Resumen del contenido incluido en la página 1
IS4813, IS4815, IS4823, and IS4825
Single-Line Laser Scan Engine
Integration Guide
Resumen del contenido incluido en la página 2
Disclaimer Metrologic Instruments Inc. (Metrologic) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Metrologic to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Metrologic. Metrologic shall not be liable for technical or editorial errors or omissions contained herein: nor for incidenta
Resumen del contenido incluido en la página 3
Table of Contents Introduction Product Overview ...........................................................................................................................................1 Models and Accessories Non-Decode Engines................................................................................................................................2 Decode Engines.......................................................................................................................
Resumen del contenido incluido en la página 4
Sleep Mode...................................................................................................................................................18 Serial Configuration Mode......................................................................................... 19 Abbreviated ASCII Table ..............................................................................................................................20 General Design Specifications.................................
Resumen del contenido incluido en la página 5
Introduction Product Overview The non-decode IS4813 and IS4815 laser scan engines are designed for direct integration into custom OEM devices equipped with a decoder. The engine’s small size is ideal for integration into mobile computers, hand- held scanners, medical/diagnostic equipment, mobile printers, lottery terminals, ATMs and access control devices. For customer applications requiring decode functionality in addition to solid scan engine performance, the IS4823 and IS4825 mod
Resumen del contenido incluido en la página 6
Models and Accessories Non-Decode Engines Options Model Description IS4813 Non-Decode, 3.3VDC Scan Engine IS4815 Non-Decode, 5VDC Scan Engine Accessories Part Number Description 19-07335 Flex Cable, 10-POS, 67.5 mm Length Decode Engines Options Base Model Description IS4823 3.3VDC Scan Engine with Decode PCB IS4825 5VDC Scan Engine with Decode PCB Model and Kit Delineation Figure 1. IS4823/IS4825 Model and Kit Delineation Accessories Part Number Description 19-0032
Resumen del contenido incluido en la página 7
Components of the IS4800 Engine Series IS4813 and IS4815 Non-Decode Engine Item Description Item Location 1 Pin Locator Holes (see page 6) 2 Threaded Mounting Points (see page 6) Exit Beam Location, Laser Light Aperture 3 AVOID EXPOSURE! – LASER LIGHT IS EMITTED FROM THIS APERTURE. 4 Flex Cable, 10-POS 5 ZIF Connector, 10-Pin 6 Printed Circuit Board and Shield Figure 3. IS4813/IS4815 7 Die Cast Chassis IS4823 and IS4825 (-0) Decode Engine Assembly Item Description Item L
Resumen del contenido incluido en la página 8
† IS4823 and IS4825 Bracketed (-1 and -2) Decode Engine Assembly Item Description Item Location 1 Flex Cable, 12-POS 2 Flex Cable, 10-POS 3 ZIF Connector, 10-PIN Exit Beam Location, Laser Light Aperture AVOID EXPOSURE! – LASER 4 LIGHT IS EMITTED FROM THIS APERTURE 5 IS4813 or IS4815 Laser Scan Engine † Figure 5. IS4823-1/IS4825-1 Assembled 6 ZIF Connector, 12-PIN 7 Decode Printed Circuit Board 0.10 Dia. Clearance Holes for Mounting, 8 2 Pls. M2 x 0.4 Threaded Bosse
Resumen del contenido incluido en la página 9
Assembly IS4823-2 and IS4825-2 Figure 7. IS4823-2/IS4825-2 Assembly Item Description Qty. 1 Bracket, Base 1 2 Screw, M1.6 x 35 – 5 mm, Philips Stainless Steel with Patch 2 3 IS4813 or IS4815 Scan Engine 1 4 Flex Cable, 10-POS 1 5 Decode Printed Circuit Board 1 6 Flex Cable, 12-POS 1 7 Bracket, PCB Locking Bar 1 8 Screw, M1.2 – 6 mm, T3, Thread Forming 2 Tools Required Size ® Torx Screw Driver T3 Phillips Screw Driver 00 5
Resumen del contenido incluido en la página 10
Mounting Specifications IS4813 and IS4815 Scan Engine Dimensions The engine has two M1.6 tapped holes on the bottom of the chassis for mounting the engine with screws. Two additional blind holes are provided on the bottom of the engine for keying purposes to assist with engine alignment (see figure below). Warning: The limited warranty (on page 37) is void if the following recommendations are not adhered to when mounting the IS4800 series laser scan engine. Follow the guidelines list
Resumen del contenido incluido en la página 11
IS4823 and IS4825 Bracketed (-1 and -2) Dimensions The engine bracket has three M2 x 0.4 threaded inserts on the bottom for mounting the assembly with screws. Two through holes are also provided as an alternative mounting method. Warning: The limited warranty (on page 37) is void if the following recommendations are not adhered to when mounting the IS4800 series laser scan engine. When securing the engine by utilizing the three M2 threaded inserts: • Use M2 x 0.4 Phillips Pan Head, Typ
Resumen del contenido incluido en la página 12
IS4823 and IS4825 (-0) Decode Printed Circuit Board Dimensions Warning: The limited warranty (on page 37) is void if the following recommendations are not adhered to when mounting the IS4800 series laser scan engine. When securing the decode board: • 3M™ 4032 1/32" double-coated urethane foam tape (or equivalent). • Use safe ESD practices when handling and mounting the decode board. Figure 10. IS4823/IS4825 Decode PCB Dimensions Specifications are for reference only and are subjec
Resumen del contenido incluido en la página 13
Exit Beam Specifications Figure 11. IS4800 Series Exit Beam Specifications See page see pages 12 - 15 for information on window material specifications and enclosure design considerations. Specifications are subject to change without notice. 9
Resumen del contenido incluido en la página 14
Enclosure Specifications The IS4800 laser scan engine series was specifically designed for integration into custom housings for OEM applications. The scan engine’s performance will be adversely affected or permanently damaged when mounted in an unsuitable enclosure. Note: THIS DEVICE DOES NOT COMPLY WITH 21 CFR 1040. USE ONLY AS COMPONENT. The limited warranty (on page 37) is void if the following considerations are not adhered to when integrating an IS4800 series scan engine int
Resumen del contenido incluido en la página 15
Flex Cables Note: To ensure optimum engine stability, use the flex cables shipped with the scan engine. The host flex cable is used to carry power and data signals between the engine and the host system. The flex cable should allow for a minimal voltage drop and maintain a good ground connection between the host and the engine. In terms of grounding and voltage drop, a shorter cable is better. The 10-POS flex cable used to connect the engine to the host or the engine to the decode PCB
Resumen del contenido incluido en la página 16
Beam Clearance • Keep the scan engine’s beam sweep free from obstructions. For detailed information on the exit beam angle and location, please refer to Exit Beam Specifications on page 9. • A dark matte-finish on the internal walls of the housing can be utilized to avoid internal beam reflections. Output Window Properties Note: Contact a customer service representative to coordinate the best window material required to maintain laser safety requirements for your application. An im
Resumen del contenido incluido en la página 17
Output Window Coatings • Anti-Reflection An anti-reflective coating can be applied to the inside and/or outside of the window to reduce the possibility of internal beam reflections interfering with the scan performance of the engine. If an anti- reflective coating is applied, it is recommended that it be on both sides of the window providing a 0.5% maximum reflectivity on each side from 640 to 690 nanometers at the nominal window tilt angle. The coating must also meet the hardness adhe
Resumen del contenido incluido en la página 18
Minimum Allowable Window Position Required To Avoid Detrimental Internal Reflective Beam Interference at Positive Exit Beam Angle Tolerance Minimum Projected Distance (mm) from the Exit Beam Minimum Engine’s Base Elevation Angle α Window Angle θ to the Window’s Internal Surface (L) +2.5° 5.0 28.0° +2.5° 10.0 14.5° +2.5° 15.0 10.5° +2.5° 20.0 8.0° +2.5° 25.0 7.0° +2.5° 30.0 6.5° +2.5° 35.0 6.0° +2.5° 40.0 5.5° +2.5° 45.0 5.0° +2.5° 50.0 5.0° Figure 12. S
Resumen del contenido incluido en la página 19
Minimum Allowable Window Position Required To Avoid Detrimental Internal Reflective Beam Interference at Negative Exit Beam Angle Tolerance Minimum Projected Distance (mm) Exit Beam Minimum from the Engine’s Base to Depression Angle β Window Angle θ the Window’s Internal Surface (M) -2.5° 5.0 23.5° -2.5° 10.0 16.5° -2.5° 15.0 12.5° -2.5° 20.0 10.5° -2.5° 25.0 9.0° -2.5° 30.0 8.0° -2.5° 35.0 7.5° -2.5° 40.0 7.0° -2.5° 45.0 6.5° -2.5° 50.0 6.0° Figure 13.
Resumen del contenido incluido en la página 20
Scan Engine Field of View and Depth of Field Field of View Distance from Engine Face Width of Field of View 50 mm (2") 57 mm (2.2") 254 mm (10") 264 mm (10.4") See page 9 for detailed information on the engine's exit beam specifications. Based on a .33 mm (13.0 mil) bar code. Figure 14. Typical Field of View Depth of Field vs. Minimum Bar Code Element Depth of Field* Bar Code (In the Field of View) Element Width Start End Total (From Engine Face) (From Engine Fac
