Resumen del contenido incluido en la página 1
COMPACT VHS CAMCORDER
GR-AX720
GR-AX420
GR-AX220
Compact VHS
For Customer Use:
Enter below the Serial Nos. of the
GR-AX720U/GR-AX420U/GR-AX220U
(The camcorder illustrations appearing in
camcorder and the AA-V11U AC Power
these instructions are of the GR-AX720.) Adapter/Charger.
The serial numbers are located on the
bottom of the GR-AX720U/GR-AX420U/
GR-AX220U, and the AA-V11U.
Model No.
GR-AX720U/GR-AX420U/GR-AX220U
INSTRUCTIONS
AA-V11U
Serial No.
LYT0002-007A
Resumen del contenido incluido en la página 2
2 Dear Customer, WARNING: Thank you for purchasing the JVC Compact VHS TO PREVENT FIRE OR SHOCK camcorder. Before use, please read the safety information and precautions contained in the following HAZARD, DO NOT EXPOSE pages to ensure safe use of your new camcorder. THIS UNIT TO RAIN OR Using This Instruction Manual MOISTURE. • All major sections and subsections are listed in the Table Of Contents (Z pg. 7). • Notes appear after most subsections. Be sure to read these as well. Warning on lithium
Resumen del contenido incluido en la página 3
3 5. Ventilation IMPORTANT PRODUCT Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and SAFETY INSTRUCTIONS to protect it from overheating, these openings must not be blocked or covered. Electrical energy can perform many useful functions. But • Do not block the openings by placing the product on a improper use can result in potential electrical shock or fire bed, sofa, rug or other similar surface. hazards. This product has been enginee
Resumen del contenido incluido en la página 4
4 USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits • Do not place this product on an unstable cart, a marked change in performance and you are stand, tripod, bracket or table. It may fall, causing unable to restore normal operation by following the serious injury to a child or adult, and serious detailed procedure in its operating instructions, do damage to the product. not attempt to service it yourself as opening or • Us
Resumen del contenido incluido en la página 5
QUICK OPERATION GUIDE 5 SUPPLY POWER INSERTING A VIDEO CASSETTE Hook on. EJECT 1 1 Push in. 2 2 3 Insert. PUSH BATT. RELEASE Using the battery pack 1 Hook-on the battery pack’s top end to the 1 Slide EJECT. camcorder. (Charging procedure, Z pg. 8) 2 Insert a video cassette. 2 Push in the battery pack until it locks into 3 Press PUSH. place. (For more details, Z pg. 12) To remove the battery pack Slide BATT. RELEASE and pull out the battery pack. PLAYBACK SHOOTING STOP REW 2 1 LENS COVER open/c
Resumen del contenido incluido en la página 6
MAJOR FEATURES 6 REMEMBER Program Manager (Z pg. 18 – 29) Program AE with Special Effects, Exposure The Logical Choice Control, Focus, Fader, Wide, Instant Title, Date/Time Character Insert, White Balance Adjustment, Menu Adjustment Variable-Speed Hyper Zoom The only compact video cassettes that can be (Z pg. 15) used with your VHS VCR* Zoom-in Program AE with Special Effects (Z pg. 18) Zoom-out n Auto Mode Lock n Auto Mode Release n Electronic Fog Filter n ND Effect n Sepia n Twilight n Spo
Resumen del contenido incluido en la página 7
CONTENTS 7 GETTING STARTED 8 Power ..................................................................................... 8 Clock (Lithium) Battery Insertion/Removal........................................ 10 Viewfinder Adjustment ............................................................... 10 Date/Time Setting .................................................................... 11 Tape Length Setting ................................................................... 12 Recording Mode Setting
Resumen del contenido incluido en la página 8
GETTING STARTED 8 Power CHG. (charge) indicator This camcorder’s 4-way power supply system lets you Marks choose the most appropriate source of power. POWER To AC outlet NOTES: indicator c No function is available without power supply. c Use only specified power supply. END c Do not use provided power supply units with other equipment. indicator CHARGING THE BATTERY PACK SUPPLY POWER Connect the charger’s AC power cord to a wall 1 outlet. The power indicator lights. ATTACH BATTERY PACK REFRESH s
Resumen del contenido incluido en la página 9
9 NOTES: c The recording time per charge is affected by such factors as the time spent in Record/Standby mode and the frequency of zooming. It is safer to have spare battery packs. c Charging times noted on page 8 are for fully discharged battey pack, and discharging times are for fully charged battery pack. c Charging and discharging times vary according to the ambient temperature and the status of the battery pack. c Remember to set the charge marker after charging a battery pack or after deta
Resumen del contenido incluido en la página 10
GETTING STARTED (cont.) 10 Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. A SWITCH OFF POWER Switch off the unit’s power and remove the power 1 supply unit. OPEN COVER Open the clock battery compartment cover while 2 pressing the release tab. REMOVE BATTERY (when replacing) Insert a pointed, non-metallic object between the 3 battery and the compartment ( A ) and pull the battery out. INSERT BATTERY Ensuring the plus (+)
Resumen del contenido incluido en la página 11
11 Date/Time Setting SELECT MODE MENU First set the power switch to “CAMERA”. Turn the 1 PROGRAM AE select dial to any position except AUTO LOCK. ACCESS MENU SCREEN Press MENU. 2 SELECT FUNCTION Press – to move the highlight bar down to “DATE/ 3 TIME”, then press NEAR. The Set Date And Time screen appears. + PROGRAM AE SET DATE/TIME select dial Press FAR or NEAR until the item you want to set 4 begins blinking, then press + or – to until the correct NEAR setting appears. •If you decide you want
Resumen del contenido incluido en la página 12
GETTING STARTED (cont.) 12 Tape Length Setting SP-EP recording mode button Set the tape length according to the length of the tape T20•30•40 tape used. length select button SET TAPE LENGTH Press T20•30•40 until the required indication 1 appears in the veiwfinder. T20 = 20 minutes of recording time, T30 = 30 minutes, and T40 = 40 minutes (in SP). NOTE: The tape remaining time (Z pg. 14) displayed in the viewfinder is correct only if the correct tape length has been selected. Recording Mode Setti
Resumen del contenido incluido en la página 13
13 Grip Adjustment EXPAND LOOP Separate the Velcro strip. 1 INSERT HAND Pass your right hand through the loop and grasp the 2 grip. ADJUST STRAP LENGTH Adjust so your thumb and fingers can easily operate 3 the Recording Start/Stop button and Power Zoom lever. Refasten the Velcro strip. Recording Start/Stop button Shoulder Strap Attachment ATTACH STRAP Following the illustration at left, thread the strap 1 1 through the top of the eyelet 1, then fold it back 3 and thread it through the keeper 2,
Resumen del contenido incluido en la página 14
RECORDING Basic Recording 14 NOTE: Tape remaining time indicator You should already have performed the procedures listed 25MIN *- - -MIN below. If not, do so before continuing. (Now calculating) c Power (Z pg. 8) c Tape Length setting (Z pg. 12) 120MIN c Recording Mode Setting (Z pg. 12) c Grip Adjustment (Z pg. 13) 119MIN LOAD A CASSETTE Slide EJECT to open the cassette holder, then insert 3MIN Power indicator 1 the cassette with the label facing out. Press PUSH to ensure the holder is closed
Resumen del contenido incluido en la página 15
RECORDING Basic Features 15 Power zoom switch FEATURE: Zooming PURPOSE: Varies the focal length of the lens and produces the zoom in/out effect. OPERATION: Zoom In 1) Push the power zoom switch down toward “T”. Zoom Out 1) Push the switch up toward “W”. NOTES: c The further the power zoom switch is pushed, the faster the zoom speed becomes. c Focusing may become unstable during zooming. In this case, set the zoom while in Record– Standby, set manual focus or Focus Lock (Z pgs. 20, 21), then zoo
Resumen del contenido incluido en la página 16
RECORDING Basic Features (cont.) 16 FEATURE: Quick Review PURPOSE: To check the end of the last record- ing. OPERATION: 1) Press “ ” and release quickly during the Record–Standby mode. •Tape is rewound for about 2 seconds and played back automatically, then pauses in Record–Standby mode for the RETAKE (R/F) next shot. NOTE: Distortion may occur at start of playback. This is normal. FEATURE: Retake PURPOSE: To re-record certain segments. OPERATION: 1) Make sure the camcorder is in the Record–Sta
Resumen del contenido incluido en la página 17
17 Video Light (GR-AX720 only) When natural lighting is too dim, you can brighten the scene by using the built-in video light. SET VIDEO LIGHT Set the LIGHT ON/AUTO/OFF as required. 1 ON : Always keeps the light on as long as the camcorder is turned on. AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on the subject. OFF : Turns off the light. •The video light can be used with the camcorder’s power on. LIGHT ON/AUTO/OFF •It is recommended to set the white b
Resumen del contenido incluido en la página 18
D N G F E E S A D E O L M E R O T K RECORDING Advanced Features 18 Program AE With Special Effects 1 second later, the mode is activated. All you have to do to access any of the variety of shooting effects is to turn the PROGRAM AE select SEPIA After dial. 1 sec. SELECT MODE Turn the PROGRAM AE select dial until the Viewfinder 1 symbol of the function you want is aligned with the mark. •The selected mode’s name and its indication are displayed in the viewfinder for approx. 1 second. Then the na
Resumen del contenido incluido en la página 19
19 DIAL VIEWFINDER DIAL VIEWFINDER MODE MODE SYMBOL INDICATION SYMBOL INDICATION SEPIA Sepia SPORTS Sports Sepia Sports The scene being shot is recorded in sepia-tinted High shutter speed clearly captures fast-moving (reddish-brown) monochrome, giving the effect of action. an older movie. Use together with Wide (Z pg. 22) 1/1000 sec. for the authentic look of a classic Hollywood 1/1000 S 1/1000 1 High Speed Shutter movie. 1/2000 sec. TWILIGHT Twilight 1/2000 S 1/2000 2 High Speed Shutter Twiligh
Resumen del contenido incluido en la página 20
RECORDING Advanced Features (cont.) 20 Focusing Auto Focus Focus The camcorder’s Full Range AF system offers continuous detection zone shooting ability from close-up to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): •When two subjects overlap in the same scene. •When illumination is low.* •When the subject has no contrast (difference in brightness and darkness), such as a flat, one-color wall, or a clear, blue sky.* •W
