Resumen del contenido incluido en la página 1
Owner’s Manual
MEDIAMASTER
9650S
Resumen del contenido incluido en la página 2
MEDIAMASTER 9650S Contents Volume level 16 FOR YOUR SAFETY 4 List of TV channels 16 Rear panel 4 List of Radio channels 17 Front panel 5 Video recorder 17 INSTALLATION OF THE MEDIAMASTER 5 Subtitling and Teletext. The TEXT Button 17 Connecting the Mediamaster to the SETTING FROM THE MAIN MENU 17 satellite dish 6 TV channels and radio channels 18 Connecting the Mediamaster to
Resumen del contenido incluido en la página 3
FOR YOUR SAFETY Keep a clear space around the Mediamaster to allow for sufficient ventilation. Do not cover the Mediamaster or place it on a unit that emits heat. !" Use a soft cloth and a mild solution of dish washing liquid to clean the casing. !"Never allow liquids, spray or other materials to come into contact with the inside of the Mediamaster. !" Service should be carried out only at a Nokia authorized service center. !" Do not connect or modify cables when the Mediamaster is p
Resumen del contenido incluido en la página 4
Front panel Display Slot Shows channel number, remote control For a two CA signal and time in standby mode. Module With a At start up, it displays the model number. Smartcard Power Up/Down To turn the receiver Select channel number, on/off (standby). up/down. INSTALLATION OF THE MEDIAMASTER The box for your Mediamaster should contain the following items: Mediamaster 9650S includes Owner’s Remote Controller Power
Resumen del contenido incluido en la página 5
Connecting the Mediamaster to the satellite dish Installing the satellite dish !" Your satellite dish should be installed with a cable for you to connect to the Mediamaster. If you do not have this cable you will need to buy one from a dealer (tell the dealer you need a coaxial cable and F-connectors). !" Connect the cable from the satellite dish to the socket marked ”LNB IN” on the back of the Mediamaster. If you need to fit the F-connectors onto the cable 15 mm Prepare ea
Resumen del contenido incluido en la página 6
Connecting to a TV and a Video recorder Refer to your video recorder manual for full instructions. !" Connect one SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. !" Connect another SCART cable between the VCR and the VCR SCART socket on the Mediamaster. !" Connect the RF cable from the RF output on the VCR to the TV aerial input on the TV. !" Connect the TV aerial to the RF input socket on the VCR. If Your VCR does not have a SCART conne
Resumen del contenido incluido en la página 7
Connecting to Hi Fi system Connect an RCA/Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your Hi Fi system. Preparing the remote control !"Remove the cover on the battery compartment at the bottom of the remote control handset. !" Insert the 2 x AAA (1,5 V) batteries, as shown in + - the diagram, taking care to observe the and markings indicated inside. !" Replace the cover. Before you conti
Resumen del contenido incluido en la página 8
About the Smart Card and CA Module. To be able to receive scrambled digital satellite channels you will need a Common Interface CA (Conditional Access) module and a smartcard from a Service Provider. It is possible to use two CA modules. The Service Provider is the programme distributor. If you are subscribing to services from more than one Service Provider, you might have to change between different Smart-cards and/or CA modules. Please note that a Smartcard and CA module may only
Resumen del contenido incluido en la página 9
REMOTE CONTROL This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be carried out using the buttons on the front panel. To switch the Mediamaster in and out of standby mode. EXIT TV To return to the viewing mode from a menu without storing settings (in menu mode). To switch between TV or Radio (in viewing mode). To turn the sound off/on (mute). To adjust the volume of digital programmes. The
Resumen del contenido incluido en la página 10
BASIC SETTINGS Basic Once you have correctly connected the Mediamaster, you also have to perform some “ Settings ”. During this procedure, helpful information is displayed at the bottom of the menus. Please note! OK confirms The button always a selection within these menus, and pressing it will take you to the next step in the installation process. However, and this is important, often more than one value has to be entered in a menu. First, perform all necessary settings on the di
Resumen del contenido incluido en la página 11
The Welcome Menu To install the Mediamaster properly you have to adjust a few settings. You will always be guided by the information at the bottom of the menus. When you have finished the final part of the setup procedure you can start watching TV channels and listening to radio channels. Now you should have the OK “Welcome Menu” on the TV screen. Press the button to proceed. Language Settings Select the menu language that you desire. This will define the language shown in the
Resumen del contenido incluido en la página 12
Satellite name: From here you can select a name for the configuration. Switch Type: There are in principle two kinds of external DiSEqC switches on the market at present. One for connection of two LNBs. The other one for connection of up to 4 LNBs. DiSEqC 1, 2, (3 If you have the other switch, defined as DiSEqC, Level 1 or 2 on the market, select “ or 4) ”, for each LNB connected to respective inputs on this switch. LNB Type: Selection is possible for different kinds of LNBs. Select
Resumen del contenido incluido en la página 13
Manual Channel Search You can use manual channel search if you want to add new channels later. For example If you have a special antenna configuration which is not assigned in the “Antenna alternative” menu, you can add new channels using the “manual channel search” function. When you perform a Manual Search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available in magazines covering satellite TV reception, on
Resumen del contenido incluido en la página 14
TV Screen Format 4:3 If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select “ (Pan & Scan) 4:3 (Letterbox) 4:3 (Pan & Scan) ” or “ ” to change display format. “ ” will fill up the 4:3 screen vertically, but cut off some information from the left and right sides of the picture. “ (Letterbox) ” will give a complete picture, but leave black areas at the top and bottom. System setting User You can select the TV screen format in the “ ” menu which is
Resumen del contenido incluido en la página 15
TV Guide GUIDE By pressing the button you obtain access to the TV Guide which gives the titles of the current programmes on LEFT RIGHT the different channels. By pressing the or button you also can also obtain information about the next programme. The minimized viewing window also helps you to select Up/Down channels and information. Use the buttons to move the cursor to different programme areas. You can obtain i extended information for a programme by pressing the “ ” button.
Resumen del contenido incluido en la página 16
List of Radio Channels While listening to radio Programmes you can see a programme OK list on the screen by pressing the button. You can change UP/DOWN to another channel by pressing the buttons and OK then pressing the button. To move faster (8 at the time) DOUBLE ARROW between the channels you can also use the buttons. Video Recorder With a Video Cassette Recorder (VCR) connected you can watch/record video tapes. If your VCR is connected with a SCART cable and you pres
Resumen del contenido incluido en la página 17
TV Channels and Radio Channels TV/Radio Channels will show a list with the names of the different channels. To move faster within the list, use the DOUBLE ARROW OK buttons. Press to enter a marked channel. TV Guide and Radio Guide These guides will give you an overview of programme information from the TV/Radio channels. Step to different UP/DOWN channel numbers with the buttons. If you stop on a OK highlighted line and press , you will exit the
Resumen del contenido incluido en la página 18
Rearrange List If you have created several Favorite lists you can determine the sequence in which the lists will appear. To rearrange channels, select the list which you want to OK move using the button. Move the channels to the desired UP/DOWN OK. position using the button and press Rename List You can change the list name with the virtual keyboard on the screen. Type in the text you want using the remote control arrow keys. Please note that the “All TV” , “All Radio” , “F
Resumen del contenido incluido en la página 19
Rearrange Channels You can arrange the order of channels within your favorite lists. To rearrange channels, select the channel which you want to OK move using the button. Move the channels to the desired UP/DOWN OK. position using the button and press Remove Channels From here, when the “All TV” list is selected in the “Edit Channels” menu, you can remove channels. Please note. Channels deleted this way will be permanently removed. The only way to get them back is to perf
Resumen del contenido incluido en la página 20
Change access code From here you can change the access code from the standard 1234. DO NOT FORGET IT! Without it you do not have access to any of the functions where the code is required! If you forget it, you have to contact an Authorized Nokia Service Center to get help. Language Settings From here you can change the language for the menus, main audio language and alternative audio language. System Settings From here you can adjust settings concerning your TV.
