Resumen del contenido incluido en la página 1
User Guide User Guide
1. Read all of these instructions.
CAUTION
2. Save these instruction for later use.
RISK OF ELECTRIC
SHOCK, DO NOT OPEN
3. Unplug this appliance system from the wall
outlet before cleaning
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
Do not use liquid cleaners or aerosol cleaner.
NOT REMOVE COVER (OR BACK).
Use a damp cloth for cleaning.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
4. Do not use attachments not recommended by
PERSONNEL.
the
Resumen del contenido incluido en la página 2
User Guide User Guide 7. Slots and openings in the cabinet on the back or 13. Unplug this appliance from the wall outlet and bottom are provided for ventilation, to insure refer servicing to qualified service personnel reliable operation of the appliance, and to under the following conditions: protect from overheating. a. When the power cord or plug is damaged or frayed. These openings should never be blocked by b. If liquid has been spilled into the appliance. placing the appliance on a bed, so
Resumen del contenido incluido en la página 3
User Guide User Guide Contents 1. Introduction ............................................ 1. Introduction 2 Samsung CCTV B/W Camera (SBC-330A(P) .................................................. 2. Features 3 /331A(P)/300AP/301AP) is a surveillance camera that employs the latest CCD technology and can be .............................................. connected to a CCTV system to provide the best 3. Installation 4 ................... surveillance capabilities. Precautions in Installation and
Resumen del contenido incluido en la página 4
User Guide User Guide 2. Features 3. Installation Precautions in Installation and Use High Sensitivity Adopting the 1/3" Super HAD CCD that has the ➀ Do not attempt to disassemble the camera latest built-in microchip lens, the high sensitivity is yourself. realized. Be cautious in handling the camera. Avoid Excellent Back Light Compensation striking or shaking the camera. Be cautious to The built-in backlight compensation (BLC) function avoid damage on the camera caused by improper storage o
Resumen del contenido incluido en la página 5
VIDEO DC LENS User Guide User Guide Connecting Auto Iris Lens Connector Mounting the Lens Prepare the following Auto Iris Lens Connector Loosen a screw fixing the Flange Back Adjustment supplied with the camera. Ring by turning it counterclockwise and turn the Adjustment Ring to the "C" direction (counterclockwise) until it stops. Failure to do so Rib may result in a damage caused by the bump of the Pin3 lens against the image sensor part in the camera Pin1 when mounting the lens. Pin4 Pin2 C D
Resumen del contenido incluido en la página 6
User Guide User Guide Setting Lens Selection Switch Adjusting Back Focus Although the Back Focus of the camera has been When lens mounting is completed, set the Lens adjusted in the factory before its shipment, the focus selection Switch on the rear of the camera may not be accurate for a certain type of the lens. according to the mounted lens type. In this case, follow the procedures below to adjust the Back Focus. First, following is how to adjust the When the mounted lens is an Auto Iris Le
Resumen del contenido incluido en la página 7
User Guide User Guide The following describes how to adjust the Back Connecting Cable Focus when using a Zoom lens. After mounting the lens and setting the Lens ➀ Lightly loosen the screw fixing the Back Focus Selection Switch, connect the prepared cable to Adjustment Ring using a screwdriver. each terminal of the camera. Image a vivid subject (with check patterns) at a distance of 3~5m away and adjust the zoom of ➀ First, connect one end of the BNC cable to the the lens to TELE as far as it g
Resumen del contenido incluido en la página 8
User Guide User Guide ➂ AC24V/DC12V Power Input Camera. AC230V Power Input Camera Connect 2 lines of the power adapter using a Connect the power input cord to the AC 230V Phillips screwdriver to the Power IN Terminal of power source. the camera as shown below. Without the distinction of the polarity, connect to the AC 24V or AC 12V power source. AC24V DC12V 11 12 VIDEO LENS DC VIDEO LENS DC
Resumen del contenido incluido en la página 9
VIDEO DC LENS User Guide User Guide Auto Iris Lens Connector 4. Names and Functions of Parts Used for supplying power, which is required to control the iris of the lens, as well as control signal, Names and Functions of Parts video signal, or DC signal to the Auto Iris Control Lens. Side View Auto Iris Lens Control Cable Groove for Mount Adapter Auto lris Lens Connector Used for transmitting the control signals to the camera to control the iris of the lens. Flange-Back Adjustment Ring Flange-
Resumen del contenido incluido en la página 10
User Guide User Guide ➀ Power Connection Terminal Rear Panel Terminal to be connected to the power (adapter) cable- Connect it to AC 24V or DC 12V. AC24V/DC12V Power Input Camera ➁ Power Indication LED While the power is properly supplied to the camera, the LED is turn on. V-Phase Control In the Line Lock mode (SYNC LL), use a tool 5 such as a screwdriver to adjust the vertical sync 6 phase. PWR AC 24V VIDEO OUT DC 12V Function Switches 1 1. L/L 2. BLC 3. ELC 4. AGC AC230V Power Input Cam
Resumen del contenido incluido en la página 11
User Guide User Guide 1) SW1(L/L): 3) SW2 (ELC): If this switch is set to OFF, the camera will Use this switch with the Manual Iris Lens. While operate in the internal synchronization mode, and this switch is ON, the speed of the electronic if the switch is set to ON, the camera will operate shutter varies with the brightness of the subject in the line lock mode. from 1/60 to 1/100,000 sec for automatically If you are monitoring in the automatic switching controlling the brightness of the scre
Resumen del contenido incluido en la página 12
User Guide User Guide 5. Product Specifications SBC-330A/331A ALC /ELC ALC DC IRIS LENS Item Contents VIDEO LENS Product Type CCTV B/W Camera ELC Broadcasting EIA STANDARD SYSTEM Electronic SHUTTER IRIS function System Video Output COMPOSITE VIDEO OUT CCD 1/3” IT type S-HAD CCD 1V p_p 75 /BNC No. of Pixel 330A : 510(H) x 492(V) Power Source AC24V 10%(60Hz 0.1Hz) 331A : 768(H) x 494(V) DC12V 10%-5% Scanning Type 525 Line, 2:1 Interlace Power Consumption About 2 Watts Frequency INTERNAL : 15
Resumen del contenido incluido en la página 13
User Guide User Guide ALC /ELC ALC DC IRIS LENS SBC-330AP/331AP/300AP/301AP VIDEO LENS ELC Item Contents Electronic SHUTTER IRIS function Product Type CCTV B/W Camera Video Output COMPOSITE VIDEO OUT Broadcasting CCIR STANDARD SYSTEM 1V p_p 75 /BNC System Power Source 300AP/301AP CCD 1/3” IT type S-HAD CCD AC220V~240V 10%(50Hz 0.1Hz) No. of Pixel 330AP/300AP : 500(H) x 582(V) 330AP/331AP 331AP/301AP : 752(H) x 582(V) AC24V 10%(50Hz 0.1Hz) Scanning Type 625 Line, 2:1 Interlace DC12V 10%-5
Resumen del contenido incluido en la página 14
Digital B/W Camera - SBC 330A / 330AP - SBC 331A / 331AP - SBC 300AP / 301AP User Guide Part No.: AB68-00346A (Rev. 01) Printed in Korea
