Resumen del contenido incluido en la página 1
EVERFOCUS
Weatherproof Long Range IR Camera
Operation Instructions
Model No. EZ230E/235E/330E/335E
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1. Do not place any object on top of the
Resumen del contenido incluido en la página 2
will be abused by persons walking on it. 10. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 11. Never push objects of any kind into his appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. 12. Refer all work related to the installation of this product to qualified service personnel or system installers. 1
Resumen del contenido incluido en la página 3
PREFACE EZ230E/235E/330E/335E series camera is a true day/night, weather-proof, long range IR color camera, designed with the 1/3” SONY HAD color CCD to provide a high performance in low LUX environment. It is ideal for outdoor applications such as parking lots, gas stations and shopping malls. FEATURES The electronic shutter and AGC functions allow the camera to be used in environment with varying light levels The advanced 1/3” SONY Super HAD color CCD provides low light sen
Resumen del contenido incluido en la página 4
STANDARD ACCESSORIES IR Long Range Camera x 1 Operation Instructions x 1 (this document) Waterproof Connector x 1 (connected to the camera body) Bracket x 1 Mounting kit includes: -Long Screws x 4 (for mounting bracket) -Short Screws x 4 (for connecting camera body to bracket) -Expanding Screws x 4 -Hex key x 1 (for adjusting bracket) -Hexagon wrench x 1 (for adjusting sunshield) 3
Resumen del contenido incluido en la página 5
DIMENSIONS Dimension of holes to holes Dimension of Bracket 215mm/8.6” 84mm/3.36” 45mm/1.8” 100mm/4” 95mm/3.8” 80mm/3.2” 196mm/7.84” The dimension of whole camera with bracket 217mm/8.68” 350mm/14” 4
Resumen del contenido incluido en la página 6
NAMES AND FUNCTIONS OF BACK PANEL 24VAC model 110V~240VAC model 2 ○ 1 2 1 ○ ○ ○ 3 3 ○ ○ 1 ○ Video Output Connector Connect the video output of the camera to a color monitor or other video devices through a 75 Ohm type coaxial cable with BNC female connector at backside of the camera. 2 ○ Power Input Terminal Connect to the appropriate power to each model. N/L is used to connect to power in. PE is a ground pin. 3 ○ Cable clips Used to fix power cable.
Resumen del contenido incluido en la página 7
INSTALLATION GUIDE Sun shield Fixing screw for sunshield Bracket Power connector Video output 6
Resumen del contenido incluido en la página 8
1. Wire coaxial cable and power cable through the bracket. Note: Please use RG59/5C2V coaxial cable without connector 2. Fix the bracket to wall by using 4 screws. 7
Resumen del contenido incluido en la página 9
3. Open camera’s back cover: Loose the 2 screws from the back panel, then open the back cover. Screws for back panel 4. Take off the cap of waterproof connector which is under the camera. Power cable Coaxial cable Reserved 8
Resumen del contenido incluido en la página 10
Note: 1. The holes of waterproof connector were plugged by stoppers, please remove the stoppers when you need to use it for connection. 2. Please always keep the smallest hole (5 mm) plugged by stopper, to avoid any possible damage caused by humidity. This is a reserved hole. 5. Take coaxial cable and power cable to pass through waterproof connector, place them into camera housing. Note: Do not connect BNC connector to coaxial cable until coaxial cable has passed through camera housi
Resumen del contenido incluido en la página 11
Video cable and power cable Note: 1. Power cable’s diameter must be under 10mm 2. Only use RG59/5C2V coaxial cable 6. Close the waterproof cap and fix waterproof connector to the base of camera firmly. 10
Resumen del contenido incluido en la página 12
7. Fix the camera body to bracket by using the 4 shorter screws. 8. Connect RG59 coaxial cable with BNC connector. 9. Unscrew the cable clips, wire power cable through the cable clips. Then, screw the cable clips to rear panel. Power cable Coaxial cable Cable Clips 11
Resumen del contenido incluido en la página 13
10. Close the back cover and screw the 2 screws firmly. Now, you are done with the installation. Screws for back panel ADJUSTMENT Adjust camera’s angle vertically or horizontally by using hex key included in package. Loose this screw to make angle adjustment vertically Loose this screw to make angle adjustment horizontally 12
Resumen del contenido incluido en la página 14
SPECIFICATIONS Type EZ230E EZ235E EZ330E EZ335E Pickup Device 1/3” SONY Super HAD CCD Picture Elements 510 x 492 (NTSC) 768 x 494 (NTSC) 500 x 582 (PAL) 752 x 582 (PAL) Horizontal Resolution 380 TVL 520 TVL Video Output BNC 1.0Vp-p, 75ohm *Lens Type 6mm, 8mm 8mm, 16mm, 25mm 6mm, 8mm 8mm, 16mm, 25mm Sensitivity 0.3 Lux/F=1.2 (AGC ON) 0.4 Lux/F=1.2 (AGC ON) 0 Lux (IR On) 0 Lux (IR On) Gamma Correction 0.45 S/N Ratio Over 48 dB (AGC off) Auto White Balance Yes Black Light Comp. Yes A
Resumen del contenido incluido en la página 15
EverFocus Electronics Corp. Head Office: Europe Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Albert-Einstein-Strasse 1 Hsi-Chih, Taipei, Taiwan D-46446 Emmerich, Germany TEL: +886-2-26982334 TEL: 49-2822-9394-0 FAX: +886-2-26982380 www.everfocus.de www.everfocus.com.tw China Office: Room 609, Technology Trade Building, USA L.A. Office: Shangdi Information Industry Base, Haidian 1801 Highland Ave. Unit A District, Beijing,China 10085 Duarte, CA 91010, U.S.A. TEL: +86-
