Manual de instrucciones de SECO-LARM USA Large IR Vandal Dome Cameras EV-2186-NKEQ

Resumen del contenido incluido en la página 1

Large IR Vandal Dome Cameras

Manual



Model No. Resolution Lens # of IR LEDs

NTSC
EV-2186-NKEQ 420 TV Lines 2.8~11mm 18
EV-2786-NKEQ 540 TV Lines 2.8~11mm 18

PAL
EV-2186-PKEQ 420 TV Lines 2.8~11mm 18
EV-2786-PKEQ 540 TV Lines 2.8~11mm 18

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

Resumen del contenido incluido en la página 2

SECO-LARM Large IR Vandal Dome Cameras Specifications: NTSC EV-2186-NKEQ EV-2786-NKEQ PAL EV-2186-PKEQ EV-2786-PKEQ Type Vandal Dome Camera 1 CCD /3” Sony Super HAD II CCD Resolution 420 TVL 540 TVL Lens 2.8~11mm DC Auto Iris # of IR LEDs 18 (850nm) IR range 50~65 ft (15~20 m) Pickup NTSC 510x492 pixels 768x494 pixels elements PAL 500x528 pixels

Resumen del contenido incluido en la página 3

SECO-LARM Large Vandal Dome Cameras Overview: Mounting screws Female BNC Conduit cap Set screws connector Zoom Focus DC plug with DC jack terminal block Important: Adjusting the Do not cut the DC jack or the female BNC Camera Angle connector as this will void the warranty. Move the camera along its 3 axes to adjust the pan, tilt, or rotation. Before Starting: 1. Please read this manual carefully and keep it for 6. Do not open or disassemble the

Resumen del contenido incluido en la página 4

SECO-LARM Large IR Vandal Dome Cameras Troubleshooting: Check that the camera is powered up. Check that the power supply’s polarity is correct. The screen is blank. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly. Clean the lens using a soft, clean cloth. The screen image is dim Check that the light source is adequate. Adjust the monitor’s contrast knob. The screen image has poor contrast. Change t