Resumen del contenido incluido en la página 1
14" SLIDING TABLE SAW
MODEL G0451
INSTRUCTION MANUAL
COPYRIGHT © APRIL, 2005 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#EW6937 PRINTED IN USA. REVISED SEPTEMBER, 2005.
Resumen del contenido incluido en la página 2
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement, and other masonry products. • Arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often yo
Resumen del contenido incluido en la página 3
Table of Contents INTRODUCTION ............................................................................................................................... 3 Foreword .................................................................................................................................... 3 Contact Info ................................................................................................................................ 3 Machine Data Sheet ................................
Resumen del contenido incluido en la página 4
SECTION 5: ACCESSORIES ......................................................................................................... 43 SECTION 6: MAINTENANCE ........................................................................................................ 46 Schedule .................................................................................................................................. 46 Cleaning .....................................................................................
Resumen del contenido incluido en la página 5
INTRODUCTION Foreword Contact Info We are proud to offer the Model G0451 14" If you have any comments regarding this manual, Sliding Table Saw. This machine is part of a grow- please write to us at the address below: ing Grizzly family of fine woodworking machinery. When used according to the guidelines set forth in Grizzly Industrial, Inc. C this manual, you can expect years of trouble-free, /O Technical Documentation enjoyable operation and proof of Grizzly’s com- P.O. Box 2069 mitment to
Resumen del contenido incluido en la página 6
MACHINE DATA SHEET Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 MODEL G0451 14" Sliding Table Saw Overall Dimensions: 7 Overall Size ................................................................................105½"D (203 ⁄8" w/Sliding Table Extended) X 117½"W x 49"H Table Height .......................................................................................................................................................................
Resumen del contenido incluido en la página 7
Identification E C F D B A G I H Figure 1. Main view of machine features and controls. A. Crosscut Table—Provides a wide, stable F. Rip Fence—Fully adjustable with micro- platform for supporting full-size panels during adjustment knob for precision adjustments. crosscutting operations. Fence face can be positioned for standard cutting operations, or in the lower position for B. Flip Stops—Used for quick measurements blade guard clearance during narrow ripping for crosscutting. operations. C.
Resumen del contenido incluido en la página 8
O L Q K M N J P Figure 2. Fence controls. Figure 3. Blades. J. Fence Assembly Lock Down Lever— O. Riving Knife—Maintains kerf opening dur- Secures the fence assembly into position ing cutting operations. This function is crucial along the fence rail. to preventing kickback caused by the kerf closing behind the blade. K. Rip Fence Scale—Allows precise measure- ment of rip cutting operations. P. Main Blade—Performs the cutting opera- tions. L. Forward/Backward Slide Lock Handle— Secures the al
Resumen del contenido incluido en la página 9
Y X W Z AA R S V T U Figure 4. Control panel close-up. Figure 5. Scoring blade adjustment knobs. R. Power ON/OFF Button—Connects power to Y. Scoring Blade Elevation Knob—Adjusts all motors in the saw. the height of the scoring blade. S. Power Indicator Light—Indicates a live Z. Scoring Blade Alignment Knob—Adjusts connection to power. the alignment of the scoring blade and the main blade. T. Main Blade OFF Button—Stops the main saw blade. AA. Secondary EMERGENCY STOP Button— Disconnects powe
Resumen del contenido incluido en la página 10
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measure
Resumen del contenido incluido en la página 11
Safety Instructions for Machinery 7. ONLY ALLOW TRAINED AND PROP- 17. REMOVE ADJUSTING KEYS AND ERLY SUPERVISED PERSONNEL TO WRENCHES. Make a habit of checking for OPERATE MACHINERY. Make sure keys and adjusting wrenches before turn- operation instructions are safe and clearly ing machinery ON. understood. 18. CHECK FOR DAMAGED PARTS 8. KEEP CHILDREN AND VISITORS AWAY. BEFORE USING MACHINERY. Check Keep all children and visitors a safe dis- for binding and alignment of parts, broken tance
Resumen del contenido incluido en la página 12
Additional Safety Instructions for Table Saws 1. SAFETY ACCESSORIES. Always use the 7. RIVING KNIFE ALIGNMENT. Only oper- blade guard and riving knife on all ''through- ate the saw if the riving knife is aligned with sawing'' operations. Through-sawing oper- the main blade. ations are those when the blade cuts com- pletely through the workpiece. 8. REACHING OVER SAW BLADE. Never reach behind or over the blade with either 2. KICKBACK. Be familiar with kickback. hand while the saw is running. I
Resumen del contenido incluido en la página 13
• Make multiple, shallow passes when per- forming a non-through cut. Making a deep non-through cut will greatly increase the Statistics prove that most common acci- chance of kickback. dents among table saw users can be linked to kickback. Kickback is typically defined • Feed cuts through to completion. Anytime as the high-speed expulsion of stock from you stop feeding a workpiece that is in the the table saw toward its operator. In addi- middle of a cut, the chance of binding, result- ti
Resumen del contenido incluido en la página 14
Glossary Of Terms The following is a list of common definitions, terms and phrases used throughout this manual as they relate to this table saw and woodworking in general. Become familiar with these terms for assembling, adjusting or operating this machine. Your safety is VERY important to us at Grizzly! Arbor: Metal shaft extending from the drive Non-Through Cut: A sawing operation that mechanism, to which saw blade is mounted. requires the removal of the blade guard and riv- ing knife. Dad
Resumen del contenido incluido en la página 15
SECTION 2: CIRCUIT REQUIREMENTS Connection Type 220/440V 3-Phase Because of the high amperage draw from this machine, we recommend that you hardwire it directly to your circuit breaker and install a locking shut-off lever (see Figure 6) near the machine as a way to quickly disconnect the power and pre- Serious personal injury could occur if you vent accidental starting. connect your machine to the power source before you have completed the set up pro- cess. DO NOT connect the machine to th
Resumen del contenido incluido en la página 16
Phase Converter Rewiring to 440V When using a phase converter, the power from The Model G0451 can be rewired for 440V opera- the manufactured power leg (sometimes called tion. This rewiring job consists of disconnecting the wild wire) can fluctuate. Connect the manu- the saw from the power source, changing the factured power leg to the S terminal to prevent connections on the voltage transformer, chang- damage to the transformer. The wire from the S ing the overload relays for the scoring
Resumen del contenido incluido en la página 17
3. At the voltage transformer, pull the fuse that 6. Open the motor cabinet door and remove the is in the “220” slot and push it into the “440” motor wiring covers from the main motor and slot (see Figure 8). the scoring motor (see Figure 10). Scoring Main Fuse Motor Motor Figure 10. Motor locations. Figure 8. Fuse installed at the 220V location. 4. Turn the dial (Figure 9) on the main motor 7. Rewire the motors as shown on the diagrams overload relay to 15A. that are placed on the inside of
Resumen del contenido incluido en la página 18
SECTION 3: SET UP Set Up Safety Unpacking The Model G0451 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, This machine presents please immediately call Customer Service at serious injury hazards (570) 546-9663 for advice. to untrained users. Read through this entire manu- Save the containers and all packing materials for al to become familiar with possible inspection by the carrier or its agent. the controls a
Resumen del contenido incluido en la página 19
Box 4: (Figure 13) Qty Inventory I. Crosscut Table ........................................... 1 After all the parts have been removed from the boxes, you should have the following items: Box 1: (Figure 11) Qty A. Support Brace ............................................ 1 B. Small Extension Table ................................ 1 C. Large Extension Table ............................... 1 I A C Figure 13. Box 4 contents. B Box 5: (Figure 14) Qty J. Sliding Table End Handle ..................
Resumen del contenido incluido en la página 20
Box 7: (Figure 15) Qty Box 7 Cont.: Qty O. Rip Fence Body .......................................... 1 S. Toolbox Cont. P. Blade Guard/Dust Hood ............................. 1 — Hardware ............................................... 1 Q. Push Stick .................................................. 1 • Cap Screw M10-1.5 x 30 ........................ 4 R. Dust Collection Hose Support .................... 1 • Cap Screw M10-1.5 x 20 ...................... 10 • Hex Nut M10-1.5 ..................
