Resumen del contenido incluido en la página 1
MODELS
W2005, W2006, W2007
CLASSIC FENCE
INSTRUCTION MANUAL
Phone: 1-360-734-3482 • On-Line Technical Support: tech-support@shopfox.biz
COPYRIGHT © JANUARY 2000, REVISED MARCH 2004 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in Taiwan
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
CONTENTS INTRODUCTION ............................................................................................ 2¦¦¦¦ General ........................................................................................................... 2 Warranty ......................................................................................................... 3 SAFETY PRECAUTIONS ................................................................................... 4 INSTALLATION ..........................
Resumen del contenido incluido en la página 4
INTRODUCTION General Thank you for purchasing Woodstock Woodstock is pleased to provide this manual ® International’s SHOP FOX Classic Fence. to assist in the installation and operation of ® This fence is classic in its design and function, the SHOP FOX Classic Fence. It represents and provides a perfect upgrade for table saw our effort to offer the finest documentation owners who expect precision and ease of available. If you feel there are areas where this installation. It has been de
Resumen del contenido incluido en la página 5
Warranty Woodstock International, Inc. (Woodstock) We shall in no event be liable for death, warrants this product against defects in injuries to persons or property or for incidental, workmanship and materials under normal use contingent, special or consequential damages and service for a period of one year. This arising from the use of our products. warranty extends to the original purchaser from the date of purchase. This warranty does not To take advantage of this warranty, the product
Resumen del contenido incluido en la página 6
SAFETY PRECAUTIONS These safety rules cannot cover every situation in a woodshop. Consider your conditions when ® setting up and using your SHOP FOX Classic Fence. 12. USE A PUSH STICK WHEN CUTTING 1. KNOW YOUR TABLE SAW. Read the NARROW PIECES. owner’s manual carefully. Learn the tool’s applications and limitations, as well as its 13. DO NOT REACH BEHIND TABLE SAW particular hazards. TO GRAB CUTOFF PIECE. If wood binds 2. DO NOT REMOVE GUARDS. Maintain against saw blade it will ki
Resumen del contenido incluido en la página 7
INSTALLATION Model W2007 Inventory Back Rail 7' ................................... 1 Front Rail 7' ................................... 1 ® Installation of the SHOP FOX Classic Fence Front Rail Rectangular Tube 7' ............ 1 involves mounting the front and back rails to Scale ........................................... 1 your table saw, setting the fence on the rails Drill and Tap ................................. 1 and doing a simple alignment. First check the Blade Guard Clamp Bag cont
Resumen del contenido incluido en la página 8
3. Position the back rail so its top edge is flush with the table top and the rectangular cut-outs are in line with the UNPLUG the saw power cord, and TURN miter slots. See Figure 1. OFF the power switch before you begin fence installation procedures. Accidental saw startup while installing or adjusting the fence will result in serious personal injury. Rail Installation On most saws, the mounting holes for the rails will match the existing rail mounting holes. On the saws where the moun
Resumen del contenido incluido en la página 9
Mounting The Front Rail Mounting The Front Rail Tube 1. Align the side of the front rail with two 1. Orient the machined flat edge of the tube rectangular cutouts against the edge of the so it faces the table edge. table. 2. Thread four 1⁄4-20 X 3⁄4" hex bolts and 2. Set the top edge of the front rail so it is 1⁄4" washers through the rail and into the flush with the table top and the cutouts threaded holes in the bottom of the tube. are in line with the miter slots. If your saw table has a
Resumen del contenido incluido en la página 10
Fence 7-Foot Rails 1. Raise the lock handle up to release the The W2006/2007 extended 7' rail set for the ® fence locking tab and place the fence down SHOP FOX Classic Fence increases the rip on the rails. capacity to the right of the blade to 54''. These are mounted in the same manner as the 2. Make sure the angle bracket of the fence standard rails. The long rail set also includes assembly fits easily into the slot created by legs which provide added stability for the table the fron
Resumen del contenido incluido en la página 11
2. When installing the extension table, be sure Extension Table it is flush with the table saw top by placing a long straightedge across both tables and An extension table should be mounted between adjusting the extension until it is even along the fence extension rails to provide workpiece the length of the straightedge. Figure 7 support. The extension table width should be shows a typical installation. sized to fit in the gap between the rails. The length of the table extension can be
Resumen del contenido incluido en la página 12
Blade Guard Magnetic Switch ® The SHOP FOX Classic Fence is intended At the left hand edge of the front rail there are to work with all table saw blade guards. pre-drilled holes which can be used to mount After installing the rear rail you will be the table saw ON/OFF switch to the rail. This able to reinstall the guard assembly without relocation of the magnetic switch makes it easy interference with the rail. A typical installation to turn the saw on and off without reaching is shown bel
Resumen del contenido incluido en la página 13
ADJUSTMENTS ® 2. Turn the setscrews to align the edge of the Your SHOP FOX Classic Fence requires little fence to the edge of the miter slot while adjustment since most of the features are built- alternately locking and unlocking the fence in to the fence at the factory. The primary lock lever. adjustment is to adjust the fence so it is parallel to the saw blade. 3. Check to see if the fence is parallel along the length of the miter slot, carefully slide the tip of your finger along the
Resumen del contenido incluido en la página 14
Fence-to-Table Lock Handle The lock handle is cam actuated and locks Clearance against the machined edge of the front rail It is important to minimize the gap between rectangular tube. Generally it will require no the bottom of the fence and the table so adjustment. However it is sometimes possible thin material will not slide under the fence that the process of aligning the fence as during operation. This clearance must be described the Fence Parallelism on Page 11 uniform along the t
Resumen del contenido incluido en la página 15
Scale and Cursor The self adhesive scale and magnified cursor provide fast and accurate fence positioning. Zero Point for 1. Loosen the adjusting screws on the right of blade use magnified cursor until the cursor can be adjusted. 7 Approx 5 ⁄ '' 8 2. Raise the table saw blade guard out of the way. With the fence mounted on the right side of the blade, slide it over until its left edge touches the side of the blade. See 1 Scale ⁄ '' From Front Edge 2 Figure 12. Figure 13. Scale location
Resumen del contenido incluido en la página 16
Drilling Through-Holes Correcting Mounting 1. Position the rails flush with the top of the Hole Misalignment table saw table, and with the left end of the rails even with the left edge of the table If the front and back mounting holes do not line extension. up with the existing holes in the table top, it will be necessary to drill additional holes using 2. Clamp the rails to the table saw using C- one of the three following methods. Drilling clamps or bar clamps. and tapping holes into
Resumen del contenido incluido en la página 17
OPERATIONS To operate this, or any tool, safely and ® Using Board Buddies efficiently, it is essential to become as familiar with its characteristics as possible. Take as A T-slot track can be mounted in the top of the much time as necessary to become acquainted ® ® SHOP FOX Classic Fence to accept another with the SHOP FOX Classic Fence. The time popular product from Woodstock International you invest before you begin to use it will be ® - Board Buddies . These one directional, spring
Resumen del contenido incluido en la página 18
W2005 Fence Parts Diagram NOTE: The W2006 is a combination of the W2005 Fence and the W2007 Legs and 7' Rails. ® -16- Shop Fox Classic Fence
Resumen del contenido incluido en la página 19
W2005 Standard Rail Parts Diagram 26 ® Shop Fox Classic Fence -17-
Resumen del contenido incluido en la página 20
W2007 Leg and 7' Rail Parts Diagram NOTE: The W2006 is a combination of the W2005 Fence and the W2007 Legs and 7' Rails. ® -18- Shop Fox Classic Fence
