Resumen del contenido incluido en la página 1
P3PC-1422-03EN
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
CONTENTS ■ Regulatory Information ........................................................ ii ■ Note, Liability ....................................................................... iii ■ Safety Precautions ................................................................ v Chapter1 PREPARING THE SCANNER.................................. 1 1.1 Checking the Contents of the Scanner Package............. 1 1.2 Names of Parts ................................................................... 1 1.3
Resumen del contenido incluido en la página 4
INTRODUCTION Thank you for purchasing the fi-5900C Duplex Color •The use of a shielded interface cable NOTICE Scanner. is required to comply with the Class B This document describes how to use fi-5900C and basic limits of Part 15 of FCC rules. The operation methods. Before you start using fi-5900C be length of the SCSI interface cable sure to thoroughly read this manual to ensure correct must be 1.5 meters (5 feet) or less.. use. •The length of the AC cable must be 3 meters (10 feet)
Resumen del contenido incluido en la página 5
consumption. It is an open system in which About the use of mercury business proprietors can participate voluntarily. The targeted products are office equipment such Lamp(s) inside this product contain as computers, monitors, printers, facsimiles, mercury and must be recycled or g H copiers, scanners, and multifunction devices. disposed of according to local, state, or Their standards and logos are uniform among federal laws. participating nations. To avoid unexpected injuries; •Do not
Resumen del contenido incluido en la página 6
Where there is no distinction between the different Symbols Used In This Manual versions of the above operating system, the general term "Windows " is used. This symbol alerts operators to particularly ATTENTION ® ® Adobe Acrobat Adobe Acrobat important information. Be sure to read this information. All the descriptions in this manual assume the usage of Adobe Acrobat bundled with this product. However, Adobe Acrobat may be upgraded without notice. If the descriptions differ This
Resumen del contenido incluido en la página 7
■ Safety Precautions Turn the scanner OFF if it is damaged. If the scanner is damaged for any reason, turn off the scanner and unplug the AD cable before contacting the store you purchased the scanner. Do not damage the AC cable. Do not put liquids inside the scanner. A damaged AC cable may cause fire or electric Do not insert or drop metal objects in to the shock. Do not place heavy objects on AC scanner. Do not scan wet documents or cables, or pull, bend, twist, heat, damage or documen
Resumen del contenido incluido en la página 8
Before moving the scanner, disconnect the power plug from the power outlet. Do not move the scanner with the power and Do not install the scanner on unstable interface cables connected as this might surfaces. damage the cables, causing fire, electric shock or injuries. Before moving the scanner, be sure Make sure that the scanner is installed on a to disconnect the power plug from the power flat, level surface and that none of its parts outlet, and all other data cables. Make sure that
Resumen del contenido incluido en la página 9
Chapter1 PREPARING THE SCANNER 1.1 Checking the Contents of No. Name Function the Scanner Package 9 ADF cover Button used to open the ADF open button When you unpack the scanner package, make sure that 10 Pre-imprinter For the Pre-Imprinter option the package contains all the parts on the list included in cover the package. 11 ADF The documents loaded onto the If any parts are missing or defective, contact your scan- (Automatic Hopper will be fed sheet by sheet ner dealer or an authori
Resumen del contenido incluido en la página 10
Thi ck Thin Thin Thick Power Thickness Send to Scan Power Thickness Se nd t o Scan Hopper Heih gt Hopper Heih gt Function Function ■ Removable Parts 1.3 Operator panel The operator panel is located on the right side of the scanner. The panel consists of a Function Number Dis- play, buttons and a LED. Function number display 1 Function Hopper Height Paper Thickness Thin Thick S end to S c a n No. Name Description 1 Document Attached when the stacker posi- Name Function smoother tion is set
Resumen del contenido incluido en la página 11
Thin Send nd t to Scan ■ Indications on the Function Operator Panel Overlays are available in Number Display HINT French, German, Italian, Spanish, Chinese, Russian and Korean. To change the over- The following shows the indications on the Function lay, open the plastic cover. Number Display. No. Descriptions Lights only one time upon turning on the scanner. Indicates that the scanner has been turned ON and is being initialized. Indicates that initialization has been completed successfull
Resumen del contenido incluido en la página 12
Chapter2 INSTALLATION OF THE SCANNER 2.1 Installing the Scanner 2.2 Connecting the Scanner to Your PC 1. Place the scanner at its installation site. When running Windows 95 or Windows NT 4.0, con- For details on the scanner's dimensions and required installation space, refer to the fi-5900C nect the scanner using the SCSI interface. Operator’s Guide, chapter "10. Scanner Specifi- When running Windows 98, Windows Me, Windows cations". 2000, or Windows XP, connect either using the USB or SCSI
Resumen del contenido incluido en la página 13
3. Press the "I" side of the main power switch to 3. Set the SCSI ID using the SCSI ID switch on turn on the scanner. the back of the scanner. OFF ON The SCSI ID is initially set to "5" at the factory. If the SCSI ID of another SCSI device is set to the same ID, either change the scanner's SCSI ID or SCSI ID of the other SCSI device. ■ Connecting the SCSI interface When using the scanner with a SCSI interface, the fol- ID No. Description lowing SCSI cable and SCSI card must be purchas
Resumen del contenido incluido en la página 14
3. When using the SCSI cable, set the SCSI ID The following applications also come with fi-5900C. using the SCSI ID switch on the back of the They will provide you more convenient and advanced scanner. usage. (Refer to step 3 in "Connecting the SCSI interface" • Error Recovery Guide on page 5.) The Error Recovery Guide is a software that dis- plays troubleshooting information on screen if 4. Press the "I" side of the main power switch to any scanner error occurs. turn on the scanner. •
Resumen del contenido incluido en la página 15
Thin Thick Power Thickness Send to Scan Hopper Height Function ASPI Manager V4.01 or later is required (the generally comes with SCSI board products). ■ Installing the FUJITSU TWAIN32 Scanner Driver Windows XP screenshots are used in this HINT section. The windows and operations may vary slightly depending on your OS. 1. Open the hopper. 5. Insert the Setup CD-ROM into the CD drive. ⇒ appears. This screen may not appear when the ATTENTION "Autoplay" setting of
Resumen del contenido incluido en la página 16
8. Image Processing Software Option installation Installation of the scanner driver is completed. windows appears. The Image Processing software is an optional To confirm whether the installation was ATTENTION software that provides advanced binarization successful, perform a scanning operation image processing to the scanner dirver. with an application that complies with the TWAIN standards such as ScandAll 21. Selecting [Yes] in the Image Processing ATTENTION Software Option installatio
Resumen del contenido incluido en la página 17
For Windows 98, Windows Me, Windows HINT 2000, Windows XP: [FUJITSU Fi-5900Cd] For Windows 95, Windows NT 4.0: [FUJITSU TWAIN 32] 5. Select [To View...] from the [Scan] menu. 6. Select scanning resolution, document size, etc. on the [TWAIN driver] window and click the [Scan] button. For finishing the installation, it may be nec- ATTENTION essary to restart your computer. Follow the instructions in the Window. ■ Confirming Installation 1. Load documents on the scanner. For details on
Resumen del contenido incluido en la página 18
Thin Thick Power Thickness Send to Scan Hopper Height Function For FUJITSU ISIS Scanner Driver When using Windows NT 4.0, Windows ATTENTION 2000 or Windows XP, log on as a user with "Administrator" privileges. ■ Preparation Confirm the following items before installing the appli- ⇒ If the scanner is automatically detected, cation. [Found New Hardware Wizard] or [Add/ • Take out the Setup CD-ROM from its pack- Remove Hardware Wizard] dialog box will age, but do not insert the Setup CD-ROM
Resumen del contenido incluido en la página 19
7. The Error Recovery Guide Installation window appears. Depending on the OS, the following oper- ATTENTION ations may be necessary. The Error Recovery Guide is a software that dis- For Windows 98: plays troubleshooting information on screen if When a request for inserting the CD-ROM any scanner error occurs. Although this soft- of Windows 98 appears, insert it into the ware’s installation is highly recommended, it can CD drive and click [OK]. be installed later if you do not install it in
Resumen del contenido incluido en la página 20
4. Enter required information, then click [Next >]. TM ATTENTION "QuickScan Pro " included in the Setup 6. Select [Preview Scan] from the [Scan] menu. CD-ROM is an trial version. For further use after expiration of the trial period (up to 30 And then the document is scanned. launches), it is necessary to purchase a TM fully functional version of QuickScan Pro. (When you install the trial version, do not change the Serial Number already dis- played.) 5. Install the application following
