Resumen del contenido incluido en la página 1
DTB-9401F GB 0425 4/25/03 11:54 AM Page II
MF68-00271A
DIGITAL TERRESTRIAL RECEIVER
Resumen del contenido incluido en la página 2
DTB-9401F GB 0425 4/25/03 11:54 AM Page III DTB-9401F Instructions for use REV. 1.1 DIGITAL TERRESTRIAL RECEIVER
Resumen del contenido incluido en la página 3
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page IV SAFETY INSTRUCTIONS This STB has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. MAINS SUPPLY: AC 100~240V 50/60Hz OVERLOADING: Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock. LIQUIDS: Keep liquids away from the STB. CLEANING: Before cleaning, disconnect the STB from the wall socket. Use a cloth ligh
Resumen del contenido incluido en la página 4
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 1 SAFETY INSTRUCTIONS WARNING! 1. Follow these directions in order not to damage the power cord or plug. " Do not modify or process the power cord or plug arbitrarily. " Do not bend or twist the power cord too much. " Make sure to disconnect the power cord with holding the plug. " Separate heat appliances from the power cord as distance as possible in order to prevent the cover from being melted. 2. Failure to follow one of them may cause ele
Resumen del contenido incluido en la página 5
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 4 CONTENT Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting Your DTB-9401F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front Panel . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 6
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 5 GENERAL FEATURES 1. USER SECTION 400 PROGRAMMABLE CHANNELS ADVANCED ELECTRONIC PROGRAM GUIDE MULTI LANGUAGE SUPPORTED FOR OSD SUBTITLE & TELETEXT(OSD & VBI) SUPPORTED WITH MULTI LANGUAGE FULL FUNCTION INFRARED REMOTE CONTROL UNIT AUTO AND MANUAL SCAN FACILITY CHANNEL ORGANIZING (PROGRAMMABLE) LOW POWER CONSUMPTION AUTO UPDATED EPG 2. TUNER SECTION 50~860 MHz WIDE BAND TUNER RF LOOP-THROUGH OUTPUT(MALE) FOR ANALOG RECEIVER 3. VIDEO SECTION
Resumen del contenido incluido en la página 7
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 6 CONNECTING YOUR “DTB-9401F” 1. LOCATION OF THE RECEIVER Your DTB-9401F should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets. Avoid stacking other electronic components on the top of the receiver. The location should be safely accessible by the
Resumen del contenido incluido en la página 8
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 7 CONNECTING YOUR “DTB-9401F” Connecting Figure N No ot te e :In some region, the digital terrestrial signal may be weak. So you’d better use the antenna in which the booster was built, for watching the weak signal channels. GIT A L TERRESTRIAL RECEIVER GB-7
Resumen del contenido incluido en la página 9
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 8 DESCRIPTION Front Panel 1 2 1. Infrared Sensor This is to receive the IR commands from the Remote Control Unit. 2. LED When the LED light Red, the set-top box enters the standby mode. When the LED light Green, it enters the operation mode. DIGIT A L TERRESTRIAL RECEIV GB-8
Resumen del contenido incluido en la página 10
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 9 DESCRIPTION Rear Panel 6 5 4 3 2 1 1. AC MAINS This is to plug in the AC mains power cord. The input AC voltage range is 100V to 240V, 50Hz/60Hz supply. 2. DIGITAL AUDIO OUT Output for connection to a digital amplifier. 3. AV2(EXT) This is used to connect to your VCR. 4. AVI(TV) This is used to connect to your TV. 5. ANT. LOOP This is used to connect other receiver. 6. ANT. IN This is used to connect a terrestrial antenna. GIT A L TERRESTR
Resumen del contenido incluido en la página 11
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 10 DESCRIPTION Remote Control Unit N No ot te e : When inserting batteries, make sure that the polarity(+/-) is correct. 1. POWER This is used to switch the receiver ON/STANDBY mode. 2. 0-9 Numerical keys These keys are to enter numeric values and to select the channel directly by entering its number. 3. Pg+/Pg- These keys are used to move up or down pages the menu. 4. TV/RADIO This key is used to toggle between the TV channel and Radio
Resumen del contenido incluido en la página 12
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 11 DESCRIPTION 5. MUTE This key is used to toggle between normal & muted audio. 6. FAV Use the key to switch between favorite lists. 7. EPG Electronic Program Guide button displays the TV/Radio Program guide. 8. LAST This key is used to call up directly whatever channel you were watching list. 9. TEXT(green) This key is used to select the subtitle mode. This button functions same as the green button on the menu. Press once and subtitle appe
Resumen del contenido incluido en la página 13
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 12 BASIC FUNCTIONS 1. Display Screen Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels: Channel Number Signal Status Program Information Current Favorite The number of soundtrack in current channel ● Press the red( i ) key in view mode. ●
Resumen del contenido incluido en la página 14
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 13 BASIC FUNCTIONS 3. Select Soundtrack ● Press the ALT(yellow) key to see the soundtrack list. ● Press the / and OK key to select one. 4. Select Videotrack ● Press the ALT(yellow) key twice to see the videotrack list. ● Press the / and OK key to select one. 5. Service List ● Press the OK key to while you are viewing a program. ● Select list by pressing the TV/RADIO or FAV key. The icon behind the channel name symbolises scr
Resumen del contenido incluido en la página 15
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 14 BASIC FUNCTIONS 5.1 Service Favorites ● Press the green(TEXT) key on the control unit to select the Favorites list. ● Press the green(TEXT) key to toggle group and channel list. ● Use the / , Pg+/Pg- keys to select a favorite group that you want. 5.2 Service Alphabetical ● Press the yellow(ALT) key on the remote control unit to select the Alphabetical list. ● Press the yellow(ALT) key to toggle group and channel list. ● Use t
Resumen del contenido incluido en la página 16
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 15 BASIC FUNCTIONS 6. Program Information EPG-Electronic Program Guide The electronic program guide gives you a channel list for the channels. N No ot te e : 1. This service depends on service provider. 2. After receiver recognized the GMT-time from the signal which takes few seconds, it can display correct EPG information. ● Press the EPG key while you are viewing a program. This function is displayed on the screen by using only time. ●
Resumen del contenido incluido en la página 17
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 16 BASIC FUNCTIONS 8. Teletext OSD When the current broadcasting program provides Teletext OSD, press the TEXT key twice to see the current Teletext OSD list. To change the Teletext OSD: ● Use the / keys to select a Teletext OSD you want. ● Press the OK key and then the Teletext OSD you want is displayed on the screen. 9. Teletext VBI When the current broadcasting program provides Teletext VBI, press the TEXT key three times to see the
Resumen del contenido incluido en la página 18
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 17 OPERATING THE RECEIVER Main Menu After installing your antenna system and DTB-9401F with appropriate connectors. ● Plug in the AC main power and switch on the receiver. ● Press the MENU key to bring up the main menu. The following on screen display will appear: The sub menu topics will be displayed from 1 to 4. For the sub-menus 1, 2 and 3 you need the PIN Code. 1. Installation This menu consists of 3 sub-menus: Manual Scanning, Auto Scan
Resumen del contenido incluido en la página 19
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 18 OPERATING THE RECEIVER 1.1 Manual Scanning To tune-in new channels and weak signals, the DTB-9401F has been provided with the option “Manual Scanning” where the channel data can be entered by the user. After selecting the “Manual Scanning” from the Installation Menu, the following screen will be displayed: ● Select the channel which you want to find. ● Input the frequency of the channel you want to find. ● Select the bandwidth. You can se
Resumen del contenido incluido en la página 20
DTB-9401F DTB-9401F GB 0425 4/25/03 11:54 AM Page 19 OPERATING THE RECEIVER 1.2 Auto Scanning The sub menu “Auto Scanning” will enable download of the channels automatically from the preprogrammed load. To download channels automatically: ● Select the region which is possible in your location for Auto search. ● You can select All or Only Free option mode. All : Scanning all the channels Only Free : Scanning free channels ● Select the FFT (Fast Fourier Transform) Mode. You can select the valu
