Resumen del contenido incluido en la página 1
PTC-860IM
User's Guide
Resumen del contenido incluido en la página 2
On December 1, 2000 Symbol Technologies, Inc. completed the purchase of Telxon Corporation. References made throughout this document to "Telxon" or "Telxon Corporation" are be replaced with "Symbol" or "Symbol Technologies, Inc.", respectively. Any questions, contact your Symbol representative. © 2000 by Symbol Technologies, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing f
Resumen del contenido incluido en la página 3
GUIDE TO THE PTC-860 Optical Models
Resumen del contenido incluido en la página 4
uide to the PTC-860 G Optical Models Part Number: 14767-701-03 Release Date: 10/20/94
Resumen del contenido incluido en la página 5
Telxon and TCAL (Telxon Common Application Language) are registered trademarks of Telxon Corporation. MS-DOS is a registered trademark of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. The information contained in this manual is subject to change without notice. Telxon Corporation shall not be liable for technical or editorial omissions or mistakes in this manual nor shall it be liable for incidental or consequential damages resulting from your use
Resumen del contenido incluido en la página 6
ÄÄ ontents C FCC statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PTC-860NI . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Responsibility for use . . . . . . . . . . . . . . . . . . . . 9 Use in hazardous locations . . . . . . . . . . . . . . . . . 9 Disposing of nickel-cadmiu
Resumen del contenido incluido en la página 7
ENTER/YES key . . . . . . . . . . . . . . . . . . . . . . 27 ON/OFF key . . . . . . . . . . . . . . . . . . . . . . . . 27 SHIFT key . . . . . . . . . . . . . . . . . . . . . . . . . 27 Keyboard overlay . . . . . . . . . . . . . . . . . . . . . . . . 28 Optical coupler . . . . . . . . . . . . . . . . . . . . . . . . . 28 Screwdriver . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 8
Handling the PTC-860 . . . . . . . . . . . . . . . . . . . . . 41 Storing the PTC-860 . . . . . . . . . . . . . . . . . . . . . . 42 Cleaning the PTC-860 . . . . . . . . . . . . . . . . . . . . . 42 Servicing the PTC-860 . . . . . . . . . . . . . . . . . . . . . 43 Replacing the batteries . . . . . . . . . . . . . . . . . . . . . . . . 44 Removing the batteries . . . . . . . . . . .
Resumen del contenido incluido en la página 9
Figures 1. Backup battery switch . . . . . . . . . . . . . . . . . . . 18 2. Parts of the PTC-860 . . . . . . . . . . . . . . . . . . . . 24 3. Accessory fasteners . . . . . . . . . . . . . . . . . . . . . 32 4. Using the accessory locking latch . . . . . . . . . . . . . 33 5. Inserting a battery pack . . . . . . . . . . . . . . . . . . 45 6. Inserting AA alkaline batteries into the plastic battery case . . .
Resumen del contenido incluido en la página 10
ÄÄ CC F statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this operator’s guide, may cause harmful interf
Resumen del contenido incluido en la página 11
ÄÄ afety S information © PTC-860NI Responsibility for use The standards used by Telxon for evaluation of the PTC-860NI (Non-Incendive) equipment’s suitability for use in the Hazardous Locations specified herein are applicable in the United States and may not be applicable outside of the United States. It is the customer’s responsibility to determine whether the NI unit will meet the regulatory/safety requirements for its operation and in the customer’s jurisdiction. The customer also assumes ful
Resumen del contenido incluido en la página 12
In hazardous locations, the PTC-860NI’s only user interface is its keyboard; the accessory ports are not suitable for use in hazardous locations. WARNING! Remove the PTC-860NI from the potentially hazardous area if the unit is damaged or suspected of being damaged. WARNING! Remove the PTC-860NI from the potentially hazardous location should the location become hazardous due to failure of containment systems, equipment, or other causes that would expose the unit to volatile substances. TABLE 1 Ha
Resumen del contenido incluido en la página 13
Class II Combustible dusts Division 2 • Not normally in the air • Accumulations normally sufficient to interfere with normal operation of electrical equipment or other apparatus • In the air as a result of infrequent malfunctioning of - handling equipment - process equipment • Accumulations are sufficient to interfere with the safe dissipation of heat from electrical equipment • Accumulations may be ignitible by abnormal or failure of electrical equipment Group E: Atmospheres containing combusti
Resumen del contenido incluido en la página 14
Class III Ignitible fibers or flyings Division 1 Division 2 • Fibers or materials • Fibers are handled Not grouped producing or stored except • Manufacturers combustible flyings during the process such as textile are manufactured, of manufacture mills, cotton- stored, or handled related mills, or clothing plants • Fibers and flyings including cotton, hemp, jute, rayon, sisal, and spanish moss Note: The previous information provides only general guidelines on the environments in which a PTC-860NI
Resumen del contenido incluido en la página 15
ÄÄ verview O of the PTC-860 The Telxon PTC-860 is a battery-powered hand-held computer used to collect, store, and transmit data. The PTC-860 automates your data collection procedures and is custom programmed to efficiently handle your organization’s unique data collection jobs. Options for scanning bar codes and printing are also available. Because the PTC-860 is custom programmed for each organization, this manual does not include the specific operating instructions for your organization’s uni
Resumen del contenido incluido en la página 16
Through the keyboard Entering data through the keyboard is similar to operating a calculator. As you press a key on the PTC’s keyboard, the corresponding number or letter appears on the display. Pressing the ENTER key stores data in the PTC’s memory. With a bar-code reader A second method of entering data is with a bar-code reader. When you pass the reader across a bar code the PTC is programmed to read, the PTC and reader interpret the data and store it in the PTC’s memory. Via cloning or downl
Resumen del contenido incluido en la página 17
Once the host computer receives the data from the PTC, it uses that data to update its master files and records. In some cases, the host computer may even transmit data back to the PTC, asking you, as the PTC’s operator, to perform a new task. © Models This manual covers the three optical models of the PTC-860: PTC-860, PTC-860ES, and PTC-860NI. These three models are similar but have the following differences: • The PTC-860 has a wand port (used to connect bar-code readers) on its side. • The P
Resumen del contenido incluido en la página 18
ÄÄ etting G started © PTC-860 optical models (PTC-860, PTC-860ES, and PTC-860NI) This manual collectively refers to all three PTC-860 optical models as PTC-860. Instances in which PTC-860 refers specifically to the PTC-860 unit will be obvious (for instance, in a comparison between models). To determine which model you have, refer to the “Models” section on page 15. © Unpacking the PTC-860 The PTC-860 is shipped in a single box containing • a PTC-860, PTC-860ES, or PTC-860NI, • an 800-mAhr AFAT
Resumen del contenido incluido en la página 19
1. Remove the PTC from the box. 2. Remove all packing material from the PTC. Save the packing material in case the PTC is ever stored or shipped to Telxon for service. 3. Check the contents of the package to make sure you have received everything ordered. 4. Check the PTC and accessories for shipping damage. Pay particular attention to the PTC case, display lens, and bar-code reader, if included. If anything is missing or damaged, notify your Telxon sales representative. © Turning on the backup
Resumen del contenido incluido en la página 20
FIGURE 1 Backup battery switch Interior view BATTERY COMPARTMENT BACKUP BATTERY COMPARTMENT BOTTOM OF PTC PEN OR PENCIL Interior side view PUSH DOWN PEN OR PENCIL BACKUP BATTERY SWITCH 18
