a fluorescent lamp When the SHUTTER menu is set to FLK mode, the INTENSIFIER will not work. 18
Resumen del contenido incluido en la página 20
Operating your camera – BACKLIGHT 3) SLC (Speco Light Compensation) - BACKLIGHT A built-in SR chip provides intelligent light level control to overcome severe Backlight conditions. ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘BACKLIGHT’ using the UP or DOWN button. ② SET ‘BACKLIGHT’ to the desired mode using the LEFT or RIGHT button. ▶OFF ▶LOW ▶MIDDLE ▶HIGH 19
